Magnavox TB100MW9A - Manual

Table of Contents:

• Page 2 – Before Using; TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS; CAUTION; RISK OF ELECTRIC SHOCK; Important Safeguards
• Page 3 – Date of Purchase
• Page 4 – Location; Important Copyright Information; Precautions
• Page 5 – T a b l e o f C o n t e n t s; with the
• Page 6 – Overview; CO N N E C T I O N; Conexión a un TV sin tomas de A/V; Conexión a un TV con tomas de A/V; Connecting to; S E T U P W I Z A R D; Language for TV screen; Connection for audio output
• Page 7 – Information on Digital Broadcasting; Check the following accessories when unpacking the STB:; Installing Batteries; Instalación de pilas
• Page 8 – Location of Controls; Ubicación del control
• Page 9 – Front Panel; POWER; Turns STB’s main power on and off .; Rear Panel; AC power cord
• Page 10 – Connections; Disconnect the AC power cords of the devices from the AC outlet.; Plug all AC power cords into AC outlets, then turn all devices on.; Connecting to a TV without A/V Jacks; Connecting to a TV with A/V Jacks
• Page 11 – Note to the Cable TV System Installer:
• Page 12 – Connecting to Other Devices; Conexión a otros dispositivos
• Page 13 – Initial Setup; Ajùste inicial; Switch the STB’s mains power on.; Appropriate Viewing Channel; down over 3 seconds.
• Page 14 – The “SETUP WIZARD” is now complete.; To cancel during scanning
• Page 15 – Basic Operation; About Sub-channel Broadcasting; ATSC; Selecting Channels on the STB; Enter the main channel number.; If the main channel number is 1 digit, press
• Page 16 – Choosing Audio Language; Audio language changes as follows.; Picture Still; You can freeze the image on the TV screen.; To cancel still mode; Press any button except
• Page 17 – Channel Banner; To remove the channel banner:; Press; Select the desired program using [; Press
• Page 18 – Advanced Operation; Autoscan; To cancel during scanning:; When “NO SIGNAL” appears on the TV screen:; Verify the antenna connection, then scan again.; Adding/Deleting Channels; Add or delete desired channels in the channel map.
• Page 19 – Add; With “ADD” selected, enter the main; Delete; Select “DELETE” using [; The selected channel is now deleted.; To continue deleting:
• Page 20 – Adjusting Antenna; You can verify the signal strength of each channel.; To adjust other channels:; Select the channel using [CH; Selecting Display Mode; Display Mode; Descriptions of each settings are explained
• Page 21 – Information on Display Mode; LETTERBOX; Setting the Time Zone and; Press; Time Zone; Select “TIME ZONE” using [; Select your time zone using [
• Page 22 – Select “ON” or “OFF” using [; Password entry field will appear.
• Page 23 – Select the desired rating type using; Select the desired rating using; MPAA Rating
• Page 24 – Canadian English Rating; Enter the new 4-digit password
• Page 25 – Closed Caption Options; CC Style; - you can customize the CC style as you like.; CC Style Edit; H I . E V E R YO N E
• Page 26 – Auto Power Down; Select desired amount of time using; Select “OFF” to cancel the auto power down.; Specifi cations; DTV Digital to Analog Converter
• Page 27 – Others; Troubleshooting; Symptom; No power; The batteries may be depleted. Replace them with new ones.; Blocked noise on picture; Make sure that the RF cable is connected correctly. (; Low volume; Fin
• Page 28 – LIMITED WARRANTY; original retail purchase.; LIMITS AND EXCLUSIONS:; Printed in China