Milwaukee 2810-20 - User Manual
Milwaukee 2810-20 Drill – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – MILWAUKEE
- Page 3 – US
- Page 4 – LIMITED WARRANTY - USA AND CANADA; Distributor or Store Stamp:
- Page 6 – Réglage de
- Page 7 – GARANTIE LIMITÉE - AUX ÉTATS-UNIS ET AU CANADA; GARANTIE LIMITÉE – MEXIQUE, AMÉRIQUE CENTRALE ET CARAÏBES
- Page 10 – PÓLIZA DE GARANTÍA - VALIDA SOLO PARA MÉXICO,; Sello del Distribuidor:
- Page 11 – MILWAUKEE TOOL; UNITED STATES; CENTRO DE ATENCION A CLIENTES; MEXICO; - Soporte de Servicio MILWAUKEE; Contacta nuestro servicio técnico para....; CANADA; MILWAUKEE Service
M18™ FUEL™ 1/2" DRILL/DRIVER AND HAMMER DRILL/DRIVER
PERCEUSE-VISSEUSE ET PERCEUSE À PERCUSSION DE
M18™ FUEL™ 13 mm (1/2")
TALADRO DESTORNILLADOR Y TALADRO DE PERCUSIÓN
DE 13 mm (1/2") M18™ FUEL™
Cat. No.
No de cat.
2703-20
2704-20
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S
MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN
COMPRENDRE LE MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL
MANUAL DEL OPERADOR.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 3 SPECIFICATIONS Cat. No. Volts DC No Load RPM BPM Steel Wood Masonry Flat Bit Auger Bit Hole Saw Screws (dia.) 2703-20 18 Low 0 - 550 High 0 - 2 000 ---- 1/2" 1-1/2" 1-1/2" 3" 3/8" -- 2704-20 18 Low 0 - 550 High 0 - 2 000 -- High 0 - 32,000 1/2" 1-1/2" 1-1/2" 3"...
4 5 OPERATION WARNING Always remove battery pack before changing or removing acces-sories. Only use accessories specifically recommended for this tool. Others may be hazardous. WARNING To reduce the risk of injury, wear safety goggles or glasses with side shields. Clutch Setting in. lbs Applications...
6 7 APPLICATIONS WARNING To reduce the risk of elec- tric shock, check work area for hidden pipes and wires before drilling or driving screws. Drilling in Wood, Composition Materials and Plastic When drilling in wood, composition materials and plastic, select the drill-only operating mode. Start the...