Master Bilt MPM-72 - Manual

Page 3 - TABLE OF CONTENTS; INSTALLATION INSTRUCTIONS............................................................................................... 6

3 TABLE OF CONTENTS INTRODUCTION………………………………….……………………………………………………………………4 STORE CONDITIONS / LOCATION..………….…..………………………………………………………………..4 WARNING LABELS AND SAFETY INSTRUCTIONS………..…..……………………………………………… 5 PRE-INSTALLATION INSTRUCTIONS………………………..…..………………………………….…………… 6 Inspection for ShippingDamage...

Page 4 - INTRODUCTION; series open air case. Read all these documents carefully; NOTICE

4 INTRODUCTION Thank you for purchasing a Master-Bilt cabinet. This manual contains important instructions for installing, using and servicing a Master-Bilt MPM/QMPM series open air case. Read all these documents carefully before installing or servicing your equipment. This manual should be left in ...

Page 5 - WARNING LABELS AND SAFETY INSTRUCTIONS; Severe injury or death will occur if you ignore the message.

5 CAUTION! GROUND REQUIRED FOR SAFE OPERATION The portion of this manual covering refrigeration and electrical components contains technical instructions intended only for persons qualified to perform refrigeration and electrical work. This manual cannot cover every installation, use or service situ...

Page 6 - PRE-INSTALLATION INSTRUCTIONS; INSPECTION FOR SHIPPING DAMAGE

6 PRE-INSTALLATION INSTRUCTIONS INSPECTION FOR SHIPPING DAMAGE You are responsible for filing all freight claims with the delivering truck line. Inspect all cartons and crates for damage as soon as they arrive. If damage is noted to shipping crates or cartons or if a shortage is found, note this on ...

Page 7 - GENERAL INSTRUCTIONS; INSTALLATION INSTRUCTIONS; SAFE; (MPM SHOW N – Typical for QMPM)

7 INSTALLATION INSTRUCTIONS GENERAL INSTRUCTIONS 1. Be sure the equipment is properly installed by competent service people. 2. Keep the equipment clean and sanitary so it will meet your local sanitation codes. W ipe up all spills,clean with water and a mild detergent, then rinse with clean water. A...

Page 8 - FINAL CHECK LIST

8 CONDENSATE EVAPORATOR The MPM/QMPM is designed to operate in an environment of 75 ° ambient and 55% relative humidity. W hen the conditions are applicable for condensation such as high temperature and high humidity, a large capacity condensate evaporator has been installed in the MPM/QMPM to ensur...

Page 12 - SALE AND DISPOSAL; OWNER RESPONSIBILITY

11 SALE AND DISPOSAL OWNER RESPONSIBILITY If you sell or give away your Master-Bilt cabinet you must make sure that all safety labels and the Installation - Service Manual are included with it. If you need replacement labels or manuals, Master-Bilt will provide them free. Contact the customer servic...

Master Bilt MPM-72 - Manual

Table of Contents:

Summary

Other Master Bilt Models