Miele DA 6881 - User Manual

IMPORTANT SAFETY INSTRUCTIONS 6  Defective components should be replaced by Miele original parts only. Only with these parts can safety of the appliance be assured asintended by the manufacturer.  If the power cord is damaged, it must only be replaced by a qualified service technician.  During in...

IMPORTANT SAFETY INSTRUCTIONS 8  Always turn the ventilation hood on whenever a burner is in use to prevent damage from condensation.  Overheated oil and fat can ignite, causing fire damage to the ventilation system.Do not leave cookware, pans, and deep fryers unattended whencooking with oil or fa...

IMPORTANT SAFETY INSTRUCTIONS 10 Cleaning and maintenance  There is a risk of fire if cleaning is not completed according to the instructions in this manual.  Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a shortcircuit. Accessorie...

Caring for the environment 11 Disposal of the packingmaterial The cardboard box and packingmaterials protect the appliance duringshipping. They have been designed tobe biodegradable and recyclable. Ensure that any plastic wrappings,bags, etc. are disposed of safely andkept out of the reach of childr...

Description of functions 14 The following functions are available onyour ventilation hood, depending on themodel: Extraction mode (requires DAG 600 internal blower asoptional accessory) The cooking vapors are drawn in by theventilation system. The air is thenpassed via the edge extraction panelthrou...

Operation 15 Extending/retracting thecanopy, switching the bloweron/off Danger of crushing injuries!Do not reach into the motion rangeof the canopy while it is extending/retracting. Switch the blower on as soon as youstart cooking. This is to ensure thatvapors are captured right from the start.  To...

Cleaning and care 17  WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,OR INJURY TO PERSONS,OBSERVE THE FOLLOWING:  Before cleaning or servicing thehood, disconnect it from the powersupply, see “IMPORTANT SAFETYINSTRUCTIONS”. Stainless steel housing General information  The surfaces and contro...

Cleaning and care 20 OdorFree Charcoal Filter In recirculation mode with conversionkit DUU 2900, two charcoal filters arefitted into the recirculation unit. Refer tothe Operating and InstallationInstructions supplied. Alternatively for the DA 6891: Inrecirculation mode with conversion kitDUU 151, tw...

Installation *INSTALLATION* 21 Before installation  Before installing the appliance, read all of the information containedin this chapter and also in the“IMPORTANT SAFETYINSTRUCTIONS” section. Installation parts 2 lower brackets 2 upper brackets 2 support brackets 18 self-tapping screws ¹/₈" x ...

Installation *INSTALLATION* 22 Appliance dimensions 4 3 / 4 " 120m m

Installation *INSTALLATION* 24 Cabinet dimensions Exhaust or recirculation mode with DAG 600 blower installed at the front of thedowndraft. Exhaust ducting (   6" (150 mm))

Installation *INSTALLATION* 25 a Exhaust ducting to the right or left. b Exhaust ducting downwards. a) Overhang of the cooktop b) Cooktop cutout c If the downdraft and cooktop are installed in separate cutouts, ensure adequatestability of the strip in between. If the blower is to be installed at the...

Installation *INSTALLATION* 26 Support bracket A support bracket is mounted on thedowndraft. It serves as a support for thecooktop when the downdraft extractorand the cooktop are installed in acommon cutout  . In the following situations, the support bracket shouldbe replaced with two small anglebr...

Installation *INSTALLATION* 32  Secure the exhaust ducting to theexhaust socket, e.g., with a hose clip(available as an optional accessory)on flexible ducting. Vented mode  See “Connection for vented mode”for additional instructions onattaching the ducting. Recirculation mode If site conditions ar...

Air venting 33 WARNING: Danger of toxic fumes.Gas cooking appliances releasecarbon monoxide that can beharmful or fatal if inhaled.To reduce the risk of fire and toproperly exhaust air, the exhaustgases extracted by the hood shouldbe vented outside of the buildingonly.Do not vent exhaust air into sp...

Air venting 34 Reducing Collar (optional accessory) If you would like to reduce theenvironmental impact of your ventilationsystem by limiting the CFM output theReducing Collar can be installed. Itreduces the air flow to less than400 CFM. Check local building codesfor max. CFM requirements.  Push th...

Electrical connection *INSTALLATION* 35 WARNING: TO REDUCE THE RISKOF FIRE, ELECTRIC SHOCK, ORINJURY TO PERSONS, OBSERVETHE FOLLOWING:All electrical work should beperformed by a qualified electricianin strict accordance with nationalregulations (for USA: ANSI-NFPA 70)and local safety regulations.Ins...

Service and warranty 38 For faults that you cannot resolve onyour own, please contact your Mieledealer or Miele Technical Service. The telephone number for Miele is listedat the back of these instructions. When contacting Miele, please state themodel and serial number of yourventilation hood.These c...

Technical data 39 Total connected load with internal DAG 600 blower 346 W with external DAG 1000 blower 216 W Supply voltage, frequency 120 V AC, 60 Hz Fuse rating 15 A

9 Independence WayPrinceton, NJ 08540Phone:Fax:www.mieleusa.com U.S.A. Miele, Inc. National Headquarters Please have the model and serial numberof your appliance available whencontacting Technical Service. Canada ImporterMiele Limited Headquarters and Miele Centre 800-843-7231609-419-4298 Technical ...