Page 3 - FEATURES AND FUNCTIONS
Key Charts Use SET for all programming sequences. The LED (red light) blinks to show that the remote control is working and is sending signals. Use M.POWER to set up and turn on (or off ) all TV, VCR, and DVD components with a single key. Also see page 25. Press POWER once to turn on (or off ) a sel...
Page 5 - PROGRAMMING TV CONTROL
Ampro 0751 Anam 0180Audiovox 0451, 0180, 0092, 0623 Baysonic 0180 Belcor 0019 Bell & Howell 0154 Bradford 0180 Brockwood 0019 Broksonic 0236, 0463 CXC 0180 Candle 0030, 0056 Carnivale 0030 Carver 0054 Celebrity 0000 Cineral 0451, 0092 Citizen 0060, 0030, 0056, 0039, 0092 Concerto 0056 Contec 018...
Page 7 - PROGRAMMING VCR CONTROL; Setup Codes for VCRs:
13 PROGRAMMING VCR CONTROL NOTE: If you own a TV/VCR combination, skip this section andperform “Programming TV/VCR Combo Control” on page 16. Locate the brand name of your VCR in the Setup Codes For VCRs section below, and write it in the following space. VCR Brand: _________________________________...
Page 9 - PROGRAMMING TV/VCR COMBO CONTROL
6. Write your TV/VCR Combo code in the boxesbelow for future reference. NOTE: Remember, to use the One For All 4-Device Video ExpertPlus With Learning to operate your TV/VCR Combo, press VCR first. Setup Codes for TV/VCR Combos: Brocksonic 0002, 0479 (TV:0463) Citizen 0278 Colt 0072 Curtis Mathes 00...
Page 10 - SET; Setup Codes for Cable Converters:
Archer 0153, 0022, 0797 Belcor 0056 Bell & Howell 0014 Bell South 0899 Cable Star 0056 Cabletenna 0022 Cableview 0022 Century 0153 Citizen 0153, 0315 Colour Voice 0025 Comtronics 0040Contec 0019 Digi 0637 Eastern 0002Emerson 0797 Everquest 0015, 0040 Focus 0400 GC Electronics 0056 Garrard 0153 G...
Page 11 - PROGRAMMING DVD PLAYER CONTROL; DVD; Setup Codes for Satellite Receivers:
PROGRAMMING DVD PLAYER CONTROL Locate the brand name of your DVD (or LD) player in the Setup Codes For DVDs ( or LDs) section on the next page, and write it in the following space. DVD (or LD) Brand: __________________________ The brands are listed in alphabetical order with the mostpopular codes li...
Page 12 - SEARCHING FOR YOUR CODE; Setup Codes for DVD Players:
23 SEARCHING FOR YOUR CODE If your video component does not respond to the One ForAll 4-Device Video Expert Plus With Learning remotecontrol after trying all of the codes listed for your brand,or if your brand is not listed at all, try searching for yourcode. For example, to search for a code for yo...
Page 13 - CHECKING THE CODES
25 24 PROGRAMMING THE MASTER POWER KEYFOR ALL ON/OFF With the One For All 4-Device Video Expert Plus With Learning, you can program the M. POWER key to turn your TV, VCR, DVD (or LD), and Cable (or Satellite)components on and off with the press of one button. 1. On the remote control, press and hold...
Page 14 - CHANGING VOLUME LOCK; To change Volume Lock to the CBL/SAT mode:; RE-ASSIGNING DEVICE KEYS; Perform Key Sequence
27 26 CHANGING VOLUME LOCK The One For All 4-Device Video Expert Plus WithLearning remote control is preset to control the volumeof a component through your TV. If your TV is not remote controllable, or if you would likethe volume to be controlled by a different component, youcan change the Volume L...
Page 15 - USING KEYMOVER; To change Volume Lock back to the TV mode:; USING THE MENU KEY
29 28 USING KEYMOVER The One For All 4-Device Video Expert Plus WithLearning remote control includes a Keymover feature that allows you to map (or copy) keys from one mode (i.e.,source mode)to another (i,e, destination mode). NOTE: The following keys cannot be mapped: TV , DVD , VCR , CBL/SAT , SET ...
Page 16 - Deleting Functions From The L Keys:; USING LEARNING KEYS; Programming The L Keys
9. To test a new feature, press the componentkey (e.g., TV ) that was learned once. Then press the L key (e.g., L1 ) where the com- ponent’s feature was learned. Deleting Functions From The L Keys: 1. On the remote control, press and hold SET until the LED blinks twice, then release SET . 2. Enter 9...
Page 17 - USING THE VIDEO CONFIGURATION MODE; An Example Video Configuration
33 32 USING THE VIDEO CONFIGURATION MODE The One For All 4-Device Video Expert Plus WithLearning remote control includes a powerful Video Configuration feature that allows you to combine the most used functions of your Audio/Video equipment into one V.CONFIG mode. The features you can combine are or...
Page 18 - An Example Video Configuration (Continued); TROUBLESHOOTING
35 USING THE VIDEO CONFIGURATION MODE An Example Video Configuration (Continued) 5. Press TV once and then press VOL+ . The LED will blink twice. 6. Press CBL/SAT once and then press CH+ . The LED will blink twice. 7. Press CBL/SAT once and then press MENU . The LED will blink twice. 8. Press TV onc...
Page 19 - ADDITIONAL INFORMATION
ADDITIONAL INFORMATION The One For All 4-Device Video Expert Plus WithLearning remote control does not have any user-service-able parts. Opening the case, except for the battery cover,may cause permanent damage to your remote control. ©2000 by Universal Electronics Inc. No part of this publi-cation ...