Marantz RC2001 - Manual - manualsarea.com

Page 2 - D E C L A R AT I O N O F C O N F O R M I T Y

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can r...

Page 3 - ENGLISH; CHECKING THE ACCESSORIES; FEATURES

1 ENGLISH Thank you for purchasing the Marantz RC2001 remote controller. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you operate the RC2001. CHECKING THE ACCESSORIES After open...

Page 4 - BEFORE USE; LOADING BATTERIES; CAUTION ON BATTERY

2 ENGLISH BEFORE USE LOADING BATTERIES Before using the remote controller for the fi rst time, load the batteries in the remote controller. The batteries provided are used to verify the operations of the remote controller only. Note: The settings remain saved in the remote controller even if the pow...

Page 6 - NAMES AND FUNCTIONS

4 ENGLISH NAMES AND FUNCTIONS q POWER ON and OFF buttons These buttons are used when controlling devices that have been set with separately powered on and off remote commands. w SOURCE ON/OFF button This button is used when controlling devices that have been set with a single power on/off remote com...

Page 8 - BASIC OPERATION; SLEEP TIMER

6 ENGLISH BASIC OPERATION RC2001 BUTTON SETTINGS The Wizz.it 3 editor software can be used to make the settings for the IR Command, LINK, JUMP, One Touch Operation (Macro) and other functions in the RC2001.This enables a customized user interface, optimized for the customer ʼ s environment, to be bu...

Page 9 - OTHER OPERATION; MAIN MENU; ENTERING THE MAIN MENU

7 ENGLISH OTHER OPERATION MAIN MENU The various settings for the remote device are made in the main menu. ENTERING THE MAIN MENU 1. Press the Home button to enter Home mode for the RC2001. 2. Hold down the Home button and Menu button at the same time for three seconds to display MAIN MENU on the LCD...

Page 11 - CHECKING THE SETTINGS

9 ENGLISH 2. TIMER The timer function of the RC2001 can be used to send a preset remote controller command at a programmed time.The Wizz.it 3 editor can be used to operate multiple devices. One Touch Operation (Macro) can also use the timer function for transmission. CHECKING THE SETTINGS 1. Display...

Page 13 - OPERATION ON/OFF SETTINGS

11 ENGLISH OPERATION ON/OFF SETTINGS 1. Press the button next to the “ ON/OFF ” indicator in the TIMER menu screen on the LCD to display the timer operation ON/OFF setting screen. 2. P r e s s t h e bu t t o n n ex t t o t h e “ T I M E R ON ” (Enable) or “ TIMER OFF ” (Disable) indicators on the LC...

Page 19 - CHECKING THE STATUS; PROGRAMMABLE CODES; NUMBER OF PROGRAMMABLE CODES

17 ENGLISH 4. STATUS INDICATOR This displays the settings made in the MAIN MENU and the status of the remote device. CHECKING THE STATUS 1. Display the MAIN MENU on the LCD of the RC2001, then press the button next to the “ STATUS ” indicator. 2. Pressing the ENTER button cycles through the statuses...

Page 21 - REPAIRS

19 ENGLISH OTHERS The section describes the care and maintenance tasks that must be performed to optimize the operation of your Marantz component. CLEANING OF EQUIPMENT EXTERNAL SURFACES The exterior fi nish of your unit will last indefi nitely w i t h p r o p e r c a r e a n d c l e a n i n g , N e...

Page 22 - is a registered trademark.

Printed in China 10/ 2007 00M42CW851250 mzh-d www.marantz.com You can find your nearest authorized distributor or dealer on our website. is a registered trademark. RC2001̲E̲cover.indd 2 RC2001̲E̲cover.indd 2 07.10.11 1:03:12 PM 07.10.11 1:03:12 PM

Marantz RC2001 - Manual

Table of Contents:

Summary

Other Marantz Models