Matrix Decor MDF4601Y110V - User Manual

Installation & Operating Instructions for the

F4

6

01

Parrotuncle Owner’s Installation ,Manual

WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

Parrotuncle Lighting, 218 Black Tie Lane, Chapel Hill, NC

www.parrotuncle.com

Parrot Uncle YOU CAN BE SURE OF are trademarks of Eileen Grays LLC.

Used under license by Eileen Grays LLC.

Made in China

THANK YOU FOR YOUR PURCHASE

SAFETY RULES

SKU

Rated Voltage

Light CCT.

Rated power(motor)

.

110-120V AC

4000K

F4601WH

56W

110-120V AC

3000K

F4601Y

56W

110-120V AC

4000K

F4601

56W

110-120V AC

4

000K

F4601BZ

56W

Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all

instructions before using the product

1. Mounting Bracket x1

2. Canopy screws x 2

3. Canopy x 1

4. Downrod&hanger ball x 1

5. Bolt x 1

6. Coupling cover x 1

7. Pin x 1

8. Top housing x 1

9. Blades x 4

10. Fan motor assembly x 1

11. Base plate x 1

12. Lamp shade x 1

13. Light pan x 1

14. Wood screws x 2

15. Expansion screw x 2

16. Plastic anchor x 2

17. Balance tapes x 4

18. Remote control x 1set

19. Crystal chain x 61

20. Crystal bead x 61

BEFORE INSTALLATION

Unpack your fan and check the contents.You should have followings:

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION. IF UNSURE CONSULT

A QUALIFIED ELECTRICIAN

110-120V AC

4

000K

F4601BK

56W

1.

To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box before beginning.

2.

All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical installation should be

performed by a qualified licensed electrician.

3.

WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed control device.

4.

WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked "Acceptable for Fan Support of

45kg (99.12 lbs.) Or Less" and use mounting screws provided with the outlet box. Most outlet boxes commonly used for the support

of light fixtures are not acceptable for fan support and may need to be replaced. Due to the complexity of the installation of this fan, a

qualified licensed electrician is strongly recommended.

5.

The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45KGS. Use only

UL Listed outlet boxes marked FOR FAN SUPPORT.

6.

The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.

7.

Avoid placing objects in the path of the blades.

8.

To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.

9

.

Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for

most cleaning.

10.

After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The

wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.

11.

Electrical diagrams are for reference only.

12.

The fan is suitable for indoor use only.

13.

Please do not use the fan in a specific environment like high temperature environment, high

radiation environment, lampblack or other abnormal use environments.

TECHNICAL INFORMATION

All rights reserved.

110-120V AC

4

000K

F4601FG

56W

INSTALLING THE FAN

Tools Required: Phillips screwdriver, Pair of pliers, straight slot screwdriver, adjustable wrench, step ladder, and wire cutters.

INSTALLLING THE MOUNTING BRACKET

The ceiling fan must be installed in a location so that the blades are 12”( 300mm) spacing from the tip of the blade to the nearest objects or walls. When hanging the Fan REMEMBER to turn off the

power. Follow the instruction below to hang your fan properly:

NOTE:Hanger after the installation must be able to withstand the weight of 45kg or more

1. For concrete ceiling, drill two holes in

the ceiling and secure the mounting

bracket to the ceiling with two

Φ

0.32”(8mm)

（

distance between the

two holes should be appropriate

）

expansion screws, flat washers,nuts

provided and tighten with a spanner.

2. For wood ceiling, Secure the

mounting bracket to the ceiling is

capable of carrying a load of at least

100lbs(45kgs) with two long mounting

screws and washers provided. Be sure

at least 0.12”(30mm) of the screw is

threaded into the support.

3. For installing to outlet box, secure the outlet box

directly to the building structure. Use appropriate

fasterners and building materials. The outlet box and its

support must be able to fully support the moving weight

of the fan(at least 100lbs). Use a UL listed metal outlet

box. Do not use a plastic outlet box. Figure 1& 2

examples to mount the outlet box.

4. Refer to the Fig. in right for mounting

when the ceiling is angled max. 15

degree angle.