Matrix Decor MDF3502110V - User Manual

F3502

Installation & Operating Instructions for the

Owner’s Installation ,Manual

WARNING:SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER

THANK YOU FOR YOUR PURCHASE

SAFETY RULES

SKU

Rated Voltage

Light CCT.

Rated power(motor)

110-120V AC

E12 3x40W(MAX)EXCLUDE

34W

Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all

instructions before using the product

1. Mounting Bracket x1
2. Canopy screws x 2
3. Canopy x 1
4. Downrod&hanger ball x 1
5.

Bolt x 1

6. Coupling cover x 1
7.

8.Lock pin x 1

　

9.Top housing x 1

　

Blades x 3

10.
11.Fan motor assembly x 1

12.Base plate x 1

13.Lamp shade x 1

14.Light pan

x 1

17.

18.Wood screws x 4

19.Expansion screw x 2

20.Plastic anchor x 4
21.Balance tapes x 2

Crystal chain x 37

22.Remote control x 1s

et

Crystal bead x 37

BEFORE INSTALLATION

Unpack your fan and check the contents.You should have followings:

CAUTION

READ INSTRUCTIONS CAREFULLY FOR SAFE

INSTALLATION AND FAN OPERATION. IF UNSURE CONSULT

A QUALIFIED ELECTRICIAN

1.

To reduce the risk of electric shock, insure electricity has been turned off at the circuit breaker or fuse box

2.

All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical

installation should

be performed by a qualified licensed electrician.

3.

WARNING: To reduce the risk of electrical shock and fire, do not use this fan with any solid-state fan speed

4.

WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked "Accep-

table for Fan Support of 45kg (99.12 lbs.) Or Less" and use mounting screws provided with the outlet box.

Most outlet boxes commonly used for the support of light fixtures are not acceptable for fan support and may

need to be replaced. Due to the complexity of the installation of this fan, a qualified licensed electrician is

The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum

of 45KGS. Use only UL Listed outlet boxes marked FOR FAN SUPPORT.

The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.

Avoid placing objects in the path of the blades.

To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning

9

.

Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened

cloth will be suitable for most cleaning.

10.

After making electrical connections, spliced conductors should be turned upward and pushed carefully up

into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-

11.

Electrical diagrams are for reference only.

12.

The fan is suitable for indoor use only.

13.

Please do not use the fan in a specific environment like high temperature environment,

high radistion environment,lampblack or other abnormal use environments.

TECHNICAL INFORMATION

INSTALLING THE FAN

Tools Required: Phillips screwdriver, Pair of pliers, straight slot screwdriver, adjustable wrench, step ladder, and wire cutters.

INSTALLLING THE MOUNTING BRACKET

The ceiling fan must be installed in a location so that the blades are 12”( 300mm) spacing from the tip of the blade to the nearest objects or walls. When hanging the Fan REMEMBER to

turn off the power. Follow the instruction below to hang your fan properly:

NOTE:Hanger after the installation must be able to withstand the weight of 45kg or more

1. For concrete ceiling, drill two holes in

the ceiling and secure the mounting

bracket to the ceiling with two

Φ

0.32”(8mm)

（

distance between the

two holes should be appropriate

）

expansion screws, flat washers,nuts

provided and tighten with a spanner.

2. For wood ceiling, Secure the

mounting bracket to the ceiling is

capable of carrying a load of at least

100lbs(45kgs) with two long mounting

screws and washers provided. Be sure

at least 0.12”(30mm) of the screw is

threaded into the support.

3. For installing to outlet box, secure the outlet box

directly to the building structure. Use appropriate

fasterners and building materials. The outlet box and its

support must be able to fully support the moving weight

of the fan(at least 100lbs). Use a UL listed metal outlet

box. Do not use a plastic outlet box. Figure 1& 2

examples to mount the outlet box.

4. Refer to the Fig. in right for mounting

when the ceiling is angled max. 15

degree angle.

grounding conductor on one side of theoutlet box.

before beginning.

control device.

strongly recommended.

the fan.

F3502

15.
16. Garnish nuts x3

　

Canopy cover x 1

1

10
11

7

9

2

3

4

6

5

8

12

13

16

14

15

17

2 4 8

hr

1

2

3

22

18 19 20 21

BEFORE INSTALLATION

Unpack your fan and check the contents.You should have followings:

1

.

Mounting Bracket x 1

2

.

Canopy screws x 2

3

.

Canopy x 1

4

.

Downrod&hanger ball x 1

5

.

Bolt x 1

6

.

Coupling cover x 1

7

.

Lock pin x 1

8

.

Top housing x 1

9

.

Blades x 3

10

.

Fan motor assembly x 1

11

.

Base plate x 1

12

.

Lamp shade x 1

13

.

Light pan x 1

14

.

Wood screws x 4

15

.

Expansion screw x 2

16

.

Plastic anchor x 4

17

.

Balance tapes x 2

18

.

Remote control x 1set

19

.

Crystal chain x 37

20

.

Crystal bead x 37

1

10
11

7

9

2

3

4

6

5

8

12

13

16

14

15

17

2 4 8

hr

1

2

3

22

18 19 20 21

F3502

Installation & Operating Instructions for the

Owner’s Installation ,Manual

WARNING : SHU T POWE R OF F AT FUS E OR CIRCUI T BREAKER

Canopy

cover

x 1

21

.

22

.

Garnish nuts x 3

All rights reserved.

Made in China

All rights reserved.

Made in China