Milwaukee 3453-22 - User Manual
Milwaukee 3453-22 Impact Driver – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – WARNING
- Page 4 – ASSEMBLY; OPERATION
- Page 5 – Impacting Techniques; MAINTENANCE; battery pack from the charger or tool before; Maintaining Tool; your tool, battery pack or charger in liquid or; Cleaning; ACCESSORIES; SERVICE - UNITED STATES
- Page 6 – AVERTISSEMENT
- Page 7 – ne permet pas de le mettre en marche ou de; UTILISATION ET ENTRETIEN; entre en contact avec les yeux, consulter un; ENTRETIEN
- Page 8 – • Porter des protège-oreilles avec un marteau; travaux sont faits dans de situations pous-; Insertion/Retrait de la batterie; retirer; Toujours verrouiller la
- Page 9 – MANIEMENT; Utilisation du commutateur
- Page 10 – Entretien de l’outil; Nettoyage; ACCESOIRES; GARANTIE LIMITÉE -
- Page 11 – ADVERTENCIA; • Mantenga a los niños y a los espectadores alejados
- Page 13 – Como se inserta/quita la batería en la
- Page 14 – Cómo Colocar y Desmontar Accesorios; OPERACION; Indicador de carga; Utilización del interruptor de control
- Page 15 – MANTENIMIENTO; Mantenimiento de las herramientas; Limpieza; ACCESORIOS; SOPORTE DE SERVICIO - MEXICO
- Page 16 – MILWAUKEE TOOL; PÓLIZA DE GARANTÍA - VALIDA
Cat. No. / No de cat.
3453-20
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
WARNING
To reduce the risk of injury, user must read and understand operator's manual.
AVERTISSEMENT
Afin de réduire le risque de blessures, l'utilisateur doit lire et bien
comprendre le manuel.
ADVERTENCIA
Para reducir el riesgo de lesiones, el usuario debe leer y entender el manual.
M12 FUEL™ 1/4" HEX IMPACT DRIVER
TOURNEVIS À PERCUSSION HEXAGONAL DE 6 mm (1/4") DE
M12 FUEL™
DESTORNILLADOR DE IMPACTO HEXAGONAL DE 6 mm (1/4")
DE M12 FUEL™
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 GENERAL POWER TOOL SAFETY WARNINGS WARNING Read all safety warnings, instruc- tions, illustrations and specifica - tions provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for f...
4 Using the Drive Control The drive control button is 1 2 3 Speed Indicator Drive Control Button Tapping Screw Mode used to adjust the rota - tion speed (RPM) for the application. To select the drive con- trol mode: 1. Pull and release the trigger to turn on the tool. The current in - dicator is lit...
5 Impacting Techniques The longer a bolt, screw, or nut is impacted, the tighter it will become. To help prevent damaging the fasteners or workpieces, avoid excessive impact- ing. Be particularly careful when impacting smaller fasteners because they require less impacting to reach optimum torque. Pr...