Page 2 - CAUTION; TO REDUCE THE RISK OF ELECTRIC SHOCK,; This apparatus must be grounded.; WARNING
EN – 2 RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intendedto ale...
Page 3 - ENGLISH; Contents; Trademark, Registered trademark
EN – 3 ENGLISH Contents Important safeguards ........................................................................... 4 Overview ............................................................................................... 6 Using the remote control ................................................
Page 4 - Important safeguards; as this can result in a fire or electric shock.
EN – 4 Important safeguards Please read all these instructions regarding your LCDprojector and retain them for future reference. Followall warnings and instructions marked on the LCD pro-jector. 1. Read instructionsAll the safety and operating instructions shouldbe read before the appliance is opera...
Page 6 - Overview; Control panel
EN – 6 Overview LAMP VOLUME ZOOM/ FOCUS TEMP VIDEO ENTER COMPUTER MUTE AUTO POSITION MENU 1 2 3 4 5 11 10 9 8 7 6 14 13 12 4 7 6 5 1 2 3 8 9 10 L R AUDIO VIDEO S-VIDEO MAIN AC IN AUDIO OUT VIDEO 1 IN VIDEO 2 IN COMPUTER OUT AUDIO 2 IN COMPUTER 2 IN AUDIO 1 IN COMPUTER 1 IN O I 1 2 3 4 5 6 7 8 9 10 1...
Page 7 - Bottom side; About laser beam; Remote control
EN – 7 ENGLISH Bottom side About laser beam This remote control is class 2 (max. output 1 mW laserdiode 645 nm) laser equipment. LASER RADIATIONDO NOT STARE INTO BEAM WAVE LENGTH : 645nmMAX OUTPUT : 1mWCLASS II LASER PRODUCT CAUTION 1 3 2 4 5 1 Release buttons (Left/Right) 2 Adjustment foot (Left/Ri...
Page 8 - • When the remote control is connected with remote; Using the remote control
EN – 8 Battery installation Use two AA size batteries.1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). 3. Replace the back cover. Important:...
Page 9 - Installation; Orientation of the projector; Front projection; • Refer to the chart for recom-; Front projection, ceiling mount; screen; Screen
EN – 9 ENGLISH Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distancebetween the projector and screen:Multiply the width of the screen ✕ 1.9 (min.) , Multiply the width of the ...
Page 10 - Basic connections; Projector + AV equipment; the same time, the normal video input automatically is inhibited.; Projector + DVD player or HDTV decoder; Some DVD players have output terminal for 3 line fitting (Y, C; Connecting with DVD player
EN – 10 Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal com-puters having analog RGB output. Important: • Make sure that your equipment is turned off before connection.• Plug in firmly and unplug by holding the plug, not by ...
Page 11 - RGB cable for PC; For Macintosh; RGB cable for PC; Projector + Personal computer; this projector. Please contact your dealer.
EN – 11 ENGLISH Connection For IBM PC or IBM PC compatibles to monitor port computer PC audio cable (optional) RGB cable for PC RGB cable for PC(optional) to AUDIO IN to PC audio output to PC monitor to COMPUTER IN to COMPUTER OUT When outputting to both a PC monitor and the projector. For Macintosh...
Page 12 - Preparing the projector for operation; Getting ready for projection
EN – 12 Adjustment foot screen Preparing the projector for operation Getting ready for projection 1. Connect the power cord provided to the projector.2. Connect the power cord to the wall power outlet.3. Remove the lens cap. Warning: • Do not look directly into the lens when projector is “ON”. • The...
Page 13 - To operate projector power ON; STILL button
EN – 13 ENGLISH To operate projector power ON • The picture might not be of optimum performance in extreme hot or cold conditions. (The projector isnot malfunctioning.) 4. Select the desired external input source by using the COMPUTER or VIDEO button. • The projector automatically selects the approp...
Page 14 - Turning off the projector; AUTO POSITION button
EN – 14 Turning off the projector 9. Press the POWER button. The message “POWER OFF? YES : PRESS AGAIN” appears on the screen. • To exit from this mode, press any button except POWER, LASER, mouse pointer, R/L-click,STILL and VOLUME + and - buttons. 10.Press the POWER button again. The light source ...
Page 15 - Basic operation; Menu operation
EN – 15 ENGLISH Basic operation Several settings can be adjusted using Menu. EXAMPLE: Auto power off time setting 1. Press the MENU button. 2. Press the $ or % button to select the OPTION menu. 3. Press the ENTER button (or } button). 4. Press the { or } button to select AUTO POWER OFF. 5. Press the...
Page 17 - that the image is not blurred.
EN – 17 ENGLISH 5 SIGNAL HORIZ. POSITION .... Use to adjust the horizontal position of the image.VERT. POSITION ..... Use to adjust the vertical position of the image.FINE SYNC. ....... Use to synchronize the projector with PC input signals so that the image is not blurred. TRACKING ......... Use to...
Page 18 - Picture adjustment
EN – 18 Adjusting the image You can adjust the picture by using the IMAGE menu. EXAMPLE: USER setting of COLOR TEMP.1. Select COLOR TEMP in IMAGE menu.2. Press the $ or % button to select 4 2 . 3. Press the ENTER button. 4. Press the { or } button to select the desired item. 5. Press the $ or % butt...
Page 21 - Advanced features for presentation; Expand; Using the Expand mode; Still
EN – 21 ENGLISH Advanced features for presentation Expand By pressing the EXPAND button on the remote con-trol, you can view the detailed image of the picture.You can also view the screen diplaying the picture asits original size (real screen display) by pressing thebutton again. Using the Expand mo...
Page 22 - Projector + PC with USB connector; Operation; Projector + Macintosh; dows; Projector + IBM PC or IBM PC compatibles; Advanced features for presentation (continued)
EN – 22 Mouse remote control By connecting to personal computer through the USB, PS/2 or ADB port, you can operate your computer with theprojector remote control. Connection Projector + PC with USB connector Operation Projector + Macintosh • Turn off personal computer and the projector before connec...
Page 23 - The life of the lamp; Lamp replacement
EN – 23 ENGLISH The lamp is designed to project the image on the LCDpanels. When the lamp no longer functions, replace itwith a new one. Caution: • Do not remove the lamp immediately after using the projector, you may get burned because of thehigh temperature of the lamp. • When you replace the lamp...
Page 24 - Maintenance; Cleaning the air-filter; For bottom air outlet slots; Cleaning the lens
EN – 24 Maintenance Caution: Be sure to turn off the projector and unplug the powercord from the wall outlet before you perform any main-tenance on the projector. Cleaning the air-filter This projector has two air-filters, for bottom air-outletslots and for front air outlet slots. Clean the air-filt...
Page 25 - Troubleshooting; CAUSE; POWER indicator does not light up.; • Screen size exceeds screen size specifications.; POSSIBLE SOLUTIONS; The image is
EN – 25 ENGLISH Troubleshooting The following offers solutions to some of the common problems you may encounter. We suggest that you consultthis chart before contacting your dealer. CAUSE • The air inlet slots, outlet slots or air filter is clogged with dust or some objects. POWER indicator does not...
Page 26 - Indicators; Normal condition; Unusual temperature
EN – 26 Indicators The projector has three indicators each of which shows the working condition of the projector. The following offers solutions to possible problems. If a problem persists, turn the projector off and consult yourdealer. POWER indicator LAMP indicator TEMP indicator LAMP VOLUME ZOOM/...
Page 27 - Specifications; Kensington Lock
EN – 27 ENGLISH Specifications LCD projector LVP-X250U | LVP-S250U AC100 ~ 240V, 50 / 60Hz 2.9 A LVP-X250U LVP-S250U 1.3-inch LCD panel: 3 pieces (for R, G, B) 1.3-inch LCD panel: 3 pieces (for R, G, B) Pixels 1,024 × 768 = 786,432 pixels Pixels 800 × 600 = 480,000 pixels Total 2,359,296 pixels Tota...
Page 28 - Connectors; PC analog RGB input; SPEC; What’s included in the box
EN – 28 1 Remote control 939P790-40 1 Remote control cable 246C217-30 1 User’s manual 871D293-30 1 Quick reference card 857B017-10 2 Battery for remote – Connectors PC analog RGB input Use to input video signals (analog RGB) of a personal computer. (Pin assignment of Mini D-SUB 15P jack) PIN NO. SPE...
