Page 3 - Table of Contents
i Table of Contents 1 Important Safety Instructions .......................................... 1 1 2 Features............................................................................. 2 2 3 3 Unpacking the Monitor ..................................................... 3 4 Hardware Installation ......
Page 4 - ii; Disclaimer; Reference Information; Monitor Information
ii Disclaimer Mitsubishi Electric Australia Pty. Ltd. makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, Mitsubishi Electric Australia rese...
Page 5 - Important Safety Instructions; covers may expose you to dangerous voltages or other hazards.
1 1 1 1 Important Safety Instructions Please read the following safety instructions before installing or cleaning your Diamond Digital monitor: 1. Unplug the monitor’s power cable from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a soft cloth to clean the monitor housi...
Page 6 - Features; Your DV191 Monitor features:
2 2 2 2 Features Your DV191 Monitor features: ♦ XGA (1280 x 1024 pixel) Resolution LCD Panel ♦ High Brightness Level – 300 cd/m 2 (typical) ♦ High Contrast Ratio – 700:1 (typical) ♦ True Colour Display With 16.2M (RGB 6bit data) colour, the DV191 monitor offers you better image quality. ♦ High Quali...
Page 7 - Unpacking the Monitor; immediately; LCD monitor; VGA Cable
3 3 3 3 Unpacking the Monitor Please check that the following items are included with your monitor. If they are missing or damaged, please contact your place of purchase immediately . LCD monitor User’s Manual Use r's Ma nua l DVI-D Cable VGA Cable
Page 9 - Hardware Installation; Connecting the Monitor Base; Using the DVI cable; Power off your computer.
5 5 4 4 Hardware Installation Connecting the Monitor Base Remove the base from the packing box and place it on the desk. Next, remove the LCD display and carefully seat it on the base. (See fig.1-1 ) Figure 1-1 Viewing Angle Adjustment The LCD Monitor is designed to allow users to have a comfortable...
Page 10 - for the monitor stand and pull it; Interface for Arm Applications
6 6 Connecting the AC Power 1. Connect the power cord to the AC socket. (See Fig. 1-4) 2. Connect the power cord to an AC power source. Figure 1-4 Connecting the Audio Cable 1. Connect the audio cable to the Line Out jack on your PC's sound card. (See Fig. 1-5) 2. Connect the other end of the audio ...
Page 11 - Windows driver Installation; drivers are required for installation.; Add New Hardware; Just follow the prompts to load the native Plug and Play drivers.; Windows XP; XP will automatically load the native Plug and Play drivers.
7 7 5 5 Windows driver Installation The DV191 is fully Windows Plug and Play compatible so no specific Windows drivers are required for installation. Windows 98, ME, and 2000 The first time you start Windows after connecting your new monitor, the system will detect the monitor and automatically star...
Page 12 - Setting the Display Resolution; Choosing The Best Resolution; Display; For Windows NT users only:; Test
8 8 6 6 Setting the Display Resolution Choosing The Best Resolution All Liquid Crystal Displays (LCDs) have a fixed resolution that is the same as the maximum resolution that may be displayed on the LCD. In the case of the DV191 the LCD resolution is 1280 x 1024 pixels. This is also known as the “na...
Page 13 - Table 1
9 9 If you are using an Apple Macintosh, change the resolution by doing the following: MacOS 8.x/9.x 1. Click the Apple icon at the top, left corner of the screen, select Control Panel and then select Monitors . 2. Select a resolution of 1280 x 1024 pixels with between 60Hz and 75Hz refresh rate. 3....
Page 15 - Standard Timing Table; most suitable available timing.
11 11 Table 1 Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. Resolution Horzontal Frequency (kHz) Vertical Frequency (Hz) Dot Clock Frequency (MHz) Remark 640x350 31.469 70.087 25.175 DOS 640x400 24.83 56.42 ...
Page 16 - Adjusting the Monitor; User Controls; Stereo; PC Audio Stereo output.; Power Switch; Turns the display on and off.
12 12 7 7 Adjusting the Monitor User Controls A brief description and the location of all LCD Monitor function controls and indicators: Figure 2-1 1 Stereo Speakers PC Audio Stereo output. 2 Speaker Volume Control Use to adjust the speaker volume (clockwise to increase, anti-clockwise to decrease). ...
Page 17 - Adjusting the Monitor's Display; OSD Function Menu; Function Description; Icon
13 13 6 Adjustment Control Buttons Press the left button to decrease the OSD setting and press the right button to increase the OSD setting, when OSD menu is displaying. 7 External Headphone Jack The monitor speakers will be disabled when using an external headphone or external speakers. Adjusting t...
Page 18 - User
14 14 OSD Transparency This function let's you set the transparency of the OSD menu (Not available when using DVI). Phase This lets you adjust the phase of the pixel clock to eliminate sampling noise (Not available when using DVI). Clock Adjusts the sampling frequency for the Analogue (VGA) to Digit...
Page 19 - Picture Optimisation; Manual Picture Adjustment
15 15 Picture Optimisation The easiest way to obtain an optimal picture is by using the Auto function in the OSD menu. This only works reliably if the graphics adaptor is set to use one of the monitor’s factory modes (see Table 1 in the previous chapter) and if you are displaying a suitable stationa...
Page 21 - Frequently Asked Questions; The image is blurred, how can I get the best quality picture?
17 17 8 8 Frequently Asked Questions The image is blurred, how can I get the best quality picture? ♦ Read chapter 6, Setting the Display Resolution , and select a graphics signal with the correct resolution and refresh rate. Then read chapter 7, Adjusting the Monitor , and make adjustments to the di...
Page 22 - The image is or distorted, flashes or flickers:
18 18 No image is displayed, what can I do? ♦ Check that the light (LED) next to the monitor’s power button is lit and is green in colour. If the LED is green, press one of the Function Select buttons on the monitor to access the On Screen Display. If the message NON PRESET MODE appears there, pleas...
Page 23 - Specifications; Display Characteristics; Including 12 VESA & 3 DOS
19 19 9 9 Specifications Model: Diamond View DV191 Display Characteristics Display Type 19“ active matrix Thin Film Transistor Liquid Crystal Display Viewable Diagonal Area 48 cm / 19” Native (Maximum) Resolution 1280 x 1024 pixels Colours 16.2 million (RGB 6 bit Data) Contrast Ratio 700:1 (typical)...
Page 24 - Input Signal; 4 – 80kHz multi-frequency; Physical Characteristics; VESA DPMS, Energy Star; Regulatory Certification
20 20 Input Signal Line Frequency 24 – 80kHz multi-frequency Image Frequency (Refresh Rate) 56 - 76Hz Video Signal RGB analogue (Positive polarity) 0.7 Vpp/75 Ohm Synchronization TTL separate, composite TTL Signal Connection 15-pin mini D-sub and 24 pin DVI-D connectors Physical Characteristics Powe...
Page 25 - Service Contacts; Australian Service Contacts
21 21 1 1 0 0 Service Contacts If problems remain after checking this manual, please contact your place of purchase or contact: Australian Service Contacts Visit the Customer Support section of Mitsubishi Electric Australia’s web site at www.mitsubishielectric.com.au for details of your nearest Mits...
