Page 2 - CONTENTS
Contents ......................................................................1 Important Safety Instructions ...................................2 Power Source .............................................................5 Location of Controls ..................................................5 • F...
Page 3 - IMPORTANT SAFETY INSTRUCTIONS
2 IMPORTANT SAFETY INSTRUCTIONS ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISES ET POUSSER JUSQU’AU FOND.
Page 4 - CAUTION; RISK OF ELECTRIC SHOCK
3 IMPORTANT SAFETY INSTRUCTIONS (CONTINUED) Before using the unit, be sure to read all operating instructions carefully. Please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1. READ ...
Page 5 - IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)
4 15. OVERLOADING Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 16. OBJECT AND LIQUID ENTRY Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short out parts that could result in ...
Page 6 - light green; FRONT
5 POWER SOURCE LOCATION OF CONTROLS 1. Audio 1 IN/Video 1 IN/Headphone Jacks (Side of Unit) 2. MENU Button3. TV/AV Button4. VOLUME Down Button5. VOLUME Up Button6. CHANNEL Down Button 7. CHANNEL Up Button8. Display9. Remote Sensor 10. Power Indicator–Standby light red, Power On light green 11. Power...
Page 7 - When setting the TV Menus, the Channel
6 LOCATION OF CONTROLS (CONTINUED) 3 4 5 2 6 1 1. Video OUT Jack 2. Audio OUT Jacks 3. S-Video IN Jack 4. Video 2 IN Jack 5. Audio 2 IN Jacks 6. Antenna Jack REAR 1. MENU Button 2. VOLUME Up/Down Buttons 3. RECALL Button 4. TV/AV Button 5. P. STD (Picture) Button 6. Power Button 7. CHANNEL Up/Down B...
Page 8 - REMOTE CONTROL; BATTERY INSTALLATION; BATTERY PRECAUTIONS
7 REMOTE CONTROL BATTERY INSTALLATION EFFECTIVE DISTANCE OF THE REMOTE CONTROL TRANSMITTER NOTES: • When there is an obstacle between the TV and the transmitter, the transmitter may not operate. • When direct sunlight, an incandescent lamp, fluorescent lamp or any other strong light shines on the Re...
Page 9 - ANTENNA CONNECTIONS; Antenna (Single 75 ohm cable; OR; CONNECTION USING THE SIDE AUDIO/VIDEO IN JACKS; Are the cables included?
8 ANTENNA CONNECTIONS OUTDOOR VHF/UHF ANTENNA CONNECTION (ANTENNA NOT INCLUDED) Follow the instructions for the type of antenna system you intend to use. If using Cable or satellite, see the next page. Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire) Separate VHF/UHF Anten...
Page 10 - FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE; connect the CATV 75 ohm coaxial cable to the VHF/UHF jack on the; FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE OR SATELLITE; converter/descrambler or satellite box to select channels.; INCOMING; DESCRAMBLER OR; I connected my cable, but why can’t I get channels above 69?
9 CABLE (CATV)/SATELLITE CONNECTIONS This TV has an extended tuning range and can tune most cable channels without using a Cable TV converter box. Some Cable TV companies offer “premium pay channels” in which the signal is scrambled. Descrambling these signals for normal viewing requires the use of ...
Page 11 - CONNECTION FROM AN EXTERNAL UNIT; CONNECTION USING COAXIAL CABLE:; Connect the VCR/DVD’s Video OUT jack to the TV’s VIDEO 2 IN jack.; VCR
10 CONNECTION FROM AN EXTERNAL UNIT CONNECTION USING COAXIAL CABLE: Follow the instructions below to connect an external unit, such as a VCR, to your unit using a 75 ohm coaxial cable. (CABLES NOT INCLUDED.) 1. Connect the cable, satellite or incoming antenna to the VHF/UHF IN jack on the rear of th...
Page 12 - CONNECTION USING THE AUDIO/VIDEO OUT JACKS:
11 CONNECTION FROM AN EXTERNAL UNIT (CONTINUED) CONNECTION TO AN EXTERNAL UNIT CONNECTION USING S-VIDEO CABLE: Follow the instructions below to connect an S-VIDEO VCR/DVD to your television using an S-video cable. (CABLES NOT INCLUDED.) 1. For VCR, connect the cable, satellite or incoming antenna to...
Page 13 - SETTING THE MENUS; • To exit the menus, press the EXIT button.; SETTING THE PICTURE
12 SETTING THE MENUS Press the CHANNEL Up 1 or Down 2 button until COLOR TEMP is selected. Hue 3 1 2 Press the CHANNEL Up 1 or Down 2 button until VOLUME is selected; volume will be highlighted in red. Press the VOLUME Up 3 or Down 4 button to set the desired volume. PICTUREBRIGHT 50 CONTRAST 34 COL...
Page 14 - SETTING THE CLOCK
13 SETTING THE MENUS (CONTINUED) Press the VOLUME Up 1 or Down 2 button to set the current hour, then press the CHANNEL Down button 3 ; the minutes will be highlighted in red. Clock 01 01:13 Time-On - - : - - Ch. Select 1 Time-Off - - : - - Sleep Time 0 Remind Time - - : - - Ch. Switch 1 Timer Clock...
Page 15 - SETTING THE ON TIMER
14 SETTING THE MENUS (CONTINUED) Press the VOLUME Up 1 or Down 2 button to set the desired On hour, then press the CHANNEL Down button 3 ; the minutes will be highlighted in red. Clock 01 01:13 Time-On - - : - - Ch. Select 1 Time-Off - - : - - Sleep Time 0 Remind Time - - : - - Ch. Switch 1 T Clock ...
Page 16 - SETTING THE OFF TIMER
15 SETTING THE MENUS (CONTINUED) Press the VOLUME Up 1 or Down 2 button to set the desired Off hour, then press the CHANNEL Down button 3 ; the minutes will be highlighted in red. Ch. Select 5 Time-Off - - : - - Sleep Time 0 Remind Time - - : - - Ch. Switch 1 T Clock 01:13 Time-On 12 : 30 Ch. Select...
Page 17 - SETTING THE REMIND TIMER
16 SETTING THE MENUS (CONTINUED) Press the VOLUME Up 1 or Down 2 button to set the desired Remind hour, then press the CHANNEL Down button 3 ; the minutes will be highlighted in red. Ch. Select 5 Time-Off 12 : 45 Sleep Time Sleep Time 10 10 Remind Time - - : - - Ch. Switch 1 T Clock 01:13 Time-On 12...
Page 19 - SETTING THE FADE
18 Press the VOLUME Up 1 or Down 2 button to turn the VNR ON (this will allow the picture tube to warm up and gently turn on, thus increasing the life of the picture tube) or OFF. When done, press the EXIT button 3 to exit the menus. 3 1 2 2 Press the MENU button 1 once; the Video menu will appear. ...
Page 20 - SETTING THE CLOSED CAPTIONS; SETTING THE TV TO DEMO MODE
19 Press the VOLUME Up 1 or Down 2 button to turn Closed Captions off or on and select a mode (see page 31 for details). When done, press the EXIT button 3 to exit the menus. 3 1 2 2 Press the MENU button 1 once; the Video menu will appear. Press the VOLUME Up 2 or Down 3 button to select the Setup ...
Page 21 - SETTING THE CHANNEL SYSTEM
20 SETTING THE MENUS (CONTINUED) Press the VOLUME Up 1 or Down 2 button to set the desired Channel System (AUTO, NTSC or NTSC443). When done, press the EXIT button 3 to exit the menus. NOTE: In the USA, the system is NTSC. 3 1 2 2 Press the MENU button 1 once; the Video menu will appear. Press the V...
Page 22 - How many channels will I actually receive?; SETTING CHANNELS INTO MEMORY
21 SETTING THE MENUS (CONTINUED) This unit is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the unit’s memory. In addition to normal VHF/UH...
Page 23 - ADDING AND DELETING CHANNELS
22 SETTING THE MENUS (CONTINUED) After setting channels into memory, you can add or delete channels as follows: Press the VOLUME Up 1 or Down 2 button to select a desired channel to add or delete. 1 2 2 While in the TV mode, press the MENU button 1 once; the Video menu will appear. Press the VOLUME ...
Page 25 - TV PARENTAL CONTROL; TO CHANGE THE PASSWORD:; PARENTAL CONTROL SET-UP
24 TV PARENTAL CONTROL 5 2 3 1 4 1 2 3 V-Chip enables parents to prevent their children from watching inappropriate material on TV. V-Chip reads the ratings for programming (except for news, sports, unedited movies on premium cable and Emergency System signals), then denies access to programming if ...
Page 28 - LOCK MENU
27 TV PARENTAL CONTROL (CONTINUED) Enter the Parental Lock menu and turn on the V-chip option as described on page 24 (steps 1 and 2). PG B PG-13 B R B NC-17 B X B Parental Lock Off TV Rating MPAA Rating Lock Menu Lock Menu Change Password Parental Lock AV Lock On On Lock 1 Press the CHANNEL Up 1 or...
Page 29 - TV BASIC OPERATION; Why do I only receive 69 channels, when my cable goes much higher?
28 TV BASIC OPERATION Adjust the volume level by pressing the VOLUME Up 1 or Down 2 button. 1 2 3 2 3 1 4 4 Change the Antenna option to select between TV or CATV. Select TV if using VHF/UHF antenna, and select CATV if using Cable TV (see page 21, steps 1 and 2). 2 Press the POWER button 1 on the re...
Page 30 - How do I watch the device connected to the side audio/video jacks?
29 TV BASIC OPERATION (CONTINUED) MUTE Press the Mute button ❶ to turn off the sound; the TV’s sound will be silenced and “Mute” will appear on the screen. The sound can be turned back on by pressing this button again or one of the VOLUME Up 2 or Down 3 buttons; “Mute” will disappear form the screen...
Page 31 - VOLUME Buttons
30 TV BASIC OPERATION (CONTINUED) TV/AV Press to select TV (CATV), VIDEO 1 (Side jacks), VIDEO 2 (Rear jacks) or SVHS (S-Video jack). 1 P.STD (Picture Standard) Press to select between the picture modes (Standard, Vivid, Personal, Listen {select just to listen, not to watch}, or Movie). 1 MTS/SAP P ...
Page 32 - CLOSED CAPTIONS; WHAT IS CLOSED CAPTIONING?; I entered the Captions mode, but no captions are appearing, why?
31 CLOSED CAPTIONS WHAT IS CLOSED CAPTIONING? This television has the capability to decode and display Closed Captioned television programs. Closed Captioning will display text on the screen for hearing-impaired viewers or it will translate and display text in another language. CLOSED CAPTIONING WIT...
Page 33 - TROUBLESHOOTING GUIDE
32 TROUBLESHOOTING GUIDE SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION POWER No power. The AC power cord is not Connect the AC power cord to connected. the AC outlet. TV BROADCAST RECEPTION TV station experiencing problems. Try another channel. Poor or no picture. Picture control is not adjusted. Check p...
Page 34 - lamps, electric drills and other electric appliances.; RADIO FREQUENCY INTERFERENCE:; cases, causes loss of contrast in the picture.; PICTURE SIZE VARIATION:; CONTRAST or BRIGHT setting.
33 RECEPTION DISTURBANCES CARE AND MAINTENANCE To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning. The finish on the unit may be cleaned with a dust cloth and cared for as other furniture. Use caution when cleaning and wiping the plastic parts. Mild soap and...
Page 35 - SPECIFICATIONS; WWW.MEMOREXELECTRONICS.COM OR CONTACT CUSTOMER SERVICE AT
TELEVISION Picture Tube ...............................................................................................20” (Measured Diagonally) Antenna Input Impedance..........................................................................VHF/UHF, 75 Ohm Coaxial Input RCA Video .....................
