Page 3 - TABLE OF CONTENTS
1 TABLE OF CONTENTS 1. 2. 3. 4. 5. 6. 7. 8. SAFETY INSTRUCTIONS AND MAINTENANCE .................................... 3 INTRODUCTION............................................................................................. 4 U NPACKING THE M ONITOR ....................................................
Page 5 - Safety Instructions and Maintenance; Safety Instructions
1 Safety Instructions and Maintenance Safety Instructions z The power supply cord connects the monitor to the electrical mains power supply. The socket outlet shall be near the monitor and shall be easily accessible. z This monitor should be operated from the type of power indicated on the rating la...
Page 6 - Introduction; Unpacking the Monitor; High Resolution
2 Introduction Unpacking the Monitor Check following items. If they are missing or damaged, consult your place of purchase immediately. z Diamond View DV180 TFT LCD monitor with signal cable and built-in USB hub z Floppy diskette containing Windows 95, 98 and 2000 drivers, and the test pattern displ...
Page 8 - Installing the Monitor
Installing the Monitor 6 The DV180 monitor is equipped with an auto-sensing power supply that will operate within the voltage range of 100 to 240 Volts AC, at 50~60 Hz. 3 1. Make sure that the system power is turned off. 2. Plug the signal cable into the VGA signal connector at the rear of the PC. 3...
Page 9 - Connecting the Microphone; Connecting the Speaker
Connecting the Microphone After connecting the microphone to the computer’s sound card, you can use it for video conferencing, to record or edit audio files and for many other applications. 1. Turn the computer system off. 2. Plug one end of audio cable into the LINE IN port at the rear of the compu...
Page 10 - Connecting Headphones
) To adjust the audio volume, use the volume control at the right side of your monitor. Connecting Headphones Plug your headphones into the headphone connector at the rear of monitor to avoid disturbing others while still being able to hear audio through the monitor. 8
Page 11 - Connecting USB Devices
Connecting USB Devices With the Diamond View DV180’s built-in hub, you can easily connect up to 4 USB devices to the computer via the hub. To connect the USB hub to the PC: 1. Turn the system power off. 2. Connect the USB cable to the computer and to the upstream USB port at the rear of monitor. 3. ...
Page 12 - Setting up and Using the DV180; The Control Panel; Audio Volume Control:; Using Your Monitor for the First Time
4 Setting up and Using the DV180 The Control Panel Auto Adjust.Wheel Power Switch: Turns the monitor on or off. AutoKey: Automatically adjusts the display’s colour temperature, Horizontal Position, Vertical Position, Clock Phase and Pixel Clock. Adj. (Adjust) Wheel: Rotate and press this to access t...
Page 13 - Automatic Image Adjustment; AUTO; Other Operating Systems; AUTO
11 Automatic Image Adjustment The easiest way to set up the monitor is to display the adjustment test pattern and use the monitor’s AUTO button. The display must be adjusted manually if the test pattern is not available. Please refer to Manual Display Setup on page 18 for details. The display must b...
Page 15 - The On Screen Display; The Luminance Menu; Contrast; Brightness
The On Screen Display The On Screen Display (OSD) allows you to adjust the image displayed on the monitor for optimum image clarity and comfortable viewing. A description of the OSD’s menus and their use follows: 1. The Luminance Menu 1. Press the Adjustment wheel to display the main menu. The first...
Page 16 - The Geometry Menu
2. The Geometry Menu OSD Icon Description Hor. (horizontal) Position Adjusts the horizontal position of the display. Ver. (vertical) Position 14 Adjusts the vertical position of the display. Phase Adjusts the phase of pixel clock. It can improve the focus and stability of your screen as well. Pixel ...
Page 17 - Colour Adjustment; Recall Factory Settings
3. Colour Adjustment Turn the Adjustment wheel to select the colour that you wish to change. Press the wheel again and turn it to adjust the level of that colour. If you want to recall a factory preset colour, select and press the wheel. OSD Icon Description Factory Default Recall Recall the preset ...
Page 18 - Miscellaneous
If you are using a signal with a timing that is not listed on the preset timing table, "Non Preset Mode" will be shown on this page. 5. Miscellaneous OSD Position OSD Icon Description Hor. (horizontal) Position adjusts horizontal position of the OSD. 16 Ver. (vertical) Position adjusts verti...
Page 19 - Return
ON Enlarges the image to full screen size. If your image already takes up the full screen, this function has no affect. OFF Reduces the screen size. Language Selection De: Deutsche En : English Es : Español Fr : Français It : Italiano Ja : Japanese Return Return to last OSD. 6. Return Return : exits...
Page 21 - Supported Graphics Signals and Timings
Supported Graphics Signals and Timings Input Signal from the Computer Multi-scan operation 5 Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Dot Clock Frequency (MHz) Remark Actual display resolution 640 x 350 31.47 70.08 25.17 DOS 19 640 x 350 37.86 85.10 31.50 VESA 720 x 400 31.47 70...
Page 23 - Troubleshooting and Useful Hints; Troubleshooting
6 Troubleshooting and Useful Hints Troubleshooting If you encounter any problems using this product, make sure that your monitor is properly installed. Please refer to chapter 4 of this manual for the installation guide. The answers to some common questions follow: 9 There is some noise or flickerin...
Page 26 - Specifications
24 Specifications 7 LCD Panel 18.1” (46 cm) diagonal Active Matrix TFT Maximum Resolution 1280 x 1024 pixels at 75 Hz refresh rate Display Area 359 mm (H) x 287 mm (V) Brightness 235 cd/m² (typical) Contrast Ratio 300:1 Video Input Analogue RGB Horizontal Scanning 31.5 ~ 80 kHz Vertical Scanning 56 ...
Page 27 - Contacting Mitsubishi Electric; Australia; New Zealand
8 Contacting Mitsubishi Electric Australia Address: Mitsubishi Electric Australia Pty. Ltd. 348 Victoria Road, Rydalmere, NSW, 2116 Telephone: (02) 9684-7777 Fax: (02) 9898-0484 Web site: http://www.mitsubishi-electric.com.au Tech. Support: [email protected] New Zealand Address: MELCO New Zealand Lt...
