Magnadyne M9800 - Manual - manualsarea.com

Page 3 - Installation Procedure; B. Insert the keys provided into the

Installation Procedure Removing the Unit: In the event that the unit requiresremoval from it’s mounting location,repeat the following procedures. A. Release the rear support strap. B. Insert the keys provided into the slot on both sides of the chassisuntil locked. (snapped into place) C. Pull on the...

Page 4 - Removing the Unit

Installation Procedure FAD VOL PWR TONE SCAN R .FREQ BAND 1 5 2 3 4 TUNE WEATHER AM / FM / WB STEREO BAL 4 Nut Washer SheetMetal Screw Metal Strap Dashboard Mounting Sleeve Removal Keys Removing the Unit Figure 1

Page 5 - Wiring Four Speakers:; Do Not Ground any speakers to the

Installation Procedure Speaker Connections: Note: Ever y speaker has a positive (+) and a negative (-) connection termi-nal, therefore ever y speaker musthave two wires connected to it. Toproperly connect the speaker systemto your new Magnadyne radio, youmust have a + and - wire coming fromever y sp...

Page 6 - Four Speaker Wiring; Two Speaker Wiring

Installation Procedure Left Front Speaker Left Rear Speaker + - Green Wire Orange Wire 12 VDC Constant Green/Black Wire Black/Green Wire Green/Red Wire Right Rear Speaker Right Front Speaker + - + - + - Gray Wire Black/Gray Wire Gray/Black Wire Gray/Red Wire Red Wire 12 VDC Ign./Acc. Lead Black Wire...

Page 7 - Control Button Identification; Figure 2; Display; Figure 4

Control Button Identification 7 2 16 3 47 8 5 10 9 Figure 2 1. On/Off Power Switch, Control and Volume Level Adjuster. 2. Fader Control. 3. Balance and Tone Controls. 4. Radio Band Selector Button. 5. Manual Tuning Control Buttons. 6. Radio Station Scan Button. 7. Frequency Selector Button. 8. Weath...

Page 8 - Listening to the Radio:; Turn the vehicle’s ignition key to; Display Priority Note:; All 7 stations may not be; Using the Radio

Listening to the Radio: 1. Turn the vehicle’s ignition key to the “ON” or “ACC” position to pro-vide power to the radio. 2. Rotate knob (1) clockwise to turn the radio on. Adjust the volumeknob (1) to a low listening level. 3. Use the band button (4) to select the AM or FM radio band. The FMband has...

Page 9 - Clock Setting Programming; Setting the Clock with the Radio OFF

Clock Setting Programming Setting the Clock with the Radio OFF 1. Turn the vehicles ignition key to the “ON” or “ACC” position to pro-vide power to the radio. You willknow that radio has sufficientpower as the clock will be displayedin the LCD display window (9). 2. Press the ‘R.FREQ” button (7) and...

Page 10 - Volume Level; Rotate the volume control knob; Left to Right Balance; After the volume control is rotated; Audio Adjustments

10 Volume Level 1. Rotate the volume control knob (1) clockwise to increase thevolume. 2. Rotate the volume control knob (1) counter clockwise to decreasethe volume. Left to Right Balance 2. Rotating the “BAL “ knob (3) to the left will balance the speakers tothe left. 3. Rotating the “BAL” knob (3)...

Page 11 - Specifications; Features and Specifications are subject to

Specifications AM/FM Tuner: FM Frequency Range . . 87.5 - 107.9MHzAM Frequency Range . . 520 - 1720 KHzIF Rejection . . . . . . . . . . . . . . . AM 45dB . . . . . . . . . . . . . . . . . . . . . . . . . . FM 70dB Image Rejection . . . . . . . . . . . . AM 55dB . . . . . . . . . . . . . . . . . . . ...

Page 12 - Warranty

Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within 1 year from the date ofsale to you, repair, replace or refund the retail sales price of said product or any partthereof, at the option of the Magnadyne Corporation or its authorized agents, if saidprodu...

Magnadyne M9800 - Manual

Table of Contents:

Summary

Other Magnadyne Models