Makita BHR200 - Manual - manualsarea.com

Page 2 - SPECIFICATIONS; Symbols; Intended use; Wear ear protection

2 ENGLISH (Original instructions) SPECIFICATIONS Model BHR200 Concrete 20 mm Steel 13 mm Capacities Wood 27 mm No load speed (min -1 ) 0 - 1,100 Blows per minute 0 - 4,700 Overall length 316 mm Net weight 3.8 kg Rated voltage D.C. 24 V • Due to our continuing programme of research and development, t...

Page 3 - EC Declaration of Conformity

3 ENH101-14 For European countries only EC Declaration of Conformity We Makita Corporation as the responsible manufacturer declare that the following Makita machine(s): Designation of Machine: Cordless Rotary Hammer Model No./ Type: BHR200 are of series production and Conforms to the following Europ...

Page 5 - Do not disassemble battery cartridge.; SAVE THESE INSTRUCTIONS.; Tips for maintaining maximum battery life; FUNCTIONAL DESCRIPTION; Installing or removing battery cartridge

5 11. Do not leave the tool running. Operate the tool only when hand-held. 12. Do not point the tool at any one in the area when operating. The bit could fly out and injure someone seriously. 13. Do not touch the bit or parts close to the bit immediately after operation; they may be extremely hot an...

Page 6 - Rotation with hammering; Hammering only

6 the tool, causing injury to you or someone around you. • Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it is not being inserted correctly. Switch action 1 003104 CAUTION: • Before inserting the battery cartridge into the tool, always check to see...

Page 7 - ASSEMBLY; Side grip

7 Torque limiter The torque limiter will actuate when a certain torque level is reached. The motor will disengage from the output shaft. When this happens, the bit will stop turning. CAUTION: • As soon as the torque limiter actuates, switch off the tool immediately. This will help prevent premature ...

Page 8 - Depth gauge; OPERATION; Hammer drilling operation

8 Bit angle (when chipping, scaling or demolishing) 1 2 003170 1 003174 Depress the lock button and rotate the change lever so that the pointer points to the symbol. Then make sure that the bit is securely held in place by turning it slightly. To change the bit angle, depress the lock button and rot...

Page 9 - Drilling in wood or metal; MAINTENANCE; Replacing carbon brushes

9 repeating this several times, the hole will be cleaned out and normal drilling may be resumed. CAUTION: • There is a tremendous and sudden twisting force exerted on the tool/bit at the time of hole break-through, when the hole becomes clogged with chips and particles, or when striking reinforcing ...

Page 10 - ACCESSORIES

10 1 2 003228 To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita too...

Page 12 - Makita Corporation

12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884305F220

Makita BHR200 - Manual

Table of Contents:

Summary

Other Makita Models