Memorex E-IDE - Manual

Memorex E-IDE

Memorex E-IDE – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
21 Page 21
22 Page 22
23 Page 23
24 Page 24
25 Page 25
26 Page 26
27 Page 27
Page: / 27

Table of Contents:

  • Page 3 – Table of Contents; HARDWARE INSTALLATION; PHYSICAL INSTALLATION OF YOUR NEW DVD RECORDER
  • Page 5 – Set up the DVD drive; Install the DVD writing software; STEP; Start using the drive!; STEP; Slave; DIGITAL/ANALOG AUDIO OUT
  • Page 6 – power switch to the OFF position. Unplug the power cord as well.; SLAVE; - Change the jumper to the SLAVE position if:; MASTER; - Leave the jumper switch on the MASTER position if:
  • Page 8 – If so, you may skip to; Color Mark; Top; tight and has not become loose during installation.
  • Page 9 – OPERATING YOUR NEW DRIVE; This indicator displays the drive status.
  • Page 10 – mechanism ejects the disc.; Systems; For additional troubleshooting, referred to section 8 on page 42; A straightened paper clip makes an ideal tool.
  • Page 11 – CREATING CDS AND DVDS; Insert the Memorex
  • Page 16 – Select the desired option or close; Nero Express 6
  • Page 17 – and return to the; to advance to the burning window.; Current Recorder; Select the speed for the burning process.; Number of copies; Select the number of copies to be burned.
  • Page 18 – starts automatically and the selection window for video
  • Page 21 – Select the desired option or close Nero Express 6.; ) Where can I find step by step directions for using, Nero Express 6,; ) Where can I get assistance with technical problems?
  • Page 22 – The disc tray does not open when you press the eject button.
  • Page 24 – Buffer underrun protection is featured in this drive.
  • Page 25 – CAUTION; and be damaged or cause personal injury.; SAFETY PRECAUTIONS; PLEASE READ CAREFULLY BEFORE PROCEEDING; you risk damage or loss of your vision.
  • Page 26 – that can cause discs to come apart in high speed drives.; Precautions for Transportation; without prior notice.
Loading the manual

I N T E R N A L

E - I D E

GUIDE & SOFTWARE MANUAL

DVD RECORDER

For DVD+ & DVD- Recording

FORMAT

dual

D O U B L E

L AY E R

16

DVD-ROM

read speed

x

DVD+RW/-RW

re-write speed

4

x

8

DVD-R

write speed

x

DVD+R

write speed

CD-R

write speed

x

48

CD-RW

re-write speed

x

24

CD-ROM

read speed

x

48

DVD+R

write speed

16

x

2.4

x

DOUBLE-LAYER

Supports Windows® 98SE/Me/2000/XP

/

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - Table of Contents; HARDWARE INSTALLATION; PHYSICAL INSTALLATION OF YOUR NEW DVD RECORDER

Table of Contents 1. INTRODUCTION 6 1.1. Congratulation 1.2. About your new Memorex DVD Recorder 1.3. About Double-Layer Recording 1.4. Tools Required for Installation 2. HARDWARE INSTALLATION 8 2.1. Setup Flowchart 2.2. About the ATAPI/E-IDE Interface 3. PHYSICAL INSTALLATION OF YOUR NEW DVD RECORD...

Page 5 - Set up the DVD drive; Install the DVD writing software; STEP; Start using the drive!; STEP; Slave; DIGITAL/ANALOG AUDIO OUT

9 2.2.1. Rear panel The drive’s rear panel features the following: 2.2.2. Setting the Jumper to Select MASTER, SLAVE or CSEL settings Your new drive setting is configured as MASTER by default. Most users will connect their new DVD Recorder to the secondary E-IDE controller of their computer in which...

Page 6 - power switch to the OFF position. Unplug the power cord as well.; SLAVE; - Change the jumper to the SLAVE position if:; MASTER; - Leave the jumper switch on the MASTER position if:

Use narrow pliers to set the plastic jumper at the jumperswitch on the rear panel. Installing your new Memorex DVD Recorder is quite simple. Please follow the instructionson the next page patiently, step-by-step. 1. Before attempting to install your DVD Recorder, turn off your computer by flipping t...

Other Memorex Models