Matrix Decor MDF4711110V - User Manual

Installation & Operating Instructions for the

Owner’s Installation ,Manual

WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

Parrotuncle Lighting, 218 Black Tie Lane, Chapel Hill, NC

www.parrotuncle.com

Parrot Uncle YOU CAN BE SURE OF are trademarks of Eileen Grays LLC.

Used under license by Eileen Grays LLC.

Made in China

THANK YOU FOR YOUR PURCHASE

SAFETY RULES

SKU

Rated Voltage

Light CCT.

Rated power(motor)

.

110-120 VAC

6xE12 Max. 25W

F4701

56W

Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all

instructions before using the product

1. Mounting Bracket

2. Canopy screws

3. Canopy

4. Decorative canopy cover

5. Downrod &hanger ball

6. Bolt

7. Coupling cover

8. Pin

9. Top housing

10. Blades

11. Fan motor assembly

12. Light pan

13. Garnish nuts

14. Crystal chain A

15. Crystal chain B

16. Wood screws

17. Expansion screw

18. Screw washers

19. Balance tapes

20. Remote control

BEFORE INSTALLATION

Unpack your fan and check the contents.You should have followings:

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION. IF UNSURE CONSULT

A QUALIFIED ELECTRICIAN

INSTALLING THE FAN

Tools Required: Phillips screwdriver, Pair of pliers, straight slot screwdriver, adjustable wrench, step ladder, and wire cutters.

INSTALLLING THE MOUNTING BRACKET

The ceiling fan must be installed in a location so that the blades are 12”( 300mm) spacing from the tip of the blade to the nearest objects or walls. When hanging the Fan REMEMBER to turn off the

power. Follow the instruction below to hang your fan properly:

NOTE:Hanger after the installation must be able to withstand the weight of 45kg or more

1. For concrete ceiling, drill two holes in

the ceiling and secure the mounting

bracket to the ceiling with two

Φ

0.32”(8mm)

（

distance between the

two holes should be appropriate

）

expansion screws, flat washers,nuts

provided and tighten with a spanner.

2. For wood ceiling, Secure the

mounting bracket to the ceiling is

capable of carrying a load of at least

100lbs(45kgs) with two long mounting

screws and washers provided. Be sure

at least 0.12”(30mm) of the screw is

threaded into the support.

3. For installing to outlet box, secure the outlet box

directly to the building structure. Use appropriate

fasterners and building materials. The outlet box and its

support must be able to fully support the moving weight

of the fan(at least 100lbs). Use a UL listed metal outlet

box. Do not use a plastic outlet box. Figure 1& 2

examples to mount the outlet box.

1. To avoid possible electric shock, turn off the electricity at the main fuse box or circuit panel before you begin the fan installation or before

servicing the fan or installing accessories.

2. Read all instructions and safety information carefully before installing your fan and save these instructions.

3. Make sure all electrical connections comply with local codes or ordinances and the National Electrical Code. If you are unfamiliar with electric

wiring, please use a qualified and licensed electrician.

4. Make sure you have a location selected for your fan that allow clear space for the blades to rotate, and at least seven (7) feet of clearance

between the floor and the fan blade tips. The fan should be mounted at least thirty (30) inches from walls or other upright structures.

5.

WARNING:

The outlet box and ceiling support joist used must be securely mounted, and capable of supporting at least 100 pounds. To reduce

the risk of fire, electric shock or personal injury, mount to the outlet box marked acceptable for fan supported and use mounting screws provided

with the outlet box. The box must be supported directly by the building structure.

6.

WARNING:

To reduce the risk of fire, electric shock or personal injury, mount to outlet box marked “acceptable for fan support” and use

mounting screws provided with the outlet box most outlet boxes commonly used for the support of lighting fixtures are not acceptable for fan

support and may need to be replaced. Consult a qualified electrician if in doubt.

7. Electrical diagrams are for reference only. Light kits that are not packed with the fan must UL listed and marked suitable for use with the model

fan you are installing. Switches must be UL. general use switches. Refer to the instructions packaged with the light kits and switches for proper

assembly.

8. After installation is complete, check that all connections are absolutely secure.

9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into outlet box. The wires should be

spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

10.

WARNING:

To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device, or rheostat.

11. Do not insert anything into the fan blades while they are rotating.

12.

WARNING:

To reduce the risk of personal injury, do not bend the blade brackets (also referred to as “flanges”) during assembly or after

installation. Do not insert objects in the path of the blades.

13. To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.

14. Do not use water or detergent when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most

cleaning.

15. The fan is suitable for indoor use only.

16. Please do not use the fan in a specific environment like high temperature environment, high radiation environment, lampblack or

other abnormal use environments.

NOTE:

Please do not use the fan in a specific environment like high temperature environment, high radiation environment, lampblack or other

abnormal use environments.

NOTE:

The important safety precautions and instructions appearing in the manual are not meant to cover all possible conditions and situations

that may occur. It must be understood that common sense and caution are necessary factors in the installation and operation of this fan.

NOTE:

This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities are different or

are impaired, or lack of experience or knowledge, unless such persons are supervised or trained to operate the appliance by a person responsible

for their safety.

NOTE:

Children should be supervised to ensure that they do not use appliances as a toy.

TECHNICAL INFORMATION

All rights reserved.

4. Refer to the Fig. in right for mounting

when the ceiling is angled max. 15

degree angle.

F4711