Manitowoc MDB-290 - Manual
Manitowoc MDB-290 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
MDB-290 WATERPROOF SWITCH/ACTUATING ARM
REPLACEMENT KIT
Installation Instructions
A.
Disconnect power to dispenser.
B.
Remove top panel.
C.
Remove front panel. Wing nuts on inside of ice chute
must be loosened to pull front panel away from dispenser.
D.
Remove drip switch guard. Note: Mounting screws also
hold activating arm.
E.
Remove switch box and gasket. Disconnect leads.
F.
Lead wire terminals must be removed and butt connectors
in the kit attached.
G.
Lead wires in conduit will require connection to micro
switch. Existing eyelet terminals to be cut off - strip
wires 5/16” for attaching butt connectors (item 9) to lead
wires of switch. Note: A 90
conduit connector might be
required to insure the conduit is long enough to reach the
new switch box on some machines. 90
conduit
connector not furnished with this kit.
H.
Attach mylar screen assembly with double-face tape.
I.
Attach new spring loaded activating arm assembly.
J.
Adjust switch by sliding switch bracket forward or
backward while activating the dispensing arm until the
switch is positioned so that it makes (closes) just before
the arm bottoms out against the front panel. This will
assure that undue pressure is not put on the switch.
The MDB-290 Waterproof Switch/Actuating Arm Replacement Kit includes:
Item Qty. Description
Part Number
1
1
Waterproof Switch/Bracket Assy.
7623283
2
1
Pivot Block/Actuating Arm Assy.
7623293
3
1
Switch Box
6595814
4
1
Mylar Screen Assy.
6192114
5
1
Pin
5013183
6
1
Bushing
2500143
7
2
#8-32 Hex Nut
5429061
8
2
Lock Washer
5544591
9
4
Flat Washer
5504261
10
1
Poly Bag
7200631
11
1
Padded Bag
7201093
12
1
Installation Instructions
8003803
If this switch is being installed on a dispenser that does not
have a mechanical or mercury relay to carry the gear motor
load, a relay of sufficient size must be added. Note: This
switch is not rated for gear motor amps.
Note: If switch replacement is required after the installation
of this kit, order Waterproof Switch/Bracket Assy.,
7623283.
Manitowoc Ice, Inc.
2110 South 26 Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA
Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879 8003803
Web Site -
www.manitowocice.com
Rev. 01/13/00
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
