Magnavox 50ML6200D - Manual

IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any of the ventilation openings. Install in...

1 A Guide to Digital TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Use of the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . ...

2 Do not insert the power plug in a wall socket before all connections are made. The major benefit of this DLP® projection television is its large viewing screen. To see the large screen at its best, test various locations in the room to find the optimal spot for viewing. Be sure to allow a minimum ...

4 Cable box with S-Video, component video (YPbPr) or HDMI connectors See Connect Accessory Devices, p. 22-23. Via Antenna Via antenna you can watch whatever DTV programs being broadcast in your area for free. If you’re not sure what HDTV programming is available in your area, contact your local cont...

5 Note: For most buttons pressing a button once will activate the function. Pressing a second time will de-activate it.When a button enables multiple options, a small list will be shown. Press repeatedly to select the next item in the list. The list will be removed automatically after 6 seconds or p...

6 Should your remote be lost or broken you can still change some of the basic settings with the buttons on your TV. Press the power switch . to switch the TV on. Press:• the VOLUME + or − button to adjust the volume; • the CHANNEL ≤ or ≥ button to select the TV channels or sources. The MENU button c...

7 Tips:• When any channel is locked with 'Channel Lock' or the 'Lock After' turned on, you will be prompt to enter your PIN code before you can do autoprogramming.• When interrupted, the updated channel information is retained as well as the old channel information that were not updated.• Background...

8 Digital Channel selection delay Due to the tuning complexity of subchannel digital programming, the time to select and view a digital channel may take slightly longer than what the viewer is normally accustomed to (as compared to analog channel programs).Digital channel broadcasts contain program ...

9 How to navigate through the Settings menus The Settings menu allows you to access and change settings and preferences. & Press the MENU button on the remote control to call up the Settings menu. - On the left panel the highlight can be set on a menu item with the cursor up/down button. The rig...

10 This menu is used to control the settings of special TV functions, features and accessory devices. The Preferences menu allows you to change settings that will be accessed only occasionally. The Source menu allows you to select a source. The Clock menu allows you to use your TV as a clock. This s...

12 Tips: Emergency Alert Signalling is not possible:- when content browsing;- with analogue video sources. - You always have the possibility to remove the message from the screen. - The message display will overlap whatever menu element or other message is on the screen. Caution! If you have forgott...

13 Source This menu allows you to identify the accessory devices you have connected to the external input/output. & Select Source in the Setup menu. é Press the cursor right button to enter the list of types of devices connected to the selected input. “ Select the accessory device with the curso...

14 Press the MENU button on the remote control to display the Settings menu. The TV menu gives you an overview of the menus you can select. Note: Depending on the input signal, one or more menu items may not be selectable. Picture menu Note: Some menu items are not available in case of HD sources. &...

15 DNR (Digital Noise Reduction) Automatically filters out and reduces the image noise and improves picture quality when receiving weak video signals. & Press the cursor right button to enter the list. é Select Off, Minimum, Medium or Maximum according to the image noise. “ Press the cursor left...

16 Sound mode This selects the modes for stereo or surround sound reproduction dependent on the broadcast signals or signals from external inputs received. Alternate audio (only selectable with analog broadcast signals) This gives you the possibility to swap between the Main and Second Audio Program...

17 Channels menu This menu can control special functions for the TV channels. & Select Channels in the TV settings menu with the cursor up/down. é Press the cursor right to enter the channels menu. “ Press the cursor up/down to select a channels menu item. Lock after Note: Lock after is only sel...

18 When All has been selected, all items in the age-based and in the contents-based lists are locked.If, while All is selected, any other item, either an age-based or content-based item, is unselected, then All is automatically unselected. None is the selection for items that either have no rating i...

19 Region ratings lock This function allows you to control access to digital programs based on downloaded Region Ratings. & Select Region ratings lock with the cursor down. é Press the cursor right to enter the list. You are asked to enter your code. (See Set/Change PIN, p. 12.) if the code is c...

20 The picture you received from the broadcaster or playback from DVDs may be in widescreen or conventional modes. Pictures in conventional mode will have black bars on the right and left of the screen. Select Picture format & Press FORMAT button to display a list of available display formats (d...

21 Using HDMI Connect RF cable from wall to input at back of the cable box. Connect cable box to TV using HDMI cable. Note: If the accessory device has DVI output only, use a DVI to HDMI adapter cable to connect to the HDMI connector. You need to also connect the audio cable to L and R AUDIO jacks. ...

22 4 DVD Player/DVD Recorder/VCR to TV Using S-Video Connect S-Video cable to S-Video input on back of TV and S-Video output on the back of DVD/VCR player or recorder. Connect audio cables (red/white) to audio AV inputs on back of TV and Audio outputs on back/side of DVD/VCR player or recorder. Turn...

23 Using SPDIF Connect audio cable from the SPDIF jack on the rear of the TV to the DIGITAL IN jack on the rear of the hi-fi system. Tip:SPDIF (Sony and Philips Digital Interconnect Format) is highly recommended for high quality digital sound output. 7 Audio to Hi-Fi System (Digital) A Select Connec...

24 Multimedia browser Multimedia browser lets you display pictures or play audio files stored on a USB device.The Multimedia browser application is invoked from the My Content menu (press the MY CONTENT button) by selecting the USB device and pressing the cursor right. Notes: - Following file format...

25 Following icons may appear: folder pictures music self made playlist/album Notes: • Your TV supports slide shows with background music. • The playback will continue to play even if temporarily switched to browser screens. The audio will be stopped when another song starts playing, or when the end...

26 SYMPTOMS SUGGESTED STEPS TO TAKE Hookup Can't get external audio equipment to work with TV. 1. SPDIF output audio only in digital mode and the audio equipment used must have the decoder. 2. Monitor Out Audio LR output audio for both analog and digital programs Installation Can't get the AV channe...

27 If your problem is not solved Turn your TV off and then on again once. Never attempt to repair a defective TV yourself. Check with your dealer or call a TV technician. Telephone number Magnavox Customer Care Center: 1-800-705-2000 Online Help: www.magnavox.com/usasupport Please, have the Model an...

28 Glossary Aspect Ratio The ratio between the width and height of the TV picture on the screen. In a normal TV set the aspect ratio is 4 to 3 (4:3). The new aspect ratio in HDTV is 16:9 which resembles the aspect ratio in a movie theatre (Widescreen). New TV systems support both 4:3 and 16:9 aspect...

29 Care and Cleaning • To avoid possible shock hazard, be sure the TV is unplugged from the electrical outlet before cleaning. • Regularly dust the TV with a dry, non-scratching duster to keep the TV clean. • When cleaning the TV, take care not to scratch or damage the screen surface. Avoid wearing ...

30 Specifications 50ML6200D PICTURE / DISPLAY Aspect ratio 16 : 9 Display screen type DLP® Projection TV Picture Enhancement Progressive Scan, 3D combfilter, Black stretch, Auto Picture (5 modes), Digital Noise Reduction (DNR) SOUND Output Power (RMS) 2 x 10W Sound Enhancement Auto Volume Leveller, ...

31 Introduction Magnavox offers software upgrade capability for your TV using USB portable memory. After you have completed a software upgrade, your TV will typically perform better. What improvements are made depends on the upgrade software you are using as well as the software your TV contained be...

32 Manual software upgrade procedure For a manual software upgrade copy the “autorun.upg” file in a directory called “Upgrades” located in the root of the USB portable memory. & Insert the portable memory that contains the downloaded software upgrade. é The TV will automatically start the conten...