Page 3 - Contents
3 Contents Product Overview ............................................................................................................................................... 5 Features ........................................................................................................................
Page 6 - Installation and Initial Setup; Unpacking
6 Installation and Initial Setup ■ Unpacking Carefully unpack the QV171-HDSDI monitor and verify that the following items are included: • QV171-HDSDI Monitor• V-PS12-5V-1 Power Supply with 2-Pin Twist Lock Connector• Operating Instructions Inspect the unit for any physical damage that may have occur...
Page 7 - Top and Front Panel Features
7 Top and Front Panel Features Power Button Turn the monitor off or on by pressing the powerbutton. In the ON state, the LED on the powerbutton will illuminate green. Input Channel Buttons Pressing Ch.1 , Ch.2 , Ch.3 , or Ch.4 will select HDSDI-SDI Video Inputs 1, 2, 3 or 4. This alsoswitches the mo...
Page 8 - Rear Panel Features
8 Rear Panel Features RS-422/485 Serial Interface The RS-422/485 ports are used to remotely controlthe IMD or all QV171-HDSDI features, using avariety of industry standard protocols. (Note: Connector/pin-out may need to be adapteddepending on protocol and controlling deviceused. See pin-out details ...
Page 9 - Compatible Input Formats; Quad Mode and Layouts
9 Compatible Input Formats The following SDI standards are supported by the QV171-HDSDI: 525i, 625i1035i/60, 1035i/59.941080i/60, 1080i/59.94, 1080i/501080psF/24, 1080psF/23.981080p/24, 1080p/25, 1080p/29.97, 1080p/30720p/60, 720p/59.94, 720p/50 The following VESA standards are supported by the QV17...
Page 11 - STRUCTURE OVERVIEW
11 On-Screen Menu STRUCTURE OVERVIEW Back Return to Main Menu Monochrome Link All Off, On Blue Only Link All Off, On Pixel to Pixel Link All Off, On Aspect Ratio Link All Full, 4:3, Scaled 4:3, 16:9 Curtain Color Link All Blue, Red, Green, White, Black Ctemp/Gamma 55k, 65k, 93k, Linear Framelock Pre...
Page 12 - MAIN MENU AND NAVIGATION; VIDEO CONFIGURATION SUBMENU
12 On-Screen Menu (continued) MAIN MENU AND NAVIGATION Access and navigate the main menu using the RotoMenu ™ knob: Using the RotoMenu knob• Press the RotoMenu ™ knob to enter the main menu. • Rotate the knob to scroll up or down in the main menu or each submenu. • Press the RotoMenu ™ knob to enter...
Page 13 - Monochrome Mode
13 On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Monochrome Mode Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscalepicture. ■ Blue-Only Mode Use this setting to enable Blue-Only mode. This mode displays only the blue co...
Page 14 - Aspect Ratio Settings
14 On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Aspect Ratio Settings Use this menu option to switch between several aspect ratio settings. As the QV171-HDSDI monitor has a native resolution of 1920x1200 RGB pixels, incoming images are automaticallyscaled to fit the screen: •...
Page 15 - Curtain Color; Framelock Preference
15 On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Curtain Color Use this setting to choose the default color displayed on the screen when no video input is present. Available colorsare blue , red , green , white , and black . ■ Ctemp/Gamma Use this setting to choose one of thre...
Page 16 - SYSTEM CONFIGURATION SUBMENU; User-Definable Function Buttons
16 On-Screen Menu (continued) SYSTEM CONFIGURATION SUBMENU Use the System Configuration submenu to control various system parameters. ■ User-Definable Function Buttons Use the Function 1 and Function 2 menu items to define each function button on the front panel of the monitor. The following options...
Page 17 - Saving and Loading User Presets; OSD CONFIGURATION SUBMENU; IMD State
17 On-Screen Menu (continued) SYSTEM CONFIGURATION SUBMENU (continued) ■ Saving and Loading User Presets Use the SAVE CONFIG and LOAD CONFIG menus to save current settings to one of 6 presets, or load a preset. EachPreset saves all monitor settings except for IMD configuration. • Use the LOAD CONFIG...
Page 19 - OSD Tally
19 On-Screen Menu (continued) OSD CONFIGURATION SUBMENU (continued) ■ OSD Tally Use this setting to choose how tally is displayed on the screen. The available OSD Tally options depend on the TallySource selected in the IMD Configuration submenu ( see page 22 ). When the Tally Source is set to Standa...
Page 20 - Audio Monitor; CC
20 On-Screen Menu (continued) OSD CONFIGURATION SUBMENU (continued) ■ Audio Monitor Use the Audio Monitor menu option to enable or disable the audio presence indicator icon. When enabled, this iconindicates whether embedded audio is present in the SDI video input. A red circle and cross will flash o...
Page 21 - IMD CONFIGURATION SUBMENU; Overview
21 On-Screen Menu (continued) IMD CONFIGURATION SUBMENU ■ Overview The QV171-HDSDI features an In-Monitor Display (IMD) with the ability to display on-screen text and tally in threecolors. IMD text, color, and alignment can be assigned to each screen locally using menu options (see below).Alternatel...
Page 22 - IMD Protocol; Tally Source
22 On-Screen Menu (continued) IMD CONFIGURATION SUBMENU (continued) ■ IMD Protocol Use the IMD Protocol menu option to choose the protocol with which the QV171-HDSDI receives remote commands.Currently, four protocols are available. Contact Marshall Electronics for the latest protocol compatibility. ...
Page 23 - IMD Baud Rate; IMD Tally Mode
23 On-Screen Menu (continued) IMD CONFIGURATION SUBMENU (continued) TSL/MEI 422 Use the TSL/MEI 422 setting to control OSD tally via the TSL or Marshall serial protocols. ■ IMD Baud Rate Use this setting to choose the baud rate. The baud rate must be set in conjunction with the controlling device. A...
Page 24 - IMD FIXED SUBMENU; IMD Fixed Color
24 On-Screen Menu (continued) IMD FIXED SUBMENU ■ IMD Fixed Color Use this setting to choose the color of the IMD Fixed String text (see below). Available colors are red , green , and yellow . This setting does not affect text color when using IMD text via the Image Video or TSL v4.0 protocols (text...
Page 25 - SERVICE SUBMENU; Software Version Display
25 On-Screen Menu (continued) SERVICE SUBMENU ■ Software Version Display The Main Board, Keypad, and CPLD software version numbers are displayed. . The following information is displayed: • Rel: Release Package version number • kp Keypad version number • ima A/B Input module version • imc C/D Input ...
Page 26 - Specifications
26 Specifications ■ PANEL Screen Size 17” Diagonal Display Area (h x v) 367.20 x 229.50 mm Aspect Ratio 16:10 Native (4:3/16:9 Modes) Pixels 1920 x RGB x 1200 Color Depth 18-bit Viewing Angle (h x v) 140° x 120° Brightness 400 cd/m 2 Contrast Ratio 600:1 Dot Pitch (h x v) 0.064 x 0.191 mm Pixel Pitc...
Page 27 - Maintenance; Screen Cleaning; Warranty
27 Specifications (continued) Maintenance ■ Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K ). A clean micro- fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels.Paper towel ...
