Page 2 - BEFORE INSTALLATION; REPAIR AND ADD PARTICULAR FUNCTIONS.; FCC VERIFICATION; Caution; device, pursuant to part 15 of the FCC Rules.; Warning; required to take adequate measures.
BEFORE INSTALLATION NOTE: WE DO NOT TAKE ANY RESPONSIBILITY OF DAMAGES RESULTED FROM THE NON- STANDARDIZED GOODS AND FAILURES TO FOLLOW THE MANUAL INSTRUCATIONS. PLEASE ASK FOR HELP TO YOUR LAST SELLER BEFORE DISASSEMBLEING THE SYSTEM FOR REPAIR AND ADD PARTICULAR FUNCTIONS. FCC VERIFICATION Caution...
Page 3 - SAFETY PRECAUTIONS; to cause a risk of electric shock persons.; CAUTIONS; THIS PRODUCT USES A LITHIUM BATTERY.
SAFETY PRECAUTIONS EXPLANATION OF SYMBOLS This symbol is intended to alert the user to the presence of important operation and maintenance (servicing) instructions in the literature accompanying the appliance. This symbol is intended to alert the user to the presence of unprotected “dangerous voltag...
Page 4 - WARNINGS; follow instructions for the product.
WARNINGS The product should be installed by a trained professional. The DVR should be powered off when connecting camera, audio, or sensor cables. The manufacturer is not responsible for any damages caused by improper use of the product or failure to follow instructions for the product. The manufact...
Page 5 - RACK MOUNT INSTRUCTIONS; required for safe operation of the equipment is not compromised.
RACK MOUNT INSTRUCTIONS The following or similar rack-mount instructions are included with the installation instructions: A) Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the operating ambient temperature of the rack environment may be greater than room ambient. ...
Page 6 - CONTENTS OF DVR PACKAGE; DVR Set
CONTENTS OF DVR PACKAGE The package contains the main unit and its components as specified below. When you purchase the unit, please check to ensure the components specified below are included. DVR Set Client Software CD Remote Controller & Battery1.5V (AAA x 2EA) Adaptor (12V, 5A) & Power C...
Page 7 - VIDEO SIGNAL SELECT / SETTING; NOTICE; Do not change the setting when the power is on.
VIDEO SIGNAL SELECT / SETTING Video mode Video output SETTING NTSC PAL BNC VGA Factory Default O X O X X O O X O X X O X O X O NOTICE Do not change the setting when the power is on. When the position of the switch is changed, the DVR should be rebooted to apply the new setting. 7
Page 8 - COMPATIBLE HDD MODELS
COMPATIBLE HDD MODELS COMPANY MODEL SIZE RPM BUFFER INTERFACE HDS728080PLAT20 80 GB 7200 RPM 2 M E-IDE HDS721680PLAT80 82 GB 7200 RPM 8 M E-IDE HDT722516DLAT80 160 GB 7200 RPM 8 M E-IDE HDT722516DLAT80 164 GB 7200 RPM 8 M E-IDE HDS722525VLAT80 250 GB 7200 RPM 8 M E-IDE HDT722525DLAT80 250 GB 7200 RP...
Page 9 - CDRW INSTALLATION GUIDE; Open the top cover of DVR set and Install the CDRW inside the DVR.; MASTER
CDRW INSTALLATION GUIDE 1. Open the top cover of DVR set and Install the CDRW inside the DVR. 2. Fasten the screws on both side of CDRW as indicated in red circle below. 3. Connect the IDE CDRW 40pin cable and Power cable to the point on both CDRW and Main board as indicated in red circle below. 4. ...
Page 10 - HDD INSTALLATION GUIDE; the unit the supplied HDD fixing screws.
HDD INSTALLATION GUIDE 1. Unfasten the cover of the unit. 2. Fix the bracket to the hard disk using the supplied HDD mounting bracket screws. 3. Connect the supplied IDE HDD 80pin cable and Power cable to the hard disk and fix the hard disk to the unit the supplied HDD fixing screws. 4. HDD Jumper m...
Page 11 - SPECIFICATION
SPECIFICATION INPUT 4 Composite BNC (NTSC/PAL) – 1.0Vp-p 1 Composite BNC (NTSC/PAL) – 1.0Vp-p VIDEO OUTPUT (Selectable) 1 VGA (D-sub 15 pin) AUDIO INPUT & OUTPUT 4 Line In (RCA) & 1 Line Out (RCA) ALARM INPUT & OUTPUT 4 & 1 OS RTOS COMPRESSION MPEG-4 VIDEO FORMAT NTSC PAL RESOLUTION ...
Page 12 - TABLE OF CONTENTS
TABLE OF CONTENTS 1. FRONT PANEL AND REMOTE CONTROLLER ........................................................... 15 1-1. Front Panel ............................................................................................................................................... 15 1-2. Remote contro...
Page 15 - Front Panel and Remote controller; LED light is on when the system is accessing the hard disk.
1. Front Panel and Remote controller 1-1. Front Panel The following information will help you operate the front panel controls. Figure 1.1 Front panel Table1.1. Indication lamps Name Description n HDD LED light is on when the system is accessing the hard disk. o RECORD LED light is on when the syste...
Page 16 - USB Port
playback mode. Press to rewind the footage at 1x, 2x, 4x, and 8x speed in playback mode. Press to select audio mode such as SINGLE, MIX and MUTE. MUTE- All of 4 channels. SINGLE- Highlighted channel only. MIX- All of 4 channels. Jump/Step backward. In playback mode, the playback position moves 60 se...
Page 18 - Rear Panel and Connections
2. Rear Panel and Connections Figure 2.1. Rear Panel Table 2.1. Rear panel connections Connection DESCRIPTION n VIDEO IN Four connectors for video input. Connect camera output to Video-in (NTSC/PAL) o AUDIO IN Four connectors for audio input. p AUDIO OUT One connector for audio output. q VIDEO OUT C...
Page 19 - SENSOR INPUT
Figure 2.2. Rear Panel Connections Figure 2.3. Sensor input / Alarm output connections D ried C ontact 1 2 3 4 O U T (+) (- ) (+) (- ) +12 VDC ALA R M SE N SO R S ensor A dapte r SENSOR INPUT : Connect two signal lines of sensor (infrared rays sensor, heat perception sensor, magnetic sensor) to the ...
Page 20 - Setting up the DVR; The following sections detail the initial setup of the DVR
3. Setting up the DVR The following sections detail the initial setup of the DVR 3-1. SETUP - Main Screen When you press the SETUP button, the DVR will ask for a password (Figure 3.1.1). The default password is 1111, which can be entered by pressing the up button ( ) 4 times and then pressing the SE...
Page 26 - SYMBOL MEANING; Continuous recording mode
SYMBOL MEANING C Continuous recording mode M Motion detection triggered recording mode S Sensor triggered recording mode Figure 3.3.3. SCHEDULE Recording setup screen 3-4. Setup – Device Mode To set values for device, use the UP and DOWN controls to navigate through the menu items. Change the value ...
Page 28 - The following options are available on the PTZ control screen.; CHANNEL; (channel number that the PTZ is connected to); NAME; Set the storage parameters in the Storage setup screen.
The following options are available on the PTZ control screen. CHANNEL (channel number that the PTZ is connected to) NAME (protocol type) SPEED (19200, 14400, 9600, 4800, 2400) ID (0-63) 3-4-2. Motion Zone Setup When you select Partial Zone in the Motion Zone menu, you can set-up the motion sensing ...
Page 31 - SEND EMAIL
UP and DOWN arrow controls to change the value of month, week, day and hour. CAUTION: -Do not set the start time to 23:00 for DLS. -DLS can’t be applied, if the date of BEGIN and END is same. SEND EMAIL Enable/disable SEND EMAIL function. IP NOTIFICATION: Enable/disable sending daily e-mail reports ...
Page 33 - your current password and then the new password.; NETWORK PASSWORD
3-7. Setup – PASSWORD Mode Use the LEFT or RIGHT and UP and DOWN arrow controls to set the password. Figure 3.7.1. PASSWORD setup screen Table 3.7.1. Menu Items in PASSWRORD Setup Screen Item Description ADMIN PASSWORD Set the administrator password. After selecting this menu item you will be promot...
Page 36 - from IP sharer itself using “DMZ” function out of such sharer.; Item Description; The fixed IP address of the DVR unit
3-8-2. Network Types 3-8-2-1. LAN 1. Regarding to the use of fixed IP please ask your network administrator if you do not have this information. 2. When DVR is installed in IP sharer that is connected with ADSL, a user can assign fixed IP to DVR from IP sharer itself using “DMZ” function out of such...
Page 38 - The user ID for the ADSL connection; PASSWORD; The password for the ADSL connection
Item Description ID The user ID for the ADSL connection PASSWORD The password for the ADSL connection 3-8-3. Saving Setup of Network setup After changing the network configuration, confirmation
Page 39 - Select ON to reset the system to the default settings.
LOAD CONFIG User can upload the configuration of DVR to another DVR using the USB Memory stick. Put the USB stick on the front panel and press SEL to start the loading process. LOAD DEFAULT Select ON to reset the system to the default settings. (Password, date format, DLS, Network setting, and HDD O...
Page 40 - Select ON to reset the system to the factory default settings.
LOAD FACTORY DEFAULT Select ON to reset the system to the factory default settings. 3-9-1.Saving Setup To preserve the setup values that you have selected, select YES. Figure 3.9.2. SAVE SETUP screen 40
Page 41 - INDICATOR DESCRIPTION; Continuous recording in progress.
4. LIVE & SEARCH 4-1. LIVE Screen In the LIVE screen, video inputs from the cameras are displayed on the configuration of the live setup. Figure 4.1.1 shows the layout of the live screen. Various indicators showing the status of the DVR are shown as OSD symbols. Refer to Table 4.1.1 for the mean...
Page 45 - instances that fit the search criteria.
R(Manual), C(Continuous). 6. Once you have selected the type of recording to search for, press the SEL button to produce a list of instances that fit the search criteria. Figure 4.2.4. EVENT SEARCH screen Figure 4.2.5. EVENT SEARCH LIST screen 7. Use the UP and DOWN button to scroll through the onsc...
Page 46 - You can see the log list by selecting this item. Figure 4.2.7
Figure 4.2.6. GO TO SEARCH screen 4-2-4. GO FIRST You can access to the first data which has been recorded into USB Stick or CD media by pressing this menu. 4-2-5. GO LAST You can access to the last data which has been recorded into USB Stick or CD media by pressing this menu. 4-2-6. LOG List You ca...
Page 47 - Use the UP or DOWN button to scroll through the onscreen listings.
Figure 4.2.7. LOG LIST screen 4-2-7. ARCHIVE Search The ARCHIVE SEARCH screen (figure 4.2.8) is used to find the stored video. 1. Select the date on the calendar to begin searching by using the LEFT or RIGHT button. 2. Once you have selected the date, press the SEL button to move to the list of reco...
Page 49 - FOCUS near or far of the selected camera.; INITIALIZE; Initialize the PTZ settings of the selected camera.
Table 4.3.1. Button functions in PTZF control ITEM DESCRIPTION PAN / TILT Use the UP or DOWN button for TILT and LEFT or RIGHT button for PAN of the selected camera. ZOOM / FOCUS Use the UP or DOWN button for ZOOM in or out and LEFT or RIGHT button for FOCUS near or far of the selected camera. INITI...
Page 52 - VIDEO ARCHIVE
Figure 5.1.2. MEDIA Select Screen VIDEO ARCHIVE Video can be captured and archived onto the USB stick or CD media or hard drive while playing back recorded video. In playback mode, press the BACKUP button to launch the archiving function. When you press BACKUP button, the DVR will ask whether to arc...
Page 53 - -2. Transferring still images or video from the ARCHIVE list
Figure 5.1.4. ARCHIVING DURATION Setting Screen Then DVR will ask which media you will take for archiving as Figure. 5.1.2. Once you select the media, the system will start to archive the data to the selected media. Figure 5.1.5. ARCHIVE Ongoing Screen The DVR will convert the corresponding portion ...
Page 54 - the current selection.
the current selection. 5. Once the desired event has been selected, press SEL to view the still image or the first frame of the selected video. 6. Press the BACKUP button to launch the archiving function in playback mode. 7. See the Chapter 5-1 for archiving procedure. Figure 5.2.1. SEARCH menu scre...
Page 55 - file into the storage device.; During the backup, the DVR will operate in Simplex; -3. Playing AVI video from USB memory stick or PC through Network S/W; install ‘ffswhow’ CODEC that can download it from open sites.
Figure 5.2.3. ARCHIVE LIST Screen Figure 5.2.4. VIDEO TYPE Select Screen In the case of video, the system will change the video and audio into AVI format while transferring the video file into the storage device. NOTICE During the backup, the DVR will operate in Simplex 5-3. Playing AVI video from U...
Page 56 - Upgrading Firmware; In order to upgrade, the firmware upgrade file must
6. Upgrading Firmware In order to upgrade, the firmware upgrade file must
Page 57 - Network – By an exclusive viewer; client program on your PC.; frame rate on the DVR.
7. Network – By an exclusive viewer The DVR provides a live remote monitoring feature. Remote monitoring requires installation of a software client program on your PC. NOTICE In a high bandwidth network, a maximum of four users can access one DVR simultaneously. In a low bandwidth network it is reco...
Page 63 - Security Option; Set a password for security options.; Save Path; rate and Frame rate.; Time Format; : Change the way the Client software displays the time.
Security Option : Set a password for security options. Save Path : Specify the location to record the receiving video for Backup and still image for Capture. Automatic reconnection : If a user selects this function, the client S/W will automatically try to connect to the previously connected IP addr...
Page 65 - also set each or all channels to record.
When you set the recording condition to Event, you can set event for motion or alarm with duration. You can also set each or all channels to record. 7-6-5. Disk You can select which local disk to use and the amount of disk space you want to allow the program to use for recording. You can also choose...
Page 67 - -1. Download Web Brower Viewer and Connection; User needs to access
8. Network – By an web-browser viewer The DVR provides a live remote monitoring feature by web-browser viewer. 8-1. Download Web Brower Viewer and Connection 1. User needs to access http://anytimeview.com/ to get a web browser viewer. Then the window will appear as bellow. Click “YES” to download We...
Page 68 - Displays the current date and time.; CONNECT; Click this icon to connect to the DVR; SEARCH; Click this icon to search for recorded video.
8-2. Main Features 8-2-1. Live Figure 8.2.1. Main user interface - Live Table 10.2.1. Main controls in Live No Name Description 1 DATE & TIME Displays the current date and time. 2 CONNECT Click this icon to connect to the DVR 3 SEARCH Click this icon to search for recorded video. 68
Page 71 - APPENDIX; B. Please select proper network type and set DDNS as ON.; DHCP; automatically assigned by the DHCP server.; LAN; and private IP address.; -2. Checking Mac address on the rear panel of DVR and Serial Number
APPENDIX 1. How to register DDNS (Dynamic Domain Name Server) If DVR is installed in network using dynamic IP addressing and user want to access DVR with domain name instead of IP address, user should register DVR and domain name with DDNS. 1-1. Setting of NETWORK Setup menu A. Please go to SETUP>...
Page 72 - NOTE; Please go to
Mac address 00026900A12B Registration No. HDC462135789 NOTE : If there is not registration No. on the system, please contact the distributor or manufacturer. 1-3. Registration at DDNS Please go to http://ddnscenter.com Input MAC Address and Serial Number that you checked from the rear of DVR. And in...
Page 73 - Network access using Domain name; A. Run Network Client S/W program and click the “connect” button.
2. Network access using Domain name If DDNS registration is successful, you can access your DVR via the provided Network Client S/W. A. Run Network Client S/W program and click the “connect” button. B. Enter your domain name instead of IP address in the “IP Address” field. C. Enter the Port No., Pro...
