Meade ETX-LS - Manual
Meade ETX-LS – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
ETX-LS QUICKSTART GUIDE
STE p
3
STE p
2
Adjust leg height ( make
sure that the top of
the tripod is
approximately level ).
STE p
1
Spread tripod legs .
STE p
9
place eyepiece into
diagonal prism .
STE p
8
Att ach diagonal prism .
STE p
7
Thread eyepiece holder
into rear cell .
STE p
6
R emove rear cell cap .
STE p
5
Center telescope base onto tripod head and fasten three screw
knobs to a firm feel .
STE p
4
Att ach spreader bar and secure with
washer and knob.
R emove knob and washer
from threaded spreader
bar tension rod .
It is best to set up the telescope in twilight
or before sunset the first time you use
the ETX-LS. Take the telescope and tripod
outside. Set the telescope in a large open
area where you can see lots of sky.
Don’t
setup right next to a building or
a wall. Also try to stay away from
large metal objects like a car or
a metal fence.
Make sure the ground is
stable and is approximately level. It is best to
set up the scope away from bright nighttime
lighting. Bright lights will spoil your night
vision and impede your ability to see the sky.
Additionally, it will take the telescope longer
to align itself if there are too many bright
lights around.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
