Mark Levinson NO585POINT5 - User Manual

Page 2 - TABLE OF CONTENTS

2 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL TABLE OF CONTENTS / ABOUT THIS DOCUMENT TABLE OF CONTENTS About This Document 2 Special Design Features 3 Setup Menu 4 Setup Menu Navigation, Input Setup, Volume Control, Power Management, Advanced, Output SSP Setup 10 Troubleshooting 12 Sp...

Page 3 - SPECIAL DESIGN FEATURES

3 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL ENGLISH Thank you for purchasing the N 0 585 integrated amplifier. Combining Mark Levinson’s unsurpassed analog performance with advanced digital audio capability and flexible system configuration, the N 0 585 pushes the reproduction of any...

Page 4 - SETUP MENU; This section explains the use of the Setup menus on your N; SETUP MENU NAVIGATION; Input Setup; Note that Input 5 is reserved for future use.

4 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL SETUP MENU SETUP MENU This section explains the use of the Setup menus on your N 0 585, which allow you to customize and configure the unit. SETUP MENU NAVIGATION Pressing the Setup button displays the Setup menu on the integrated amplifier...

Page 5 - : Setting this to ON activates the Clari-Fi circuitry

5 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL ENGLISH SETUP MENU The following settings are available only for the digital inputs.PCM Filter: This setting lets you set the filter characteristic for PCM content: Fast: This filter has a steep roll-off characteristic that may be better su...

Page 6 - 85‘s Volume and Mute functions.; VOLUME CONTROL

6 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL SETUP MENU The Volume Control settings let you customize the action of the N 0 585‘s Volume and Mute functions. Max Vol: This setting lets you set a maximum Speaker output and Line output volume level setting in 0.1dB increments between 40....

Page 7 - POWER MANAGEMENT; Power Mgmt

7 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL ENGLISH SETUP MENU The Power Management parameters let you customize power-related functions. Standby: This setting lets you set the Standby mode to one of the following options: Green: This mode removes power from almost all of the N 0 585...

Page 8 - ADVANCED

8 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL The Advanced section of the Setup menu gives you access to a range of configuration and administrative settings and functions. Firmware: This menu gives you access to the following firmware-related functions: Ver: Displays the version numbe...

Page 9 - OUTPUT

9 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL ENGLISH The Output section of the Setup menu lets you configure the N 0 585’s outputs. High Pass: This menu allows you to activate a 12dB/octave Butterworth 80Hz high-pass filter on the N 0 585’s speaker outputs. If you have connected a pow...

Page 10 - To connect the N; SSP SETUP

1 0 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL SSP SETUP In the past, the differing number of channels in each component made integration between two-channel and multichannel components difficult. Sending multichannel processor output signals to a stereo Preamplifier distorts calibrat...

Page 12 - NO POWER; TROUBLESHOOTING

1 2 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL TROUBLESHOOTING Incorrect operation is sometimes mistaken for malfunction. If problems occur, see this section for troubleshooting information. If problems persist, contact your authorized Mark Levinson dealer. NO POWER Examine the power ...

Page 13 - AUDIO HAS A HUMMING SOUND

1 3 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL ENGLISH TROUBLESHOOTING AUDIO HAS A HUMMING SOUND Disconnect components one at a time to isolate the problem. Once the problem is identified, make sure the problematic component is properly grounded and connected to the same electrical ci...

Page 14 - SPECIFICATIONS; AMPLIFIER SECTION; PREAMPLIFIER SECTION: ANALOG

1 4 N 0 585 / N 0 585.5 INTEGRATED AMPLIFIER / OWNER’S MANUAL SPECIFICATIONS SPECIFICATIONS AMPLIFIER SECTION Output Power: 200W RMS per channel @ 8 Ω, 20Hz – 20kHz Damping Factor: >400 @ 20Hz, referred to 8 Ω Frequency Response: 20Hz – 20kHz, ±0.13dB; 2Hz – 250kHz, +0.2dB/–3dB Signal-to-Noise Ra...

Mark Levinson NO585POINT5 - User Manual

Table of Contents:

Summary

Other Mark Levinson Amplifiers Models