Master Bilt 48 - Manual
Master Bilt 48 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – TABLE OF CONTENTS; Inspection for Shipping Damage.....................................................................................; INSTALLATION INSTRUCTIONS............................................................................................... 6; General Instructions.......................................................................................................; SERVICE INSTRUCTIONS .....................................................................................................11
- Page 4 – The store temperature should be at or below 75; NOTICE
- Page 5 – WARNING LABELS AND SAFETY INSTRUCTIONS; Severe injury or death will occur if you ignore the message.
- Page 6 – PRE-INSTALLATION INSTRUCTIONS; INSPECTION FOR SHIPPING DAMAGE
- Page 7 – The cabinet should be grounded.
- Page 9 – MASTER-BILT ELECTRONIC REFRIGERATION CONTROL; Compressor; The control uses off cycle defrost for the BMG/TMG cooler.; MANUAL DEFROST
- Page 10 – PROBE CONNECTIONS
- Page 11 – SERVICE INSTRUCTIONS; High head pressure and high back pressure:
- Page 12 – TEMPERATURE SENSORS AND FAN MOTOR REPLACEMENT; Before making any change, technician should:
- Page 13 – MASTER-BILT PART LIST; Description
- Page 14 – SALE AND DISPOSAL; OWNER RESPONSIBILITY
1
BMG/TMG -27, 48, 52, 74, 80
LAE CONTROLLER
Installation & Operations Manual
Master-Bilt Products
908 Highway 15 North
New Albany, MS 38652
Phone: (800) 684-8988
PN 075-90000
Rev 4-26-11
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
3 TABLE OF CONTENTS INTRODUCTION………………………………….……………………………………………………………………4 STORE CONDITIONS…………………………….……………….…..…………………………………………….. 4 WARNING LABELS AND SAFETY INSTRUCTIONS………..…..……………………………………………… 5 PRE-INSTALLATION INSTRUCTIONS………………………..…..………………………………….…………… 6 Inspection for Shipping Damage…………...
4 INTRODUCTION Thank you for purchasing a Master-Bilt cabinet. This manual contains important instructions for installing, using, and servicing a Master-Bilt BMG/TMG case. A parts list is included with this manual. Read all these documents carefully before installing or servicing your equipment. STO...
5 CAUTION! GROUND REQUIRED FOR SAFE OPERATION WARNING LABELS AND SAFETY INSTRUCTIONS This symbol is the safety-alert symbol. W hen you see this symbol on your cabinet or in this manual, be alert to the potential for personal injury or damage to your equipment. Be sure you understand all safety messa...
