Makita LS1016 - Manual
Makita LS1016 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 3 – epair; Arm section
- Page 4 – Upper fence
- Page 6 – Guard section
- Page 7 – notch A
- Page 25 – M10x20 Hex flange head bolt
- Page 26 – Cut 35mm length
- Page 27 – Laser section exclusively for LS1016L; 20-240V area where Radio interference suppression is required
- Page 32 – Wiring around Case of LS1016L; Case; Inside of Case; Circuit plate; Bottom view of Handle; Handle; iring diagram
- Page 33 – Controller
- Page 34 – where Radio Interference suppression is not required.
- Page 36 – Wiring in Motor housing and Handle for UK 110V; Wiring on Line filter
- Page 37 – Wiring of Laser circuit complete of LS1016L for all countries; [Laser circuit section viewed from front side]
PRODUCT
P 1/
37
Models No.
Description
C
ONCEPT AND MAIN APPLICATIONS
S
pecification
LS1016, LS1016L
Slide Compound Miter Saw 255mm (10")
*1
/ 260mm (10-1/4")
[*1 255mm (1") for North America]
LS1016 and LS1016L are upgraded sister tools of LS1013 series models,
featuring DXT (Deep eXact cutting Technology) achieved by our consistent
pursuit of cutting larger size workpiece but with higher accuracy.
The features and benefits of DXT are:
Deep cutting
3-Stage reduction gear unit and Movable rear blade guard provide
larger capacities of cutting Crown molding and Baseboard (Skirt board)
which are typical workpieces of slide compound miter saws.
eXact cutting
Precise and exact cutting obtained by employing:
Double sliding mechanism
Double sliding guide fence
Quick and accurate miter angle lock, etc
LS1016L additionally features laser marker for easy cut line alignment.
T
ECHNICAL INFORMATION
No load speed: min-
1
= rpm
Double insulation
Diameter
Hole diameter
Protection against electric shock
Cord length: m (ft)
Net weight*3: kg (lbs)
Lock-off switch
Electric brake
Electronic
control
Soft start
Constant speed
Saw blade:
mm (")
Yes
Yes
Yes
Yes
Laser marker
Yes
No
3,200
250 (9-7/8) - 260 (10-1/4)
European countries: 30, North America: 15.88 (5/8), Other countries: 25.4 (1)
2.5 (8.2)
23.6 (52.0)
23.7 (52.2)
Net weight*2: kg (lbs)
24.1 (53.1)
24.2 (53.3)
S
tandard equipment
O
ptional accessories
Note: The standard equipment for the tool shown may differ by country.
Vertical vise ............................... 1
TCT saw blade .......................... 1
Dust bag .................................... 1
Socket wrench 13 ....................... 1
Triangular rule ........................... 1
Spare lock-off button .................. 2
Holder set ................................... 2 (all countries except North America)
Hex wrench ................................ 1 (LS1016L only)
Horizontal vise
Dust box
TCT saw blades
Portable miter saw stand
Crown molding stopper set
Dimensions: mm (")
Width (W)
Height (H)
Length (L)
718 (28-1/4)
671 (26-1/2)
640 (25-1/4)
W
L
H
120
110
220
230
240
15
1,510
---
900
2,600
50/60
7.2
1,510
800
2,000
50/60
6.9
1,510
800
2,000
50/60
6.6
1,510
800
2,000
50/60
15
900
2,600
50/60
Continuous Rating (W)
Voltage (V)
Cycle (Hz)
Input
Output
Max. Output (W)
Current (A)
*2 Weight according to EPTA-Procedure 01/2003, with
TCT
saw blade and "Blocking mechanism at the rest position"
*3 With TCT saw blade, without "Blocking mechanism at the rest position"
See next page for the cutting capacities.
Model No.
LS1016
LS1016L
Specification
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
P 3/ 37 R epair CAUTION: Unplug the tool and remove the saw blade from the machine for safety before repair/ maintenance in accordance with the instruction manual! [1] NECESSARY REPAIRING TOOLS [2] LUBRICATIONS Code No. Description Use for 1R028 Bearing setting pipe 20-12.2 Mounting Retaining ring S...
[2] LUBRICATIONS (cont.) Fig. 2 Item No. Apply Makita grease SG.No.00 to the following portions designated with the black triangle to protect partsand product from unusual abrasion. Description Portion to lubricate Center washer 4x16 Tapping screw Center plate Center cover Safety cover A complete To...
[3] DISASSEMBLY/ASSEMBLY[3]-1. Blade case, Motor section DISASSEMBLING Remove Strain reliefs from Arm complete andBlade case by unscrewing 4x12 Tapping screw(2pcs.). Link platecomplete Remove Link plate as illustrated below. Blade case Fig. 8 Fig. 7 Fig. 9 1. Remove Stop ring E-5, Flat washer 6 and ...
