Page 3 - Table of Contents; Managed CenturyStack
Table of Contents Managed CenturyStack ® 10/100Mbps Hub Network Management Guide Introduction ............................................................................................... 7 Overview of Managed CenturyStack 8100 Hub ........................ 7 Network Management .......................
Page 4 - CenturyStack 8100 Managed Hub
4 CenturyStack 8100 Managed Hub Out-of-Band Menu ............................................................... 22 SNMP Community ................................................................... 23 Trap Receiver ........................................................................... 24 Contr...
Page 7 - Introduction 7; Introduction; Overview of Managed CenturyStack 8100 Hub
Introduction 7 Introduction Overview of Managed CenturyStack 8100 Hub The Managed CenturyStack 8100 Hub is a series of auto sensing dualspeed, manageable and stackable hubs. The Managed CenturyStack Seriesconsists of masters and managed slaves with 12 or 24 ports. The featuresand functions of the Ma...
Page 11 - Introduction 11
Introduction 11 be issued. Managed CenturyStack RMON Management enables users to set up EventGroups. The Event Group Implementation of the Event Group is optional.The Event Group controls the generation and notification of events fromthe hub. Each entry in the event Table describes the parameters of...
Page 13 - Getting Started 13; Chapter 1; Getting Started; Web-based Management Requirements
Getting Started 13 Chapter 1 Getting Started Web-based Management Requirements Web-based Management allows comprehensive monitoring and configur-ing of the CenturyStack with the familiar interface of a Web browser. WebManagement uses photographic quality views and real-time updates ofhub activity. W...
Page 19 - Management Setup 19; Chapter 2; Management Setup; Network Configuration
Management Setup 19 Chapter 2 Management Setup Network Configuration The Network Configuration Menu enables users to configure connectionsto the CenturyStack hubs. The Ethernet Menu is used to setup Ethernetconnections. The Slip Menu is used to setup slip connections. TheConsole Menu is used to setu...
Page 20 - Please select Save to update the new configuration.
20 CenturyStack 8100 Managed Hub Slip MenuThe Slip Menu displays current Slip configurations and allows users tomake new slip configuration settings, IP Address and Subnet Mask. Network Configuration – Slip Menu Please select Save to update the new configuration.
Page 23 - To delete a community name, enter its string and select Delete.
Management Setup 23 SNMP Community The SNMP Community Setup Menu allows setting up a maximum of sixCommunity Names, setting Access Right and Status. SNMP Community Setup Menu To setup an SNMP community, enter a valid SNMP Community name inthe SNMP Community Name field. Set the Access Right (Read Onl...
Page 24 - To delete a trap receiver, enter its index number and select Delete.
24 CenturyStack 8100 Managed Hub Trap Receiver The Trap Receiver Setup Menu allows setting up a maximum of six trapreceivers. Users can setup trap receivers to receive traps when networkviolations occur. Trap Receiver Setup Menu To set up Trap Receivers enter an Index number, a SNMP Trap ReceiverNam...
Page 25 - Controlling CenturyStack Hubs 25; Chapter 3; Controlling CenturyStack Hubs
Controlling CenturyStack Hubs 25 Chapter 3 Controlling CenturyStack Hubs Users can control Managed CenturyStack Hubs by selecting DeviceControl from the main menu. The following lists the controls availableand a brief description of the control. Device Control Description Repeater Group Control/Stat...
Page 27 - Controlling CenturyStack Hubs 27
Controlling CenturyStack Hubs 27 Repeater Group Control – 2 To configure the Repeater Group Control, first select a group (1 – 6) andclick the Submit button, to load the configurations for the selected group.Next configure the items listed below and select Save, to update the newconfiguration. Repea...
Page 29 - Controlling CenturyStack Hubs 29
Controlling CenturyStack Hubs 29 Repeater Port Control-2 To configure repeater ports, first select the group (1 – 6) and selectSubmit to load the configurations for the selected group. Next select theport of the selected group that is to be configured. Then configure theitems listed below and select...
Page 31 - Controlling CenturyStack Hubs 31
Controlling CenturyStack Hubs 31 To configure the 3-Port Bridge Module, first select the group (1 – 6)where a module exists and select Submit. If a module exists in theselected group, it is indicated next to Description under CurrentConfiguration. Next, configure the items listed below and select Sa...
Page 32 - Configuring Link Pairs
32 CenturyStack ® 8100 Managed Hub Redundant Link Control The Redundant Link Control Menu allows configuring of up to 24 pairs ofredundant links within a stack. Users can ensure that all packets sent willreach their destination even in the event of a hub failure when Link Pairsare configured. Config...
Page 33 - Controlling CenturyStack Hubs 33
Controlling CenturyStack Hubs 33 6. Enable the Link Switch Over Notify. (Optional)7. Enable the Status.8. Select Save to update the new Linked Pair. Repeat these steps for each Link Pair. Editing a Link PairUsers can edit a Link Pair by entering the Link Pair number (of anexisting Link Pair) and rec...
Page 35 - Controlling CenturyStack Hubs 35
Controlling CenturyStack Hubs 35 Security Intrusion-2 To configure Security Intrusion: 1. Select a port number from the Port Number drop down list.2. Set the Intrusion Status.3. Set the Intrusion Auth Address Auto Learn.4. Enter the Intrusion Auth MAC Address.5. Set the Intrusion Action.6. Save Secu...
Page 37 - Monitoring the Network 37; Chapter 4; Monitoring the Network; Group Statistics Information
Monitoring the Network 37 Chapter 4 Monitoring the Network CenturyStack network management enables users to monitor networkstatistics counters. Counters can be monitored in relative and absolutevalues. Counters can be monitored for each segment, each group, and eachport. The Network Monitoring Menu ...
Page 38 - Port Statistics Information
38 CenturyStack 8100 Managed Hub To view the Repeater Group Statistics counter, select a group (1 – 6) fromthe Group Number drop down list. Next select the Display Mode andselect Submit to load the counters for the selected group. Repeater Group Statistics Counters Group Number Selected group’s Hub ...
Page 39 - Monitoring the Network 39
Monitoring the Network 39 Port Statistics Information Menu – 2 To view port statistic information, select a group (1 – 6) from the GroupNumber drop down list. Then select a port (1 – 12/24), set the DisplayMode and select Submit to load the counters for the selected port andgroup.
Page 47 - Monitoring the Network 47
Monitoring the Network 47 Broadcast Storm DetectedCenturyStack network management provides broadcast storm detection.If a broadcast storm is detected, the Broadcast Storm Detected Menudisplays the detected broadcast storm Group number, Port number, or thegroup number of the optional module.
Page 49 - Remote Network Monitoring 49; Chapter 5; Remote Network Monitoring
Remote Network Monitoring 49 Chapter 5 Remote Network Monitoring The CenturyStack Hub fully supports RMON Management Group 1, 2, 3,and 9. Users can setup for RMON Management using Web-BasedManagement or SNMP Management. Described here is detailedinformation for RMON Group 1, 2, 3, and 9 as well as t...
Page 54 - Alarm Group Configuration
54 CenturyStack 8100 Managed Hub Deleting a RMON History GroupTo delete a History Group, enter the index number. Then, select Delete toremove the index item. Modifying a RMON History GroupTo modify an existing index item, enter the existing index number with thenew information for each field. Then, ...
Page 55 - Remote Network Monitoring 55
Remote Network Monitoring 55 threshold until the opposite threshold is crossed. The Hub provides the threshold control function to support the RMONAlarm Group. Up to 16 Alarm Control Entries can be created. The syntaxand semantic checking are performed to verify the value input by the userbefore it ...
Page 56 - Select Add. After selecting Add the newly added index
56 CenturyStack 8100 Managed Hub To configure an Alarm Group: 1. Enter the number in the Alarm Group Index (for Creation) field. 2. Select Add. After selecting Add the newly added index number shifts from the “For Creation” field, to the“For Modification and Deletion” field, and is ready formodifica...
Page 57 - Remote Network Monitoring 57
Remote Network Monitoring 57 Alarm Group Configuration Alarm Group Index• creation Create a new alarm group (number). • modification & deletion Select an existing alarm group to monitor or edit. Variable Category RMON/ rptr group/ rptr port Alarm Index The current alarm group index number Alarm ...
Page 59 - Remote Network Monitoring 59
Remote Network Monitoring 59 EtherStats CRC Align Errors: The total number of packetsreceived that had a length (excluding framing bits, but includingFCS octets) between 64 and 1518 octets, but had either a badFrame Check Sequence (FCS) with an integral number of octets(FCS Error) or a bad FCS with ...
Page 67 - Remote Network Monitoring 67
Remote Network Monitoring 67 History Information History Control Data Source 10M segment/100M segment History Control Owner Name assigned as the Owner. History Control Bucket Request Number of sample buckets requested History Control Bucket Granted Number of sample buckets that were granted History ...
Page 69 - Remote Network Monitoring 69
Remote Network Monitoring 69 Event Log Event Index Valid index items configured in the RMON EventConfiguration Menu Log Index Number of the event log Event Description Description of the event Event Type No Change/Event None/Log/Trap/Log & Trap Event Community Name of the event community Event O...
Page 71 - Additional Information 71; Chapter 6; Additional Information; Agency Compliance
Additional Information 71 Chapter 6 Additional Information Agency Compliance Product Safety and Compliance Statements:This equipment complies with the following requirements: • UL • CSA • EN60950 (safety) • FCC Part 15, Class A • EN55022 Class A (emissions) • EN50082-1 (immunity) This product shall ...
Page 72 - Warranty and Servicing Information
72 CenturyStack 8100 Managed Hub Standards Compliance • IEEE 802.3 10BASE-T, 10BASE-5 Ethernet • IEEE 802.3u 100BASE-TX Ethernet • RFC 1213 MIB IIRFC 1516 Repeater MIBProprietary MIBs • RFC 1757 RMON Group 1, 2, 3 and 9 • In-Band and Out-of-Band Management • VT-100 Terminal Interface support Warrant...
Page 73 - Additional Information 73
