Meade 60AZ-AR - Manual

Meade 60AZ-AR

Meade 60AZ-AR – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9
10 Page 10
11 Page 11
12 Page 12
13 Page 13
14 Page 14
15 Page 15
16 Page 16
17 Page 17
18 Page 18
19 Page 19
20 Page 20
Page: / 20

Table of Contents:

  • Page 3 – INTRODUCTION; eyepiece
  • Page 4 – FIGURE 1; Figure 1: Polaris 60AZ-AR Altazimuth Refracting Telescope; Accessory Tray Mounting Bolt Hole
  • Page 6 – ATTACH THE RED DOT VIEWFINDER; place tube between; ALIGN THE RED DOT VIEWFINDER
  • Page 7 – Check this alignment at night on a; TO MOVE THE TELESCOPE; Slightly loosen the horizontal lock knob; THE MOST IMPORTANT RULE
  • Page 8 – OBSERVING
  • Page 11 – SOME OBSERVING TIPS
  • Page 13 – SPECIFICATIONS
  • Page 14 – What do the specifications mean?
  • Page 16 – mu
  • Page 20 – Meade Instruments Corporation
Loading the manual

POLARIS INSTRUCTION MANUAL

60mm | 2.4" Altazimuth Refracting Telescope

60AZ-AR

www

.meade.com

Polaris 60 AZ - AR 3/10/06 11:48 AM Page 1

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 3 - INTRODUCTION; eyepiece

1 INTRODUCTION Your telescope is an excellent beginner’sinstrument, and is designed to observeobjects in the sky and also on land. It can beyour personal window on the universe orallows you to intimately study the behavior ofnesting birds on a distant hillside. The telescope is shipped with the foll...

Page 4 - FIGURE 1; Figure 1: Polaris 60AZ-AR Altazimuth Refracting Telescope; Accessory Tray Mounting Bolt Hole

FIGURE 1 Figure 1: Polaris 60AZ-AR Altazimuth Refracting Telescope Inset A: Accessory Tray Mounting Bolt Hole Inset B: Tripod Leg Inset C: Viewfinder Assembly 1. Eyepiece 2. Red dot veiwfinder (see Inset C) 3. Red dot viewfinder alignment screws (see Inset C) 4. Optical tube assembly 5. Vertical loc...

Page 6 - ATTACH THE RED DOT VIEWFINDER; place tube between; ALIGN THE RED DOT VIEWFINDER

Fig. 4 1. Note the two thumbscrews (25) threaded onto two bolts on the optical tube.Remove the thumbscrews from the tube. 2. Line up the two holes on the red dot viewfinder bracket over the two bolts.Slide the bracket over the bolts. See Fig. 1, inset C . 3. Replace the thumbscrews onto the bolts an...

Other Meade Models

All Meade Other