Page 2 - DECLARATION OF CONFORMITY; Important Information
DECLARATION OF CONFORMITY This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. U....
Page 3 - IMPORTANT INFORMATION; TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT; CAUTION
1 E IMPORTANT INFORMATION WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. RISK OF ELECTRIC SHOCKDO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.NO USER-SERVICEABLE PARTS INSIDE.REFER SERVICING TO QUALIFIED ...
Page 4 - Declaration; Declaration of the Manufacturer
2 E • When operating the LCD monitor with an AC 100-120V power supply in North America, use a power supply cord provided with this monitor. • When operating the LCD monitor with an AC 220-240V power supply in Europe, use a power supply cord provided with this monitor. • In UK, use a BS-approved powe...
Page 5 - SAFETY PRECAUTIONS; DEAR MITSUBISHI CUSTOMER
3 E Thank you for your purchase of a MITSUBISHI LCD product. To ensure safety and many years of trouble-free operation of your product, please read the Safety Precautions carefully before using this product. SAFETY PRECAUTIONS Electricity is used to perform many useful functions, but it can also cau...
Page 7 - The Power Cord; TIPS AND SAFETY INSTRUCTIONS
5 E - The TFT colour LCD panel used in this monitor is made with the application of high precision technology. However, there may be minute points on the screen where pixels never light or are permanently lit. Also, if the screen is viewed from an acute angle there may be uneven colours or brightnes...
Page 8 - Contents
6 E Contents Introduction IMPORTANT INFORMATION ............................................1DEAR MITSUBISHI CUSTOMER .....................................3SAFETY PRECAUTIONS ..................................................3TIPS AND SAFETY INSTRUCTIONS ...............................5Supplied Acce...
Page 9 - Supplied Accessories; Part Names; Front view
7 E Supplied Accessories If any component should be missing, please contact your dealer. Liquid Crystal Display: 1 Remote control unit: 1 Power cord: 1 R-6 battery: 2 CD-ROM (Utility Disk for Windows): 1 Operation manual: 1 Stand hole protection cover: 2 * MITSUBISHI ELECTRIC CORPORATION holds autho...
Page 11 - How to Install the Monitor; Mounting precautions
9 E How to Install the Monitor Mounting precautions • Since the monitor is heavy, consult your dealer before installing, removing or moving the monitor. • When installing, removing or moving the monitor, ensure that this is carried out by at least 3 people. • When moving the monitor, be sure to hold...
Page 12 - Connecting Peripheral Equipment; Connection with a PC; Connection with AV equipment
10 E Connecting Peripheral Equipment Caution • Be sure to turn off the main power switch and disconnect the plug from the power outlet before connecting/disconnecting cables. Also, read the manual of the equipment to be connected. • Be careful not to mix up the input terminal with the output termina...
Page 13 - Other terminals; Connecting external speakers; Connecting multiple monitors
E 11 Connecting Peripheral Equipment Other terminals PC/AV audio output terminals • Audio from the equipment connected to the AV audio input terminals or PC audio input terminal is output. Connect to the audio input terminals of the connected equipment using a commercially available audio cable (RCA...
Page 14 - Remote control operation range; Preparing the Remote Control Unit
12 E Installing and removing the remote control batteries How to install the batteries 1. Press the cover gently and slide it in the direction of the arrow. 2. See the instructions in the compartment and put in the supplied batteries (2 R-6 batteries) with their plus (+) and minus (-) sides oriented...
Page 15 - Removing the Temporary Stand and the Handles; Removing the Temporary Stand; Removing the Handles
13 E Removing the Temporary Stand and the Handles n Removing the Temporary Stand Prepare wall-hanging brackets or a stand to mount the monitor unit. Read the manual for the brackets or stand for the proper mounting procedure. (The screw holes for mounting brackets (M10 x 4 holes) are provided on the...
Page 16 - Turning on the main power; Disabling power on/off operations
14 E Turning Power On/Off Caution • Turn on the monitor fi rst before turning on the PC or playback device. Turning on the main power Main power switch When the main power switch is off, the monitor cannot be turned on using the POWER button on the remote control unit. Turning power on/off Press the...
Page 17 - Basic Operation
15 E Basic Operation 1 2 34 5 6 7 8 1. INPUT (Input mode selection) The menu is displayed. Press or to select the input mode, and press to enter. * You can select the input terminal by pressing the input switch of the monitor. Input mode Video Audio PC1 DIGITAL *1 PC1 input terminal PC audio input t...
Page 19 - Menu Items; Displaying the menu screen; Example of operation; Menu screen display
17 E Menu Items Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 18 to 20 for details of each menu items. n Example of operation (Adjusting CONTRAST in the PICTURE menu) 1. Press MENU to d...
Page 20 - Menu item details; PICTURE; AUDIO
E 18 Menu item details The menu will differ depending on the input mode. n SCREEN (PC2/PC3) AUTO The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted.Pressing performs adjustment. Use this automatic adjustment when you use the PC2 input terminal or PC3 input terminals to display a PC screen...
Page 21 - SETUP; ABC; OPTION
E 19 n SETUP OSD H-POSITION Adjusts the horizontal display position of menu screen. OSD V-POSITION Adjusts the vertical display position of menu screen. SCREEN MOTION Residual images are reduced by moving the screen.PATTERN 1 .... The whole screen moves vertically and horizontally. PATTERN 2 .... A ...
Page 22 - Dual screen display
E 20 Menu Items TIPS • When WHITE BALANCE is set to THRU, BLACK LEVEL, CONTRAST and GAMMA cannot be set. • If COLOR MODE is set to sRGB or VIVID, the following items cannot be set.WHITE BALANCE, PRESET, R-/G-/B-CONTRAST, COPY TO USER, and GAMMA n Dual screen display You can display the screens of th...
Page 24 - Adjustments for PC screen display; Automatic adjustment; Screen display for adjustment
E 22 Adjustments for PC screen display n Automatic adjustment When you use the PC2 input terminal or PC3 input terminals to display a PC screen for the fi rst time, or when you change the setting of the PC, use the automatic screen adjustment. 1. Switch the input to PC2 or to PC3 and display the adj...
Page 26 - Controlling the Monitor with a PC; PC connection; Daisy chain connection...; Communication conditions; Command format
24 E Controlling the Monitor with a PC You can control this monitor from a PC via RS-232C (COM port) on the PC.You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 25), you can make input mode selection/adjustment or can check the ...
Page 27 - Communication interval; ID numbers
E 25 Controlling the Monitor with a PC n Response code format When a command has been executed correctly O K Return code(0D H , 0A H ) A response is returned after a command is executed. * If an ID number has been assigned O K SPC 0 0 1 ID number of responding monitor Space (20 H ) Return code(0D H ...
Page 30 - RS-232C command table; Power control/Input mode selection
E 28 RS-232C command table How to read the command table Command: Command fi eld (See page 24.) Direction: W When the “Parameter” is set in the parameter fi eld (see page 24), the command functions as described under “Control/Response Contents”. R The returned value indicated under “Reply” can be ob...
Page 34 - Troubleshooting; Warning when temperature rises
32 E Troubleshooting Before calling for repair services, make sure following checks for possible remedies to the encountered symptoms. There is no picture or sound. • Is the power cord disconnected? (See page 12.)• Is the main power switch set to “OFF”? (See page 14.)• Is the monitor in standby mode...
Page 35 - Product Speci
33 E Speci fi cations n Product Speci fi cations Model LDT651PLCD element 65" wide (163.9 cm diagonal) ASV low-reflection black TFT LCD Max. resolution (pixels) 1080 x 1920 Max. colours 16.77 M colours (8 bits/colour) Pixel pitch 0.744 mm (H) x 0.744 mm (V) Viewing angle 176° right/left/up/down ...
Page 38 - M E M O
Page 40 - MITSUBISHI Contact Information
North America MESCA (Mitsubishi Electric Sales Canada Inc.) http://www.mitsubishielectric.ca Information Technologies Group, 4299 14th Avenue, Markham, Ontario L3R 0J2, Canada Sales Phone :+1-(905) 475-7728 Fax :+1-(905) 475-7958 E-mail :[email protected] Technical Phone :+1-(905) 475-7728 Fax :+1-(...
