Memorex 53958662 - Manual
Memorex 53958662 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Windows; a. Turn on your computer and wait for the Windows desktop to appear.
- Page 3 – Step 2 – Using Your FlashDrive:
- Page 4 – Using the Write Protection Switch
capture.
share.
Quick Start Guide
Thank you for purchasing a Memorex USB Flash Drive. Your Flash
Drive is a multi-purpose and universally compatible Portable Storage
Device.
GETTING STARTED:
Step 1 – Check your Operating System (OS):
• For Windows
®
Me, Windows
®
2000, and Windows
®
XP
There is no need to install any drivers! Go straight to Step 2- “Using
Your Flash Drive.”
• For Windows
®
98SE
(internet access required)
You need to install a USB 2.0 driver for the computer to recognize
the Flash Drive. See “Windows® 98SE Users” below.
• For Windows
®
NT—NT does not support USB. The Flash Drive is
not supported in this OS.
• For Windows 98
®
or older – Windows
®
operating systems prior to
Windows
®
98SE do not have adequate USB support, and the
Flash Drive is therefore not supported for use by those operating
systems.
• For Apple Macintosh Mac OS 8.6 or higher
(8.6 - 9.x USB 1.1 support only)
There is no need to install any drivers! Go straight to Step 2.
USB Flash Drive
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Windows ® 98SE Users: (Internet access required @ www.memorex.com) Note: Do not insert your USB Flash Drive into your USB port until you have successfully completed steps a. through f. below. a. Turn on your computer and wait for the Windows desktop to appear. b. Close any applications you may have ...
Step 2 – Using Your FlashDrive: Your new Memorex USB Flash Drive is ready to use now. Follow the simple steps below to begin using your new portable storage device: a. Remove the protective snap-on cap and insert your new Flash Drive into an available USB port on your computer. Note: You may be requ...
Important Note: Do not remove the USB Flash Drive while the LED is flashing! Interrupting the data flow while the LED is flashing can potentially corrupt existing data that is being transferred as well as other data stored on the drive. You may also potentially lose access to your drive and your abi...
