Memorex MMG-CR3810 - Manual

Page 2 - SAFETY PRECAUTIONS; TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE; CAUTION; RISK OF ELECTRIC SHOCK; This unit employs a laser. Only qualified service personnel

1 SAFETY PRECAUTIONS CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE C OVER (OR BAC K) . N O U S E R -S E R V I C E A B LE P A R TS I N S I D E . R E FE RSERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, withi...

Page 3 - IMPORTANT SAFETY INSTRUCTIONS; receiver is connected.

Before using the unit, be sure to read all operatinginstructions carefully. Please note that these aregeneral precautions and may not pertain to yourunit. For example, this unit may not have thecapability to be connected to an outdoor antenna. 1. READ INSTRUCTIONS All the safety and operating instru...

Page 4 - IMPORTANT SAFETY INSTRUCTIONS (CONTINUED)

10. POWER SOURCES This product should be operated only from thetype of power source indicated on the markinglabel. If you are not sure of the type of powersupply to your home, consult your appliancedealer or local power company. For productsintended to operate from battery power, or othersources, re...

Page 5 - EIA

Dear Customer: Selecting fine audio equipment such as the unit you’ve just purchased is only the start of yourmusical enjoyment. Now it’s time to consider how you can maximize the fun and excitementyour equipment offers. This manufacturer and the Electronic Industries Association’sConsumer Electroni...

Page 7 - BATTERY PRECAUTIONS; BATTERY INSTALLATION

6 LOCATION OF CONTROLS (CONTINUED) BATTERY INSTALLATION The remote control transmitter is designed to operatewith two (2) “AAA” size batteries (not included). To installthe batteries, slide the battery compartment cover openon the back of the remote control and insert two (2)“AAA” size batteries obs...

Page 8 - MOUNTING; Figure 1

This under the cabinet CD clock radio has been designed to be installedunderneath a wooden cabinet by using the Mounting Template, four (4) Screws,four (4) Washers and four (4) Spacers (see Figure 1). MOUNTING THE UNIT Locate a desired space for the CD clock radio (it is recommended to mount theunit...

Page 9 - IF YOUR CABINET HAS AN OVERHANG:; If the cabinet has glue; Figure 3; Figure 4

3b. IF YOUR CABINET HAS AN OVERHANG: Measure the thickness ofthe overhang (see Figure3). Fold the front of thetemplate down along theprinted guideline that isclosest to the thickness ofyour cabinet. Tape thefolded portion to thebackside of the overhang,then tape the templateunderneath the cabinet (s...

Page 10 - or or; Figure 6

7. Insert screws from theINSIDE of the cabinet. Thewashers must be used onmetal cabinets and woodcabinets if the drilled holeswere not countersunk.Position the washers, flat-side down, and insert thescrews into the holes. 8. If your cabinet does nothave an overhang, skipthis step.If your cabinet has...

Page 11 - OPERATION; TO SET OR RESET THE ACTUAL TIME; IMPORTANT NOTE ON THE COUNTDOWN TIMER:

10 OPERATION TO SET OR RESET THE ACTUAL TIME Press and hold the TIMER button ❶ ; the display will show “00:00” and theh o u r d i g i t s w i l l b l i n k . U s e t h eSKIP/TUNING / buttons ❷ to s e l e c t t h e a m o u n t o f h o u r s i n t h ecountdown. 2 2 1 1 Press the TIMER button ❶ again a...

Page 12 - TO START THE COUNTDOWN TIMER

11 OPERATION (CONTINUED) TO START THE COUNTDOWN TIMER Once the countdown time has beenentered (see previous page), pressthe TIMER button and the display wills t a r t c o u n t i n g d o w n t h e p r e s e tcountdown time. 1 When the countdown timer reaches“00:00:oo”, the unit will beep. Pressthe T...

Page 15 - TO PAUSE PLAYBACK; TO PLAY A CD; skip; Do I need an adapter to play 3” singles?

14 OPERATION (CONTINUED) I n s e r t a C D a s d e s c r i b e d o n t h ep r e v i o u s p a g e . P r e s s t h e P O W E Rbutton ❶ to turn the unit on and press the CD button ❷ . The total playing time and number of tracks will appearin the display. 2 1 1 Press the PLAY/PAUSE ( ) button to start ...

Page 17 - TO RANDOMLY PLAY BACK TRACKS ON A CD; Programming continued on the next page.

16 OPERATION (CONTINUED) Press the POWER button ❶ to turn the unit on and press the CD button ❷ . Press the MEMORY DOWN/RANDOMbutton ❸ ; “RANDOM” will appear in the display. 3 2 1 1 Press the PLAY/PAUSE ( ) button ❶ to begin playback. The unit will play all the tracks in random order. Adjustthe volu...

Page 18 - Can I program a track more than once?

17 OPERATION (CONTINUED) Press the PLAY/PAUSE ( ) button to begin playback. The unit will play allt h e t r a c k s i n t h e o r d e r y o uprogrammed them. 3 Adjust the volume using the VOLUME+/– buttons ❶ as desired. When the disc is through playing, it will stop.Press the STOP ( ■ ) button ❷ to ...

Page 19 - CARE AND MAINTENANCE; Caring for Compact Discs

18 CARE AND MAINTENANCE Caring for Compact Discs • Treat the disc carefully. Handle the compact disc only by its edges. Never allow your fi ngers to come in contact with the shiny, unprinted side of the disc. • Do not attach adhesive tape, stickers, etc. to the compact disc label. • Clean the compac...

Page 20 - TROUBLESHOOTING GUIDE; SYMPTOM

19 TROUBLESHOOTING GUIDE SYMPTOM CAUSE SOLUTION Unit will not AC cord not Check AC cord turn on. connected. connection. Disc will not play. CD compartment Close CD compartment not closed. door. Disc inserted Reinsert disc correctly. incorrectly.Dirty or defective disc. Try another disc.Moisture Wipe...

Page 21 - Printed in Hong Kong

Memcorp, Inc. Weston, Fl Printed in Hong Kong Visit our website at www.memcorpinc.com MMG-CR3810.OM.QXD 7/15/02 7:09 AM Page 20

Memorex MMG-CR3810 - Manual

Table of Contents:

Summary

Other Memorex Models