Mitsubishi 1554R- User Manual

iii Maintenance ✘ Do not expose the monitor to direct sunlight or heat. ✘ Do not spill liquid onto the monitor. ✘ Do not attempt to open the monitor. You may be hurt by electric shock. For service, call your place of purchase. Opening your monitor may also void warranty. ✘ Do not use your monitor wh...

1 Introduction Unpacking the Package Check following items. If they are missing or damaged, consult your place of purchase immediately. 9 Colour monitor 9 Swivel base 9 User’s manual 9 Power cord Locate the model name and the serial number labeled on the back of your monitor. Write down the related ...

2 9 Power Saving Function The power management complies with VESA DPMS standard. When the system is idle (off mode), the monitor automatically cuts its power consumption up to 95%. 9 Green Commitment No CFCs are used in the manufacturing process of your monitor. It complies with the US government’s ...

3 Getting Started Installing the Monitor This monitor is equipped with an autosensing power supply for voltage ranges 100~240V AC, 50~60Hz. To install the monitor : 1. Make sure that the system power is turned off. 2. Please refer to the instructions below to connect the signal cable through D-SUB ....

4 Connecting through D-SUB signal connector 1. Make sure that the system power is turned off. 2. Connect the computer end of the D-SUB cable to the 15-pin output connector on the video board of your computer. ) To connect the monitor to an older type Apple Macintosh through a D-Sub cable, you need t...

5 Adjusting the Monitor Control Functions The monitor digital control functions are located on the front panel (see the illustration below). They are described in the following sections. 1. Power Switch Pincushion Horizontal Size 2. Adjust Vertical Center Contrast 3. Select Vertical Size Brightness ...

6 Select / Adjust Press the SELECT + or - button to cycle through the adjustment options to choose H-Phase, H-Size, V-Center, V-Size, Contrast, Brightness, Trapezoid, Pincushion and Rotation. And then press ADJUST + or - button to change the settings. Recall Recall all settings to factory defaults b...

7 Troubleshooting and Useful Hints Troubleshooting Make sure that your monitor is properly installed if you encounter any trouble using this product (For hardware installation, see Chapter 2, Getting Started ). If the problems persist, check this chapter for possible solutions. 9 There is no picture...

9 Specifications Picture Tube Size Type Dot pitch Surface coating 15” (38.1cm) diagonal FST 0.28mm AG, AS coating Maximum Viewable Size 13.9” (35.4cm) diagonal Power Supply (Universal) Input voltage Power consumption(Max.) 100~240 V AC, 50~60 Hz (Universal) 75 w Max. Resolution 1024 x 768 Horizontal...