MantelMount MM750 - User Manual
MantelMount MM750 TV Bracket – User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Required Tools; understand and identify all of the components.
- Page 3 – MAXIMUM; STUDS; larger than 50”; VESA; PAGE 3; This is not an installation step, only a verification.
- Page 4 – Flat Back; Spacers; to Flange edge
- Page 5 – Use this distance in Step 9; PAGE 5
- Page 6 – PAGE 6; M A N T E L
- Page 7 – PAGE 7; Installation Options: Surface Mount
- Page 8 – Cutting a Center Stud:; PAGE 8
- Page 9 – THIS STEP REQUIRES TWO PEOPLE; Distance from; CL; Marking the Location for the Lift Housing {30}; PAGE 9
- Page 10 – MantelMount MM750; ONLY WITH
- Page 11 – PAGE 11
- Page 12 – Adjusting the Hard Stops for Range of Motion:
- Page 15 – PAGE 15
- Page 16 – Full Manufacturer Warranty:; MantelMount will replace or repair any product or part; Exclusive MantelMount Features!
MM750 Installation Instructions
Please read this entire manual before you begin.
Do not unpack any contents until you verify all requirements on PAGE 3.
If you have any questions, visit MantelMount.com or call
(800)-897-9755.
This product contains small parts that can be a
choking hazard.
Do not
let children play with any of
these small parts! Keep children away from the work
area during installation.
Do not use this product in any way, or for any
purpose, that is not specifically described in these
instructions. MantelMount is not responsible for
damage or injury caused by incorrect installation
or improper use.
MantelMount has three different adjustments
that must be made after the installation is
complete in order to operate properly.
IMPORTANT:
This product is intended to be installed by
professional installation contractors, or persons
familiar with the tools and methods required for
this installation. If you are not sure about your
ability to perform this installation, you must
contact a professional. MantelMount is not
responsible for damage or injury caused by
incorrect installation or improper use.
!
CAUTION:
!
CAUTION:
!
WARNING!
Do not let small children operate, pull on, or hang from
MantelMount.
Do not operate MantelMount when anyone is near or
behind the mount. MantelMount is very strong and can
result in crushing injuries.
!
WARNING!
!
WARNING!
Exceeding the weight capacity can result in
serious personal injury or damage to equipment!
The combined weight of all components must not
exceed 110 lbs (50 kg).
MantelMount must be installed to a wall or structure
that is able to hold five times the combined weight of
all equipment. If you are unsure about your structure,
a contractor must evaluate your installation.
!
WARNING!
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS
MantelMount MM750
PAGE 1
www.MantelMount.com
The bottom travel stop is adjusted
with two screws and locknuts so
the TV and mount do not lower all
the way into the mantel.
Tilt is removed with one screw
inside the swivel mechanism. The
TV should always be vertically
parallel to the wall
The side-to-side swivel stops are
adjusted with two screws and
locknuts so that the TV does not
swivel into the mantel.
U.S. Pat. No. 8,864,092
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
PAGE 2 MantelMount MM750 Required Tools 7/32” 10-14mm 4-5mm Before you begin, please verify that all components are included and undamaged. If any parts are missing or damaged, contact MantelMount. Never proceed with missing or damaged parts! Lay out all components and make sure you identify that ea...
MantelMount is designed for use only with decorative fireplaces that are not the primary heat source for a house. Temperature at the front edge of mantle should never exceed 110° F. A B C E D Mantle must not extend from mounting surface more than 19 inches (22 inches for non-recessed installations)....
Use a Vertical Brace {27} to determine if your television is a flat back or an irregular back. An irregular back will require spacers and longer screws to fill any spaces between the Vertical Brace and the TV. The Braces must be parallel to your television screen. Choose the correct screw diameter a...
