Metra TE-50VS - User Manual

Metra TE-50VS Receiver – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

Loading the manual

TE-50VS

Product Manual

TE-50VS

Product Manual

TE-35VS

Product Manual

TE-35VS

Product Manual

800.221.0932

iBeamUSA.com

460 Walker Street, Holly Hill, FL 32117

800.221.0932

iBeamUSA.com

460 Walker Street, Holly Hill, FL 32117

800.221.0932

iBeamUSA.com

460 Walker Street, Holly Hill, FL 32117

800.221.0932

iBeamUSA.com

460 Walker Street, Holly Hill, FL 32117

II. Installation

1) 5” color video screen that can mount on the window (with supplied suction

cup mount) or dash (with supplied mounting base with 3M tape)

2) Connect the RED wire to the +12 volt accessory wire
3) Connect the BLACK wire to ground (a metal, non-painted surface)
4) Plug video cable from any source with a composite video output into

either of the video inputs of the video screen. The video screen will
automatically turn on when it detects a video source and it turn off when
that video source stops.

5) To adjust settings such as color, contrast, brightness, language and screen

ratio use the middle button on the back to scroll through settings and use
the top and bottom buttons to select.

NOTE:

If the video screen is used with a backup camera use AV2 input (this

will allow for automatic triggering when vehicle is placed in reverse and will
override the AV1 input) the video screen has a built in shade on top, this is
how the screen should be mounted.

II. Installation

1) 5” color video screen that can mount on the window (with supplied suction

cup mount) or dash (with supplied mounting base with 3M tape)

2) Connect the RED wire to the +12 volt accessory wire
3) Connect the BLACK wire to ground (a metal, non-painted surface)
4) Plug video cable from any source with a composite video output into

either of the video inputs of the video screen. The video screen will
automatically turn on when it detects a video source and it turn off when
that video source stops.

5) To adjust settings such as color, contrast, brightness, language and screen

ratio use the middle button on the back to scroll through settings and use
the top and bottom buttons to select.

NOTE:

If the video screen is used with a backup camera use AV2 input (this

will allow for automatic triggering when vehicle is placed in reverse and will
override the AV1 input) the video screen has a built in shade on top, this is
how the screen should be mounted.

II. Installation

1) The TE-35VS is a 3.5 inch color video screen that can mount on the

window (with supplied suction cup mount) or dash (with supplied
mounting base with 3M tape)

2) Connect the RED wire to the +12 volt accessory wire
3) Connect the BLACK wire to ground (a metal, non-painted surface).
4) Plug the power cable into the USB/video cable then plug the mini USB

cable into the back of the video screen to power the device.

5) Plug video cable from any source with a composite video output into either

of the video inputs of the video screen. The video screen will automatically
turn on when it detects a video source and it turn off when that video
source stops.

6) To adjust settings such as color, contrast, brightness, language and screen

ratio use the middle button on the front to scroll through settings and use
the left and right buttons to select.