Page 3 - CE MARKING
CE MARKING English The SR4001/SR5001 is in conformity with the EMC directive and low-voltage direc-tive. Français Le SR4001/SR5001 est conforme à la directive EMC et à la directive sur les basses tensions. Deutsch Das Modell SR4001/SR5001 entspricht den EMC-Richtlinien und den Richtlinien für Nieder...
Page 5 - ENGLISH; TABLE OF CONTENTS; EQUIPMENT MAINS WORKING SETTING; orders; CAUTIONS ON INSTALLATION; INTRODUCTION; MULTI ROOM SYSTEM; II
1 ENGLISH TABLE OF CONTENTS FOREWORD This section must be read before any connection is made to the mains supply. EQUIPMENT MAINS WORKING SETTING Your Marantz product has been prepared to comply with the household power and safety requirements that exist in your area.SR4001/SR5001 can be powered by ...
Page 6 - About Dolby Pro Logic; DESCRIPTION
2 ENGLISH Dolby Pro Logic II x is fully compatible with Dolby Surround Pro Logic technology and can optimally decode the thousands of commercially available Dolby Surround encoded video cassettes and television programs with enhanced depth and spatiality. It can also process any high-quality stereo ...
Page 7 - FEATURES; AM Loop Antenna; User Guide
3 ENGLISH FEATURES T h e S R 4 0 0 1 / S R 5 0 0 1 i n c o r p o r a t e s t h e l a t e s t generation of digital surround sound decoding technology such as Dolby Digital EX, Dolby Digital, DTS-ES (Discrete 6.1 and Matrix 6.1), DTS Neo:6 (Cinema, Music), Dolby Pro-Logic II x (Movie, Music and Game)...
Page 8 - • The surround mode is automatically switched to; FRONT PANEL; q w
4 ENGLISH t INFRARED receiving sensor window This window receives infrared signals for the remote control. y SURROUND MODE button You can select the surround mode by pressing this button. u PURE DIRECT button and indicator When this button is pressed once, “ SOURCE DIRECT ” appears on the FL display...
Page 9 - ATT; ” is displayed; EQ; ” indicator lights up.
5 ENGLISH !2 VOLUME control knob Adjusts the overall sound level. Turning the control clockwise increases the sound level. !3 ATT (Attenuate) button If the selected analog audio input signal is greater than the capable level of internal processing, the PEAK indicator will illuminate. If this happens...
Page 10 - FL DISPLAY; HOW TO ATTACH THE FRONT AUX JACK COVER; Front AUX Jack Cover
6 ENGLISH FL DISPLAY DISP MULTI AUT O TUNED ST V – OFF NIGHT PEAK ANALOG DIGITAL A T T SLEEP SURR AUTO DIRECT DISC 6.1 MT X 6.1 SPKR B EQ DIGITAL SURROUND P CM L C R SL S SR LFE ¡8 ¡7 g s a ¡6 ™0 ¡9 h k ¡0 ¡2 ¡4 f j l ¡1 ¡3 ¡5 d a DISP (Display Off) indicator This indicator is illuminated when the S...
Page 11 - REAR PANEL; • In order to avoid potential turn-off thumps, anything
7 ENGLISH REAR PANEL SR4001 R R SR SR C C SW SW SBR SBR SL SL SBL SBL L L R R SPEAKER SYSTEMS : 6-8 OHMS SPEAKER SYSTEMS : 6-8 OHMS CENTER CENTER R R FRONT FRONT SURROUND BACK SURROUND BACK S. SPEAKER B S. SPEAKER B SURROUND SURROUND L L L L L L R R COAX COAX IN IN OUT OUT RC-5 RC-5 2 2 1 1 4 4 3 3 ...
Page 13 - NIGHT; PTY button; FUNCTION AND OPERATION; POWER
9 ENGLISH 9/NIGHT button Pressing this button prevents the Dolby Digital signal from playback at a loud voice. This function reduces the voice by 1/3 to 1/4 at maximum. Thus, it eliminates the occurrence of an abruptly loud voice at night. However, the function is valid only in the case when the Dol...
Page 15 - OPERATION OF REMOTE CONTROL UNIT; REMOTE CONTROL; Remote-controllable range; LOADING BATTERIES; • Do not mix alkaline and manganese batteries.; CAUTIONS ON BATTERIES
11 ENGLISH OPERATION OF REMOTE CONTROL UNIT REMOTE CONTROL The distance between the transmitter of the remote control and the IR SENSOR of the SR4001/SR5001 should be less than 5 meters. If the remote control is pointed in a direction other than the IR SENSOR or if there is an obstacle between them,...
Page 16 - SOURCE; button. Please refer below for the details in AMP and TUNER mode.; AMP MODE; TUNER MODE
12 ENGLISH GENERAL INFORMATION OF RC5001SR TO SR4001/SR5001 To control the SR4001/SR5001 by your RC5001SR, you have to select the device AMP or TUNER by pressing the SOURCE button. Please refer below for the details in AMP and TUNER mode. AMP MODE CAT P.SCAN CAT T.MODE - T.DISP F.DIRECT PTY TUNING P...
Page 17 - CONTROLLING MARANTZ COMPONENTS; Press the desired; CONTROLLING A MARANTZ DVD PLAYER (DVD MODE)
13 ENGLISH CONTROLLING MARANTZ COMPONENTS 1. Press the desired SOURCE button. 2. Press the desired operation buttons to play the selected component. • For details, refer to the component’s user guide.• It may not be possible to operate some models. CONTROLLING A MARANTZ DVD PLAYER (DVD MODE) CONTROL...
Page 18 - CONTROLLING A MARANTZ CD RECORDER (CDR MODE)
14 ENGLISH CONTROLLING A MARANTZ CD RECORDER (CDR MODE) SOURCE ON / OFF Turns the CD recorder on and offPOWER OFF Turns the CD recorder off POWER ON Turns the CD recorder on 0-9 Inputs the numeric CL Clears the inputting MEMO Programs INFO Scrolls the disc information MENU Switches the display infor...
Page 19 - After this procedure, the selected; button is; BASIC OPERATION; (When operating Marantz AV equipment products)
15 ENGLISH RESETTING THE CODE 1 2 3 SEND INPUT dts P.DIRECT OFF ON SET AUTO SURROUND SLEEP DISPLAY LEARN LIP SYNC/ l/ SOURCE 1. CAT P.SCAN CAT T.MODE 1 2 3 4 5 6 7 8 9 0 +10 HT-EQ MULTI/ SEND MENU SPKR A/B INFO CH/ INPUT M-SPKR MUTE EX/ES VIRTUAL CS VOLUME dts P.DIRECT OFF ON SET 7.1CH IN STEREO NIG...
Page 20 - LEARN MODE; • This remote control is capable to learn around 60; LEARNING PROCEDURE; • When the SEND indicator blinks once again, the; Erasing the code by SOURCE; Erasing the all SOURCES
16 ENGLISH LEARN MODE This remote control is capable of learning and storing codes used by other remote controls that you already own.For codes which are not learned, the remote control will transmit either the Marantz preset codes from the initial settings, or remote codes from another manufacturer...
Page 21 - CONNECTIONS; SPEAKER PLACEMENT; HEIGHT OF THE SPEAKER UNITS; CONNECTING SPEAKERS; CONNECTING SPEAKER WIRE; Twist the bared wire ends tight, to prevent short
17 ENGLISH CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround back left and right speakers, and a subwoofer.For best results we recommend that all fron...
Page 22 - CONNECTING A SUBWOOFER; CONNECTING AUDIO COMPONENTS; CONNECTING DIGITAL AUDIO COMPONENTS; • There are 4 digital inputs, 2 coaxial jacks and; CD recorder
18 ENGLISH Caution: • Be sure to use speakers with the specifi ed impedance as shown on the rear panel of this unit. • To prevent damage to circuitry, do not let the bare speaker wires touch each other and do not let them t o u c h a n y m e t a l part of this unit. • Do not touch the speaker termin...
Page 23 - CONNECTING VIDEO COMPONENTS; There are 3 types of video jacks on the rear panel.
19 ENGLISH CONNECTING VIDEO COMPONENTS VIDEO, S-VIDEO , COMPONENT JACKS There are 3 types of video jacks on the rear panel. VIDEO jack T h e v i d e o s i g n a l f o r t h e V I D E O j a c k s i s t h e conventional composite video signal. S-VIDEO jack The video signal is separated into luminance ...
Page 24 - ADVANCED CONNECTING; CONNECTING MULTI CHANNEL AUDIO SOURCE; CONNECTING THE REMOTE CONTROL JACKS; MENU
20 ENGLISH ADVANCED CONNECTING RS-232C SPEAKER C OFF ON R SR C SW SBR SL SBL L (AUX2) 7.1CH INPUT L SL C SBL R SR SW SBR R L FM (75 Ω ) GND AM ANTENNA VC DVD TV IN TV DVD VCR IN S-VIDEO VIDEO PRE OUT MULTI. OUT R L FRONT A OR B.CENTERSURR.SURR BACK : 6-8 FRONT A + B : 8 OHMS FRONT B R SR C SW SBR SL...
Page 25 - CONNECTING THE ANTENNA TERMINALS; ASSEMBLING THE AM LOOP ANTENNA; Connecting the supplied FM antenna; CONNECTING AN FM OUTDOOR ANTENNA
21 ENGLISH CONNECTING THE ANTENNA TERMINALS ASSEMBLING THE AM LOOP ANTENNA 1. Release the vinyl tie and take out the connection line. 2. Bend the base part in the reverse direction. 3. Insert the hook at the bottom of the loop part into the slot at the base part. CONNECTING THE SUPPLIED ANTENNAS Con...
Page 26 - CONNECTING FOR THE MULTI ROOM (SR5001 only); MULTIROOM; CONNECTING FOR SPEAKER C USE (SR5001 only); • If incorrectly connected, a protective circuit in the
22 ENGLISH CONNECTING FOR THE MULTI ROOM (SR5001 only) O DIGITA 3 RS-232C SPEAKER C OFF ON R SR C SW SBR SL SBL L CO 1 4 3 (AUX2) 7.1CH INPUT L SL C SBL R SR SW SBR R L FM (75 Ω ) GND AM CR / PR CB / PB Y ANTENNA OUT IN CDR/MD OUT IN TAPE CD VCR1 DVD TV AUDIO DSS/VCR2 IN IN OUT CR / PR CB / PB Y DSS...
Page 27 - HDMI JACK; DVD player; Satellite Tuner
23 ENGLISH HDMI JACK This unit has two HDMI inputs and one HDMI output. It can send digital video and audio signals from DVDs and other sources directly to a display. It minimizes signal degradation caused by analog conversion so that high quality images can be enjoyed. Select an input source from t...
Page 28 - SETUP; ON SCREEN DISPLAY MENU SYSTEM
24 ENGLISH SETUP After all components are connected, initial setup must be performed. ON SCREEN DISPLAY MENU SYSTEM The SR4001/SR5001 incorporates an on-screen menu system, which makes various operations possible by using the cursor ( 3 , 4 , 1 , 2 ) and ENTER buttons on the remote control or on the...
Page 29 - DIG; SPEAKER SETUP; CENTER
25 ENGLISH 1 INPUT SETUP (ASSIGNABLE DIGITAL INPUT AND COMPONENT VIDEO INPUT) 4 digital inputs and 2 component video inputs can be assigned to a desired source.Use this menu to select the digital input jack to be assigned to the input source. 1. S e l e c t “ I N P U T S E T U P ” i n S E T U P M A ...
Page 30 - -2 SPEAKERS DISTANCE; NONE; -3. SPEAKERS LEVEL SETTING WITH TEST TONE; PREFERENCE; ECONOMY
26 ENGLISH 2-2 SPEAKERS DISTANCE Use this parameter to specify the distance of each speaker’s position from the listening position. The delay time is automatically calculated according to these distances.Begin by determining the ideal or most commonly used seating position in the room.This is import...
Page 31 - SURROUND
27 ENGLISH 6 CS II (CIRCLE SURROUND II ) PARAMETER 6 CS II PARAMETER TRUBASS : 0SRS DIALOG : 0 MAIN EXIT 1. Select “ CS II ” in the SETUP MAIN MENU with the 3 or 4 cursor buttons, and press the ENTER button. 2. To Select desired contents as below, press the 3 or 4 cursor buttons. TRUBASS: Set the TR...
Page 32 - 7.1 CH INPUT LEVEL
28 ENGLISH 8 MULTI ROOM (SR5001 only) SR5001 has features in MULTI ROOM SYSTEM such as source selector, sleep timer, Multi Room Speaker output and remote control.You can set these feature in this sub-menu. 8 MULTI ROOM AUDIO : DVDSLEEP TIMER : OFFMULTI:OUT : STEREOMULTI:OFF MSPK :VOL : VARILEVEL : -...
Page 33 - SIMPLE SETUP; SIMPLE SETUP; The relation of the room size and fl oor space
29 ENGLISH SIMPLE SETUP You can setup the speaker conditions quickly with SIMPLE SETUP menu. In this menu, the number of speakers and speaker delay time can be set. These settings can be changed more detail in “2. SPEAKER” setup menu.Press the SIMPLE SETUP button on the unit to enter this menu. MULT...
Page 34 - VIDEO CONVERT; SELECTING AN INPUT SOURCE; HDMI
30 ENGLISH SR4001/SR5001 MULTI SPEAKER DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO SETUP SIMPLE MULTI PURE T-MODE SURROUND MEMORY DISPLAY ATT MUTE STANDBY PHONES POWER ON/OFF INPUT SELECTOR VOLUME UP DOWN AV SURROUND RECEIVER SR5001 DIRECT AUTO HT-EQ EXIT MENU MODE BAND CLEAR ENTER VIDEO or S-VIDEO ...
Page 35 - USING THE SLEEP TIMER; NIGHT MODE; Example: AUTO SURROUND; ADJUSTING THE MAIN VOLUME; • The volume can be adjusted within the range of –
31 ENGLISH USING THE SLEEP TIMER T.MODE 1 2 3 4 5 6 SEND INPUT EX/ES VIRTUAL CS dts P.DIRECT l/ OFF ON SET AUTO SURROUND DISPLAY LEARN LIP SYNC/ SOURCE SLEEP SLEEP To program the SR4001/SR5001 for automatic standby, press the SLEEP button on the remote. Each press of the button will increase the tim...
Page 36 - SURROUND MODE; AUTO; x movie processing before play.; MODE; dts MODE; : This mode is enabled when playing source; CIRCLE SURROUND; mode or
32 ENGLISH SURROUND MODE T h e S R 4 0 0 1 / S R 5 0 0 1 i s e q u i p p e d w i t h m a n y surround modes. These are provided to reproduce a variety of surround sound effects, according to the content of the source to be played.The available surround modes may be restricted depending on the input ...
Page 37 - VIRTUAL; • When you use this mode with certain DVD and CD; PURE DIRECT; NOTE for DTS signal
33 ENGLISH CS II -Mono mode This mode plays back monaural recordings from any source, including CDs, DVDs and TV and radio broadcasts in compelling 6.1-channel surround. Notes: • CS II mode is available for 2ch input signals which are encoded in Dolby Digital or PCM format. • PCM-audio signals can b...
Page 38 - Surround fl ag Speakers are full set.
34 ENGLISH The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector on SR4001/SR5001 or the remote control unit. However, the sound you hear is subject to the relationship between the selected surround mode and input signal. T...
Page 39 - OTHER FUNCTION; TV AUTO ON/OFF FUNCTION; AUTO POWER ON; ATTENUATION TO ANALOG INPUT SIGNAL; LISTENING THROUGH HEADPHONES; DOLBY HEADPHONE MODE; DISPLAY MODE
35 ENGLISH OTHER FUNCTION TV AUTO ON/OFF FUNCTION This function allows the component connected to the TV-VIDEO in jack to control the power (ON/OFF) to the SR4001/SR5001. AUTO POWER ON 1. Be sure the TV auto mode is ENABLED. (Refer page 26 : System Setup) 2. Connect your TV TUNER (etc) to the TV- VI...
Page 40 - RECORDING AN ANALOG SOURCE; • If you change the input source during recording, you
36 ENGLISH 7.1 CH INPUT T h e S R 4 0 0 1 / S R 5 0 0 1 i s e q u i p p e d f o r f u t u r e expansion through the use of Multi channel SACD multichannel player or DVD-Audio player.When this is selected, the input signals connected to the L(front left), R (front right), CENTER, SL (surround left), ...
Page 41 - AUX2 INPUT; LISTENING TO THE TUNER; AUTO TUNING; MANUAL TUNING; DIRECT FREQUENCY CALL; • In addition, there is no signal at the record outputs
37 ENGLISH AUX2 INPUT If you don’t need to connect 7.1 Ch. input terminals with multi channel decoder,L(front left) and R (front right) inputs terminals are available as AUX2 input.In this case, You can connect additional audio source to AUX2 as other audio input terminals. MULTI SPEAKER SETU SIMP M...
Page 42 - CLEARING STORED PRESET STATIONS; To clear all stored preset stations, press and hold the; CLEAR; and the; buttons for two seconds.; RECALLING A PRESET STATION; PRESET SCAN; MANUAL PRESET MEMORY; PRESET MEMORY; AUTO PRESET MEMORY
38 ENGLISH (Using the remote control unit) 1. Press the P.SCAN on the remote. “ PRESET SCAN ” appears on the display and then the preset station with the lowest preset number is recalled fi rst. 2. Preset stations are recalled in sequence (No.1 → No.2 → etc.) for 5 seconds each. No stored preset num...
Page 43 - SORTING PRESET STATIONS; NAME INPUT OF THE PRESET STATION.; Unused columns should be fi lled by entering blanks.; Ten keypad; RDS OPERATION; RADIO TEXT; PTY AUTO SEARCH
39 ENGLISH SORTING PRESET STATIONS MULTI SPEAKER DIGITAL R L VIDEO S-VIDEO AUX 1 INPUT AUDIO SETUP SIMPLE MULTI PURE T-MODE SURROUND MEMORY DISPLAY ATT MUTE STANDBY PHONES POWER ON/OFF INPUT SELECTOR VOLUME UP DOWN AV SURROUND RECEIVER SR5001 DIRECT AUTO HT-EQ EXIT MENU MODE BAND CLEAR ENTER If you ...
Page 44 - Notes for MULTI ROOM SPEAKER; MULTI SPEAKER
40 ENGLISH MULTI ROOM SYSTEM (SR5001 only) The Multi Room system is a function which allows you to listen to the same or a different source in a room other than the room in which the SR5001 is located. To use this function, a multi room remote unit and remote control signal receiver available from y...
Page 45 - Press the; SPKR B; ” will appear on the display.
41 ENGLISH SURROUND SPEAKER B SYSTEM (SR4001 only) The Surround Speaker B system is a function which allows you to listen to the same source in a room other than the room in which the SR4001 is located.The operations possible with the Surround speaker function are explained briefl y below. ANOTHER R...
Page 46 - TROUBLESHOOTING; Are the connections made properly ?
42 ENGLISH TROUBLESHOOTING In case of trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following the user’s guide ? 3. Are the power amplifi ers and speaker working properly ? If the unit does not operate properly,...
Page 47 - FM TUNER SECTION; DIMENSIONS; GENERAL MALFUNCTION; Memory backup; HOW TO RESET THE UNIT; I N P U T; VIDEO
43 ENGLISH TECHNICAL SPECIFICATIONS FM TUNER SECTION Frequency Range ................................ 87.5 – 108.0 MHz Usable Sensitivity ............................ IHF 1.8 µV/16.4 dBf Signal to Noise Ratio ................... Mono/Stereo 75/70 dB Distortion ......................................M...
Page 48 - SETUP CODES; TV
SETUP CODES TV Acer .......................................................... 1141Admiral .................................1002, 1009, 1089Aiko .......................................................... 1059Aiwa ................................................. 1117, 1118Akai .........................
Page 49 - ii
Dimensia ..............................3004, 3063, 3085Dixon .............................................. 3077, 3081Dynatech .................................................. 3035Electrohome ............................................. 3052Electrophonic .............................................
Page 50 - iii
Hughes ........................................... 4001, 4016Janeil ........................................................ 4025JVC ........................................................... 4017Mitsubishi ................................................. 4001Panasonic ...............................
Page 51 - a re; Printed in China
www.marantz.com Yo u ca n fi n d yo u r n eare s t a u thorized di s trib u tor or dealer o n o u r web s ite. i s a re g i s tered trademark. 06/2006 00M03CW851310 ecmf-e Printed in China
