Makita HPR2410 - Manual - manualsarea.com

Page 2 - SPECIFICATIONS; GENERAL SAFETY RULES; Read and understand all instructions.; Failure to follow all; SAVE THESE INSTRUCTIONS; Work Area

2 SPECIFICATIONS • Manufacturer reserves the right to change specifications without notice. • Specifications may differ from country to country. GENERAL SAFETY RULES USA002-2 (For All Tools) WARNING: Read and understand all instructions. Failure to follow all instructions listed below, may result in...

Page 4 - SPECIFIC SAFETY RULES

4 21. Check for misalignment or binding ofmoving parts, breakage of parts, and anyother condition that may affect the toolsoperation. If damaged, have the tool ser-viced before using. Many accidents are caused by poorly maintained tools. 22. Use only accessories that are recom-mended by the manufact...

Page 6 - Selecting the action mode

6 FUNCTIONAL DESCRIPTION CAUTION: • Always be sure that the tool is switched off andunplugged before adjusting or checking function on thetool. Switch action CAUTION: • Before plugging in the tool, always check to see that theswitch trigger actuates properly and returns to the “OFF”position when rel...

Page 7 - Torque limiter; ASSEMBLY

7 Torque limiter The torque limiter will actuate when a certain torque level isreached. The motor will disengage from the output shaft.When this happens, the bit will stop turning. CAUTION: • As soon as the torque limiter actuates, switch off the toolimmediately. This will help prevent premature wea...

Page 9 - OPERATION; Hammer drilling operation

9 Dust cup (optional accessory) Use the dust cup to prevent dust from falling over the tooland on yourself when performing overhead drilling opera-tions. Attach the dust cup to the bit as shown in the figure.The size of bits which the dust cup can be attached to is asfollows. OPERATION Hammer drilli...

Page 10 - Drilling in wood or metal; MAINTENANCE

10 Drilling in wood or metal Use the optional drill chuck assembly. When installing it, referto “Installing or removing the bit” described on the previouspage. Set the action mode changing knob to “rotation only”. You can drill up to 13 mm (1/2”) diameter in metal and up to32 mm (1-1/4”) diameter in...

Page 11 - ACCESSORIES

11 ACCESSORIES CAUTION: • These accessories or attachments are recommended foruse with your Makita tool specified in this manual. Theuse of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose. If you need any assistanc...

Page 12 - Memo

Page 14 - Your answers to the following questions are appreciated.; Certificate of Warranty

14 Your answers to the following questions are appreciated. Date Purchased Model No. Serial No. Initial Last Name Street Address City Province AGE: Male Female Married Single Month Day Year 20 Under 19 20-29 30-39 40-49 Over 50 Paste Paste Paste Paste Paste Paste Paste Paste P aste P aste P aste P a...

Page 15 - Factory Service Centres; CUSTOMER RECORD

15 Factory Service Centres For the authorized service centre nearest you please refer to the local yellow pages directory under “tools” or con-tact our customer service department (Tel) 1-800-263-3734 When you need service... • Explain the problem in a letter • Enclose the letter with the tool • Pac...

Page 16 - Warranty Policy; MAKITA LIMITED ONE YEAR WARRANTY; Makita Corporation

Warranty Policy Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to be free of defects fromworkmanship and materials for the period of ONE YEAR from the date of original purchase. Should any trouble develop duringthis one year period, return the COMPLE...

Makita HPR2410 - Manual

Table of Contents:

Summary

Other Makita Models