Makita BHP460 - Manual - manualsarea.com

Page 4 - ENGLISH; Explanation of general view

4 ENGLISH Explanation of general view 1 Button 2 Battery car tridge 3 Terminal cover 4 Charging light 5 Grip base 6 Teeth 7 Side grip 8 Loosen 9 Tighten 10 Depth rod 11 Thumb screw 12 Sleeve 13 Bit 14 Bit holder 15 Switch trigger 16 Reversing switch lever 17 A side 18 B side 19 Clockwise 20 Counterc...

Page 6 - Tips for maintaining maximum battery life

6 Conditioning charge (DC24SA only) Conditioning charge can extend the life of battery by automatically searching the optimum charging condition for thebatteries in every situation. The battery treated in the following conditions repeatedly, will wear out quicker, and yellow warning light may flash....

Page 7 - Nominal diameter

7 Switch action (Fig. 7) CAUTION: Before inserting the battery car tridge into the tool, alwayscheck to see that the switch trigger actuates properly andreturns to the “OFF” position when released. To star t the tool, simply pull the trigger. Tool speed isincreased by increasing pressure on the trig...

Page 8 - MAINTENANCE

8 Drilling operation First, turn the action mode changing ring so that thearrow on the tool body points to the M marking. The adjusting ring can be aligned in any torque levels for thisoperation. Then proceed as follows. • Drilling in wood When drilling in wood, best results are obtained withwood dr...

Page 9 - NEDERLANDS; Verklaring van algemene gegevens

26 NEDERLANDS Verklaring van algemene gegevens 1 Knop 2 Accu 3 Accuklemdeksel 4 Oplaadlampje 5 Handgreepvoet 6 Tanden 7 Zijhandgreep 8 Losdraaien 9 Vastdraaien 10 Dieptestang 11 Vleugelschroef 12 Bus 13 Boor 14 Boorhouder 15 Trekschakelaar 16 Omkeerschakelaar 17 Zijde A 18 Zijde B 19 Rechtse draairi...

Page 13 - Nominale diameter van

30 Indraaien van schroeven (Fig. 12) Draai eerst de werkingskeuzering zodat de wijzer op hetgereedschap naar de U markering wijst. Kies met de afstelring het juiste draaimoment voor uw werk. Gadaarna als volgt te werk. Plaats de punt van de schroefbit in de schroefkop enoefen druk op het gereedschap...

Page 14 - ONDERHOUD

31 ONDERHOUD LET OP: Controleer altijd of de machine is uitgeschakeld en deaccu is losgekoppeld vooraleer onderhoud uit te voerenaan de machine. Vervangen van koolborstels (Fig. 14 en 15) Ver vang de borstels wanneer ze tot aan de aangegevenlimiet zijn afgesleten. Beide koolborstels dienen tegelij-k...

Page 15 - ΕΞΑΡΤΗΜΑΤΑ

68 GB ACCESSORIES CAUTION:These accessories or attachments are recommended foruse with your Makita tool specified in this manual. Theuse of any other accessories or attachments mightpresent a risk of injury to persons. The accessories orattachments should be used only in the proper andintended manne...

Page 20 - PORTUGUÊS

73 ENG006-2-V4 Só para países Europeus Ruído e vibração Os níveis normais de ruído A são nível de pressão de som: 87 dB (A) nível do sum: 98 dB (A)A incer teza é de 3 dB (A). – Utilize protectores para os ouvidos – O valor médio da aceleração é 10 m/s 2 . Estes valores foram obtidos de acordo com EN...

Page 21 - Yasuhiko Kanzaki

74 ENH102-4 EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this productis in compliance with the following standards of standard-ized documents, EN60745, EN55014 in accordance with Council Directives, 89/336/EEC and98/37/EC. DÉCLARATION DE CONFORMITÉ CE Nous déclarons sou...

Page 22 - DECLARAÇÃO DE CONFORMIDADE DA CE; EU-DEKLARATION OM KONFORMITET; EUs SAMSVARS-ERKLÆRING; ΕΛΛΗΝΙΚΑ

75 ENH102-4 DECLARAÇÃO DE CONFORMIDADE DA CE Declaramos sob inteira responsabilidade que esteproduto obedece às seguintes normas de documentosnormalizados, EN60745, EN55014 de acordo com as directivas 89/336/CEE e 98/37/CE doConselho. EU-DEKLARATION OM KONFORMITET Vi erklærer hermed på eget ansvar, ...

Page 23 - Makita Corporation

Makita BHP460 - Manual

Table of Contents:

Summary

Other Makita Models