Miller Welder/Generator - Manual

Quick
Specs

Weld meters

— digital ammeter

and presettable voltmeter allow
monitoring of welding output for
each welder.

Multi-arc welding is here!

One

dependable engine and two high-
performance arcs allow operators
to work independent of each other.
It’s a one-of-a-kind, go-anywhere
engine drive.

Miller Du-Op

®

Engine-Driven

Welder/Generator

Issued May 2008 • Index No. ED/10.9

Thermal overload protection

prevents machine damage if the
duty cycle is exceeded or airflow
is blocked.

Two 14-pin remote controls

can

be used for precise adjustment
of amperage or voltage along
with contactor.

Increase profits

with this multi-arc

machine by completing even your
most demanding jobs in half the
time compared to conventional
engine-driven welders. With two
arcs in one engine drive, fewer
machines are required for a job.

Double the amperage output

with a switch that parallels both
outputs to a single side. This
provides a safe and easy way to
run large electrodes, stud weld,
or carbon-arc gouge.

5,500 watts of AC generator
power

independent of welding

output. Two 120 V, 20 A GFCI
duplex receptacles. Two 230 V,
20 A duplex receptacles.

Hot Start

™

provides positive stick

electrode starts to make it easy
to start all types of electrodes.

The Power of Blue

®

.

Welder/generator is warranted by Miller for 3 years, parts and labor.

Engine is warranted by Deutz for 2 years.

Miller Electric Mfg. Co.

An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA

Web Site

www.MillerWelds.com

International Headquarters

Phone: 920 -735-4505
USA FAX: 920 -735-4134
Canadian FAX: 920-735-4169
International FAX: 920 -735-4125

Heavy Industrial Applications

Pipe Welding
Structural

Processes

Stick (SMAW)
MIG (GMAW)
Flux Cored (FCAW)
DC TIG (GTAW)
Air Carbon Arc (CAC-A)

Single Weld Mode:

3/8 in (9.5 mm) Carbons

Dual Weld Mode:

1/4 in (6.4 mm) Carbons

Output Range

Single Weld Mode:

(Right side) CC/DC 30 – 600 A

Dual Weld Mode:

(Both sides) CC/DC 15 – 300 A

CV/DC 10 – 32 A

Weld Output Rated at 104°F (40°C)

Single Weld Mode:

550 A at 30 VDC, 40% Duty Cycle

Dual Weld Mode:

275 A at 31 VDC, 40% Duty Cycle

Generator Output Rated at 104°F (40°C)

5,500 Watts Peak — 4,000 Watts Continuous

Weight

Net: 2115 lb (959 kg) Ship: 2150 lb (975 kg)

Arc control (DIG)

allows the arc

characteristics to be changed for
specific applications and electrodes.
Smooth running 7018 or stiffer,
more penetrating 6010 electrodes.