Martin Audio CS10 - Manual - manualsarea.com

Page 2 - Preliminary User Guide; CS10 & CS10T ceiling subwoofers; These products conform to the requirements of the EMC; Safety warning

1 Preliminary User Guide CS10 & CS10T ceiling subwoofers C10.1R & C10.1C full-range 10” ceiling loudspeakers (including transformer versions C10.1RT and C10.1CT) Unpacking Thank you for purchasing a Martin Audio ceiling loudspeaker system. Every Ma rtin Audio loudspeaker is built to the high...

Page 3 - CS10 ceiling subwoofer; Introduction; The subwoofer is fixed via three wrap-around brackets.; CS10 specifications

2 CS10 ceiling subwoofer Introduction The CS10 is a self-contained subwoofer, utilising an 8ohm 10" (250mm) low frequency driver, designed specifically to be mounted above a suspen ded ceiling replacing one 600mm x 600mm tile. The enclosure is made from fire retardant MDF and the grille is perfo...

Page 4 - Voltage & power settings available; Model Direct

3 CS10 dimensions Transformer version CS10T The CS10 ceiling subwoofer is available with an optional high power transformer. Th e transformer coupled version is called the CS10T. Voltage & power settings available Model Direct 100V operation 70V operation (200W AES (Transformer versions – suffix...

Page 5 - Do not

4 CS10T ceiling subwoofers have a transformer power selector switch on the connector panel (location arrowed) CS10 Installation notes Note carefully! Martin Audio ceiling loudspeakers must be installed by experienced ceiling loudspeaker installation technicians It is the installer’s respons ibility ...

Page 6 - Bracket mounted vertically Bracket mounted horizontally

5 These brackets and their associated M8 socket head bolts are supplied with the unit. The brackets will accept either eyebolts, or 8mm threaded rod. Brackets may be mounted either vertically (for hanging) or horizontally (for side fixing). Bracket mounted vertically Bracket mounted horizontally One...

Page 7 - Connections; Amplifier power input is via a 4-pin rising clamp plug providing

6 The subwoofer grille may be positioned so that it visually replaces a ceiling tile in a suspended ceiling but , we repeat - the subwoofer must not rely on the suspended ceiling structure for its support . Hint: It is easier to install your CS10 above a suspended ceiling structure if you temporaril...

Page 10 - C10.1C specifications

Page 12 - Installation notes; These enclosure must be installed in; Input & Loop through

11 Please note : The HF compression driver sections of the C10. 1R and C10.1C ceiling loudspeakers are protected with a PTC (positive temperature coefficient) device and will quieten if overdriven. The PTC device will reset itself once the signal is reduced to a more sensible level. Installation not...

Page 13 - Warranty

12 Warranty Martin Audio ceiling loudspeaker products are warranted against manufacturing defects in materials or craftsmanship over a period of 5 years from the date of original purchase. During the warranty period Martin Audio will, at its discretion, either repair or replace products which prove ...

Martin Audio CS10 - Manual

Table of Contents:

Summary

Other Martin Audio Models