Page 2 - CAUTION
2 WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interf...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
3 IMPORTANT SAFETY INSTRUCTIONS ● Read these instructions. ● Keep these instructions. ● Heed all warnings. ● Follow all instructions. ● Do not use this apparatus near water. ● Clean only with dry cloth. ● Do not block any ventilation openings. Install in accordance with the manufacturers instruction...
Page 4 - Contents; Turning on or off the TV SET-UP BOX
4 Contents INTRODUCTION ......................................................................6 T ECHNICAL OVERVIEW .............................................................6 What are Analog TV, Digital TV, NTSC, ATSC, SDTV, and HDTV?.................................................................
Page 6 - Introduction; Technical overview; Analog TV
6 Introduction To ensure proper use of this product, please read this owner’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your TV S E T - U P B O X . This chapter explains the Technical overview, unpacking, front panel, Rear ...
Page 8 - Resolution an interlacing; of a second containing; Input formats; It will then do the appropriate
8 Resolution an interlacing Two of the elements that determine the quality of a TV picture are resolution and interlacing. Resolution: For TV equipment and broadcasts, resolution is defined by the number of horizontal lines displayed to make up each frame of a video image. The more lines of resoluti...
Page 10 - Unpacking; Remote Control
10 Unpacking Make sure you have received all these items listed below with the TV SET-UP box. Remote Control l a u n a M s ’ r e n w O e l b a C F R TV SET-UP BOX
Page 11 - REMOTE CONTROL SENSOR
11 4 2 3 1 2 3 4 5 Front Panel Rear Panel 2. REMOTE CONTROL SENSOR 3. INDICATION LIGHT 4. -Choose the channel upward. 5. - Choose the channel downward. 1. STANDBY -Turn DTV Tuner on and off. 1. RF OUT - Connect to TV’s antenna. 2. RF IN - Antenna connects to this jack. 3.CH3 .CH4- 4. AUDIO -Connect ...
Page 12 - Remote control
12 1 2 45 6 16 7 8 11 12 13 15 3 9 10 14 Remote control 1. STANDBY Turn TV SE T- U P B O X on and off. 2. NUMBER Push to change channel. 3. BACK Move to the previous channel. 4. ASPECT Change Screen Size. 5. Direction & OK Move highlight to items in whatever direction needed, and confirm the sel...
Page 13 - Loading Battery
13 Loading Battery O P E N O P E N 1.Open the cover 2.Install batteries 3.Close the cover 1.1.1 Installing the Batteries Remove the battery cover from the remote control and put 2xAA size batteries inside the compartment.The diagram inside the battery compartment shows the correct way to install the...
Page 14 - Connections and Setup; This chapter tells you everything you; Connections; Connecting to antenna
14 Antenna Connections and Setup This chapter tells you everything you need to know start setting up and using your converter box. It includes information on Connections and Initial Settings. Connections This paragraph tells you connecting the converter box, and connects to TV, Display, the home the...
Page 15 - Connecting to TV; If the TV does not have AUDIO/VIDEO input
15 Connecting to TV 1. Connect antenna cable to AIR/CABLE jack of DTV Tuner unit. Refer to previous section “Antenna /RF Connections”. 2. Connect video cable from VIDEO jack to the TV video (CVBS) input. 3. 4. Connect audio cable from R-AUDIO-L jacks to the TV stereo (L/R) audio inputs. Optional: If...
Page 16 - Initial Settings; Power
16 Initial Settings After you finish connecting your converter box, you need to run initial setup, which automatically sets up available channels. The initial setup appears when you turn on your converter box for the first time. If you do not want to set up the channels at this time, you can do it l...
Page 17 - Press the; OK; button to finish the Channel scan.
17 6. TV SET-UP BOX auto scans channels. 7. Press the OK button to finish the Channel scan. 8. Change Channel by pushing CH+ / CH- button or number keys on the Remote Control. ) z The channel number is shown up in the top-left corner of the screen. z Check the Antenna and Power Cable Connection if t...
Page 18 - Operation; Watching TV
18 Operation This chapter covers all of the things you can do with the Guides and other features that let you control the way you use converter box. It includes watching TV and using menu. Watching TV This paragraph explains simple operations for watching a TV program. It includes: Turning on or o...
Page 19 - TV
19 Turning on or off the Preparation Perform the following steps before you turning on the 1. Insert the batteries into the remote control unit. (See page 13.) 2. Connect the antenna/cable signal to (See page 14) . 3. Plug in the AC cord to the AC outlet. Turning on the power 1. Press the STANDBY bu...
Page 20 - Changing the channels
20 Changing the channels You can change channels in several ways. Method 1 Press CH+/CH- button on the remote control or the front panel to change the channels. Method 2 Using remote control buttons 0 - 9 , and · (DOT) to select a channel program. e.g., channel 8: Press 8 → OK e.g., channel 15.1: Pr...
Page 21 - MUTE; Mute
21 Adjusting the volume You can adjust the volume on the remote control. To increase the volume, press VOL+ . To decrease the volume, press VOL- . ) z If the audio was muted, pressing VOL+ or VOL- will un-mute the audio and display the volume banner without changing the volume. The next press will i...
Page 23 - Displaying the GUIDE; GUIDE
23 Sun Jan 18 12:00AM Displaying the GUIDE Show program information for the current channel. 1. Press GUIDE button on the remote control once, the information will appear. Date and clock; Channel number; Channel label (if preset) Broadcast program name Program name 2. Press GUIDE button ag...
Page 24 - Audio Preference; AUDIO
24 Audio Preference The digital-TV transmission system is capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of the program into foreign languages). The availability of these additional “multi-tracks” depends upon the program. 1. You can select the audi...
Page 25 - Using the MENU
25 Set up Language…………….……….Page26 Aspect ratio………………......Page26 Audio……..….……….……….Page27 Time Zone….…..……..….......Page27 DST (Daylight Saving Time) …...page27 Reset All……………………..page27 System Information..…..…….Page27 Caption CC Mode……..…….…….......Page30 Basic CC……………………...Page31 Advanced CC….....
Page 27 - button on the remote; Time Zone; Chipset
27 Audio You can select an audio preference from English, French and Spanish. ) z If you want to temporary changing audio service at a channel, you can use AUDIO button on the remote control. (See page 24) Time Zone You can select a time zone from Alaska/ Hawaii/ Pacific/ Mountain/ Central/ Eastern/...
Page 28 - Channels
28 Channels 1. Highlight “Channels” on the MENU control panel and press OK or ▼ . 2. Press ▲ / ▼ to highlight the item: Tuner, Auto Scan, Manual Scan, Master List, Favorites1, Favorites2, Favorites3. 3. Press OK or ► to select an option. 4. Press EXIT to exit. Auto Scan If you select the “Start Scan...
Page 30 - Caption
30 Caption Closed Caption feature is to display On Screen Text Messages during watching TV. This feature is available in both analog and digital broadcast. The converter box is equipped with an internal Closed Caption decoder. It allows you to view conversations, narration and sound effects as subti...
Page 32 - Color; Background
32 Advanced CC Style This will adjust advanced settings such as text style and size and etc. It can be used into digital channel. Text Style Typewriter/Storybook/ Computer/Modern/ Formal/ Cursive/Casual/ As Broadcast Color White/Red/Green/Blue/Black/Yellow/ Magenta/Cyan/ As Broadcast Size Small/ Sta...
Page 38 - Reference; Troubleshooting
38 Reference Troubleshooting No power Is the AC power cord plugged in? No signal Check your antenna input or location. Check your cable input. Check your RF connection or set up. No picture Make sure that the right video type is selected. Make sure the Initial Setup process has been perf...
Page 39 - Specification
39 Specification Contents Spec. Broadcasting standard DTV(Terrestrial ATSC A/74 Protocol) Turning system type VHF2~13, UHF14~69 (Antenna 2~69channel) Video System ATSC Decoder Auto Channel Search Supported Aspect Ratio Letter box/Full / Cut out C S T A h ti w ) e d i u G m a r g o r P c i n o rt c e...
