Page 2 - Revision history; Revision
Revision history Copyright © 2009 Seagate Technology LLC. All rights reserved. Printed in U.S.A.Publication number: 100529372, Rev. A January 2009Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Pipeline HD...
Page 3 - Contents
Pipeline HD.2 Series SATA Product Manual, Rev. A i Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . ....
Page 4 - ii
ii Pipeline HD.2 Series SATA Product Manual, Rev. A
Page 5 - iii; List of Figures
Pipeline HD.2 Series SATA Product Manual, Rev. A iii List of Figures Figure 1. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Figure 2. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7 - Introduction; Pipeline HD; increased areal density.
Pipeline HD.2 Series SATA Product Manual, Rev. A 1 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Pipeline HD TM .2 Series model drive: These drives provide the following key features:• High instantaneous (burst) data-transfer...
Page 8 - About the Serial ATA interface; ers or other configuration options.
2 Pipeline HD.2 Series SATA Product Manual, Rev. A 1.1 About the Serial ATA interface The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary advantages include:• Easy installation and configuration with true plug-and-play connectivity. It is n...
Page 9 - Drive specifications; the drive; Specification summary tables
Pipeline HD.2 Series SATA Product Manual, Rev. A 3 2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following dr...
Page 10 - Drive specifications summary
4 Pipeline HD.2 Series SATA Product Manual, Rev. A Table 1: Drive specifications summary for 1000 Gbyte models Drive specification ST31000424CS ST31000322CS Formatted capacity (512 bytes/sector)* 1000 Gbytes Guaranteed sectors 1,953,525,168 Heads 4 Discs 2 Bytes per sector 512 Default sectors per tr...
Page 14 - Formatted capacity; Default logical geometry; LBA mode; Recording and interface technology
8 Pipeline HD.2 Series SATA Product Manual, Rev. A 2.2 Formatted capacity *One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. 2.2.1 LBA mode When addressing the drive in LBA mode, all blocks (secto...
Page 15 - Average
Pipeline HD.2 Series SATA Product Manual, Rev. A 9 2.5 Physical characteristics 2.6 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:• Track-to-track seek...
Page 16 - Power specifications; Power consumption; Avg 5V typ amps
10 Pipeline HD.2 Series SATA Product Manual, Rev. A 2.8 Power specifications The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 3 on page 20. 2.8.1 Power consumption Power requirements for the drives are listed in the table on page 9. Typical power measuremen...
Page 17 - Typical current profiles; Figure 1. Typical 12V startup and operation current profile; Conducted noise; injected noise at up to 10 MHz.; Voltage tolerance
Pipeline HD.2 Series SATA Product Manual, Rev. A 11 2.8.1.1 Typical current profiles Figure 1. Typical 12V startup and operation current profile 2.8.2 Conducted noise Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the +12 volt line or an ...
Page 19 - Environmental specifications; Nonoperating (Ambient
Pipeline HD.2 Series SATA Product Manual, Rev. A 13 2.9 Environmental specifications 2.9.1 Drive case temperature Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters). Drive case temperature should be measured at the location indica...
Page 21 - CE seek profile; Radio frequency environments; Test
Pipeline HD.2 Series SATA Product Manual, Rev. A 15 2.10 Acoustics emissions Drive emission of sound is measured consistent with the ECMA-74 and its referenced standards. Testing is conducted at room temperature (approximately 25 degrees C). Emission levels are reported as the total A-weighted sound...
Page 22 - Safety certification; Nonrecoverable read errors
16 Pipeline HD.2 Series SATA Product Manual, Rev. A 2.12 Reliability 2.12.1 Annualized Failure Rate (AFR) The product shall achieve an Annualized Failure Rate (AFR) of 0.55% when operated in an environment of ambient air temperatures of 25 ° C. Operation at temperatures outside the specifications in...
Page 23 - Korean RRL; • Certificate number: In process; FCC verification; . This booklet is available from the Super-
Pipeline HD.2 Series SATA Product Manual, Rev. A 17 Korean RRL If these drives have the Korea Ministry of Information and Communication (MIC) logo, they comply with para-graph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Fra...
Page 24 - Environmental protection; China Restriction of Hazardous Substances (RoHS) Directive; Corrosive environment; 中国限制危险物品的指令; 表示该部件(于同类物品程度上)所含的危险和有毒物质低于中国
18 Pipeline HD.2 Series SATA Product Manual, Rev. A 2.14 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.14.1 European Union Restriction of Hazardous Substances (RoHS) Dire...
Page 25 - Configuring and mounting the drive; Handling and static-discharge precautions; • Handle the drive by its edges or frame
Pipeline HD.2 Series SATA Product Manual, Rev. A 19 3.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. 3.1 Handling and static-discharge precautions After unpacking, and before installation, the drive may be expose...
Page 26 - Configuring the drive; Figure 2. Serial ATA connectors; Serial ATA cables and connectors; Figure 3. Attaching SATA cabling
20 Pipeline HD.2 Series SATA Product Manual, Rev. A 3.2 Configuring the drive Each drive on the Serial ATA interface connects point-to-point with the Serial ATA host adapter. There is no master/slave relationship because each drive is considered a master in a point-to-point relationship. If two driv...
Page 27 - Drive mounting
Pipeline HD.2 Series SATA Product Manual, Rev. A 21 3.4 Drive mounting You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting precau-tions when mo...
Page 29 - Hot-Plug compatibility
Pipeline HD.2 Series SATA Product Manual, Rev. A 23 4.0 Serial ATA (SATA) interface These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. For detailed in...
Page 30 - Serial ATA device plug connector pin definitions; installed in a blind-mate backplane configuration.; Serial ATA connector pin definitions
24 Pipeline HD.2 Series SATA Product Manual, Rev. A 4.2 Serial ATA device plug connector pin definitions Table 6 summarizes the signals on the Serial ATA interface and power connectors. Notes: 1. All pins are in a single row, with a 1.27 mm (0.050”) pitch. 2. The comments on the mating sequence appl...
Page 31 - Supported ATA commands; Command name
Pipeline HD.2 Series SATA Product Manual, Rev. A 25 4.3 Supported ATA commands The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA International Organization: Serial ATA Revision 2.6 (http://www.sata-...
Page 33 - Identify Device command; The Identify Device command (command code EC; xxxx
Pipeline HD.2 Series SATA Product Manual, Rev. A 27 4.3.1 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in Table 7 on pa...
Page 34 - Word
28 Pipeline HD.2 Series SATA Product Manual, Rev. A 60–61 Total number of user-addressable LBA sectors available(see Section 2.2 for related information)*Note: The maximum value allowed in this field is: 0FFFFFFFh (268,435,455 sectors, 137 Gbytes). Drives with capacities over 137 Gbytes will have 0F...
Page 35 - Bit
Pipeline HD.2 Series SATA Product Manual, Rev. A 29 Note. Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported Note. See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data. 108–111 The mandatory value of the world wide name (W...
Page 39 - Seagate Technology support services; Online services; Internet; For information regarding Seagate products and services, visit; mySeagate; Global Customer Support; Presales Support
Pipeline HD.2 Series SATA Product Manual, Rev. A 33 5.0 Seagate Technology support services Online services Internet For information regarding Seagate products and services, visit www.seagate.com . Worldwide support is available 24 hours daily by email for your questions. Presales Support: Presales@...
Page 40 - Customer Service Operations; Warranty Service; for the service center near you.; USA/Canada/Latin America support services; Direct dial; and Mexico; Europe, the Middle East and Africa Support Services
34 Pipeline HD.2 Series SATA Product Manual, Rev. A Customer Service Operations Warranty Service Seagate offers worldwide customer support for Seagate products. Seagate distributors, OEMs and other direct customers should contact their Seagate Customer Service Operations (CSO) representative for war...
Page 41 - Index
Pipeline HD.2 Series SATA Product Manual, Rev. A 35 Index A ACA 17 acceleration 14 acoustics 15 Active 12 Active mode 12 AFR 16 Agency certification 16 altitude 13 ambient temperature 9 , 10 Annualized Failure Rate 16 Annualized Failure Rate (AFR) 16 areal density 1 , 8 ATA commands 25 Australia/New...
Page 46 - Seagate Technology LLC
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100529372, Rev. A, Printed in U.S.A.
