Page 2 - WARNING; DVR
WARNING DVR All the safety and operating instructions should be read before operation. The improper operation of this device may cause permanent damage. ‧ Please use the provided adapter (Other adapter is not suitable for this machine). ‧ Please lift and place this equipment gently. ‧ Do not expose ...
Page 3 - TABLE OF CONTENTS
DVR TABLE OF CONTENTS What do you get What do you get ? ? ‧ FEATURES ---------------------------------------------------------------------------------------- ‧ PACKAGE CONTENTS ------------------------------------------------------------------------- Before Operation Before Operation ‧ INSTALLATION ...
Page 4 - FEATURES; DVR Features; PACKAGE CONTENTS
FEATURES What do you get ? DVR Features • Wavelet Compression Format replaces Time-Lapse VCR + Multiplexer • 4 Audio inputs / 2 Audio outputs (selectable 1-channel recording) • On Screen Display and RTC (Real time clock) Function • Support from 1 channel to 4 channels of video inputs • Picture-In-Pi...
Page 5 - COMPATIBLE HARD DISK BRANDS
INSTALLATION GUIDE Before Operation 1. Connect cameras and monitor with the DVR. 2. Shown below is one example for connecting the DVR to your existing Observation System. 3. Install HDD (The compatible HDD Brands are listed in the following table.) Please refer to page.19 Appendix #1 for installatio...
Page 6 - FRONT PANEL; REMOVABLE HDD CARTRIDGE
FRONT PANEL DVR 4 2 1 3 HDD HDD FULL REW FF STOP TIMER ALARM P OWER P LAY RE C CDR-04S E NT ER ME NU S EA RCH S LO W Z 0 0 M 1 2 3 4 5 6 7 8 9 10 1 1 1 2 13 14 15 16 1 7 1. REMOVABLE HDD CARTRIDGE Please refer to page 19, Appendix #1. 2. LED LIGHT The LED Light is ON under following conditions. ‧ HD...
Page 8 - BACK PANEL
BACK PANEL DVR RISK OF ELECT RIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF ELECT RIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PART S INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. 75 Ω HI POWER EXTERNAL I/O INPUT LOOP CALL 2 MAIN 1 IN L 4 3 R OUT 1 2 3 4 5 6 7 8 9 1...
Page 9 - RECORDING; MOTION TRIGGER RECORD
START THIS UNIT Basic Operation Before using the DVR, please have a HDD installed ready. (refer to Appendix #1 for installation or removal of a HDD). Connect the AC Power Cord with Power Adapter and plug into an electrical outlet. The Red LED indicator light will be ON and the DVR is in Standby mode...
Page 10 - PLAY
PLAY Press “ PLAY ” button, the DVR will show the last recording. 1. FAST FORWARD (F.F. ) & FAST REWIND (F.R.) You can increase the speeds of Fast Forward and Rewind on the DVR.In the Play mode, press ” ►► ” once to get 2X speed forward and press twice to get 4X speed,… and the maximum speed can...
Page 11 - MAIN MENU
ACCESS MENU Detailed Menu Setup The Menu allows you to configure your DVR settings. Please follow below steps to access the Menu : Password: 0000 Press the Menu button. The password screen will appear: The default Password is 0000. Simply press the Enter button to access the Menu. NOTE : To key-in t...
Page 12 - MENU OPTIONS; SYSTEM; MOTION AUDIBLE ALARM
MENU OPTIONS DVR SYSTEM 1. AUDIO INPUT To choose one of 4 channels to record. ( only can select 1 during operation for recording ) (MENU) TIMER RECORD CAMERA ► SYSTEMEVENT 2. INT AUDIBLE ALARM To set the INTERNAL AUDIBLE ALARM. It will be triggered by event occurrence when the setting is ON. 11 5. A...
Page 13 - REMOTE PROTOCOL ID SETUP
12. CLEAR HDD Delete all the contents of your HDD. When you choose “YES” on this option, you will be prompted with the question shown : Press “ ► ” to clear HDD or press ” ◄ ” to confirm not to clear HDD. 13. SYSTEM RESET Reset all system settings back to factory default settings. 14. REMOTE MODE Se...
Page 14 - RECORD; MOTION TRIGGER RECORD; CAMERA
RECORD 1. HDD OVERWRITE Select “YES” to overwrite previously recorded video in HDD. NOTE : When the HDD is full under O/W Recording mode, previous recorded files may be overwritten without further warning notices. 2. RECORD IPS Select the images per second of recording. The options are as following ...
Page 15 - MOTION DETECTION; MOTION DETECTION SETUP
MOTION DETECTION DVR MOTION DETECTION SETUP 1. Press “ MENU “ to enter the menu set up, then “ Down ” to CAMERA setup. 2. Press “ENTER” twice to enter the Motion Detection Setup. 3. Each screen displays the current camera picture overlaid with the motion targets (as Figure 1). You can push the butto...
Page 16 - EVENT
Figure 1-1 MOTION DETECTION SETUP — 1~15 Figure 1 MOTION DETECTION SETUP 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 032 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 032 Figure 1-3 MOTION DETECTION SETUP-- ALL Figure 1-2 MOTION...
Page 17 - OPERATION OPTIONS
PICTURE IN PICTURE (PIP) Press PIP button to enter PIP display screen. The PIP format displays a full screen “background” picture with a 1 / 16 size screen “insert”. Æ Press button to move the insert screen. Æ Press “Enter” button to confirm the camera selection. Æ Press “Left” or “Right” to choose ...
Page 18 - KEY LOCK; TROUBLESHOOTING
DVR KEY LOCK For added security, you can “Lock” the buttons on your DVR. Locking disables the buttons and prevents other people from using the system. Press ENTER and MENU at the same time to enable Key Lock.Press ENTER and MENU at the same time and key in password (Default : 0000), then press “ENTE...
Page 19 - SPECIFICATIONS
SPECIFICATIONS DVR Vide o forma t NTSC/EIA or PAL/CCIR Ha rd disk stora ge IDE type, UDMA 66, supported 250 GB HDD Re cord mode Manual / Alarm / Timer / Motion Ca me ra Input Signa l Composite video signal 1 Vp-p 75 Ω BNC, 4 channels Ca me ra Loop Ba ck Composite video signal 1 Vp-p 75 Ω BNC, 4 chan...
Page 20 - APPENDIX #1 – INSTALLING the HDD
APPENDIX #1 – INSTALLING the HDD Please follow the steps carefully in order to ensure correct installation. The compartment located on the front panel of the DVR is the removable Cartridge Casing, in which you insert the HDD. The various parts of the Cartridge Casing are labeled for your reference. ...
Page 22 - APPENDIX #2 – PIN CONFIGURATIONS
APPENDIX #2 – PIN CONFIGURATIONS 25 pin com port DVR 9 pin com port DVR 21
Page 23 - PIN 13. EXTERNAL ALARM NO
PIN 1. GND GROUND PIN 4, 5, 17, 18 ALARM INPUT To connect wire from ALARM INPUT (PIN 4, 5, 17, 18) to GND ( PIN 1 ) connector, DVR will start recording and buzzer will be on. When Menu/ Camera/ Alarm is set up to “Low” : When alarm input signal is “ Low ”, the unit starts to record and buzzer.When M...
Page 24 - Front Angle with Rock Mount
APPENDIX #3 – RACK MOUNT Screws and brackets for rack mounting applications can be purchased as an optional accessory. Front Angle with Rock Mount Side View with Rack Mount 23
Page 25 - APPENDIX #4 – RECORDING TIME; NTSC SYSTEM
APPENDIX #4 – RECORDING TIME The Record Time is different based on Record Speed and Record Quality. Please refer to following table. NTSC SYSTEM 25A 15 8 4 2 1 Best 32hr 64hr 120hr 240hr 480hr 960hr High 40hr 80hr 151hr 300hr 600hr 1200hr Normal 64hr 128hr 240hr 480hr 960hr 1920hr Basic 107hr 213hr ...
