Page 3 - Warnings; Caution
3 Warnings • The driver should neither watch the display nor operate the system while driving. Watching the display or operating the system will distract the driver from looking ahead of the vehicle and can cause accidents. Always stop the vehicle in a safe location and use the parking brake before ...
Page 5 - Remote Control Button Locations and Functions; Radio: Press and the tuner will scan to the; Basics Operation
Remote Control Button Locations and Functions (Continued) 11. DVD Menu: Displays the movie menu. 12. Tune/Track/Chapter (l �� , �� l) : Radio: Press and the tuner will scan to the next strong station and stop. Press and hold until “MANUAL” appears in the display then release. Then press again until ...
Page 6 - System Setup; Homepage Menu: Is the initial or main screen where
System Setup System Setup provides special settings to fine-tune the user experience. Select the Setup icon on the second screen of the Homepage. The System Setup screen will appear. Select the icon corresponding to the setting you want to change. Use the adjust- ment buttons on the screen to make c...
Page 7 - Loading the GPS software:; Brightness Adjustment:
System Setup (Continued) GPS Setup (M4-LCD Only): The M4-LCD comes preloaded with the GPS soft- ware and is ready to use, no updating is necessary. Loading the GPS software: 1. Remove the SD card from the rear card reader. 2. Send the GPS SD card to an authorized service center. 3. Replace the SD ca...
Page 9 - Sound Controls; Turning Off the Equalizer:; Increase
Reset: 1. Press the button to reveal more setup features. 2. Type “5365” as the password then press the button. 3. The unit will reset the radio area and wallpaper to factory default settings. Sound Controls Volume: Increase the volume by pressing the + side of the button.Decrease the volume by pres...
Page 10 - Wallpaper
Sound Controls (Continued) 10 Balance and Fader: Press the button to activate the speaker adjustment screen. Use the , , and buttons to adjust the speaker’s balance and fader. Press the button to return to the factory settings. Center Speaker: To activate the center speaker press the button. Press t...
Page 11 - Radio Operation; Selecting the Radio Source:; Tuning in a Radio Station Using Seek:; Hold; Memorizing Radio Stations:; Press the Band button to select either the; The Memorized Radio Station Recall Indicator
11 Radio Operation Power On/Off: Press the power button ( ) to turn the unit on. Selecting the Radio Source: Touch the HOME button to activate the Homepage screen. Touch the Radio button to enter the radio operation screen. NAV Selecting the AM, FM or WB Band: Press the Band button repeatedly and se...
Page 12 - Automatically Store Radio Stations:; Press and hold the AS/PS button until “AS/PS”; Note: After the new stations are stored into; Scanning Stored Radio Stations:; Local/Distant Reception
12 Radio Operation (continued) Automatically Store Radio Stations: 1. Press the BAND button to select from the FM1, FM2, FM3, AM1 or AM2 radio band. 2. Press and hold the AS/PS button until “AS/PS” appears in the display. The tuner will search for the strongest stations and store them into memory. T...
Page 14 - Weather Band Operation; Disc Warnings; Preparing New Discs with Rough Spots:; Selecting the Weather Band Radio Source:; BAND button to select the AM/FM radio sta-
Weather Band Operation 14 NAV Disc Warnings DVD 12cm disc (Single-sided disc only) CD 12cm disc MP3 12cm disc Label side up Do not touch the underside of the disc Do not bend Wipe the disc from the center toward the outside edge Rough spots on outside edge Rough spots on inside edge Ball point pen o...
Page 15 - Music Disc Operation; Label Side Up; Pausing a Music Disc:; ll button to pause the disc. Press it; Music Disc Track Selection:
15 Music Disc Operation General Operations: Gently insert the disc into the slot with the label side up. The unit will automatically load the disc. Note: If a disc does not auto-load, DO NOT FORCE it into the slot, as you may already have a disc loaded. NAV Label Side Up Pausing a Music Disc: Touch ...
Page 16 - Stopping a Music Disc:; ll
16 Music Disc Operation (continued) Ejecting a Music Disc: Press the button to eject a disc. NAV Repeating a Music Disc Track: The unit’s default setting is to repeat the entire disc. To repeat a music disc track: 1. Touch the screen to reveal the disc controls.2. Press the in lower right hand corne...
Page 17 - USB Flash Drive; Revealing the Home Button:
17 MP3 Operation (Disc, USB and SD Card) General Operations: Disc: Gently insert the disc into the slot with the label side up. Inserting the disc will automati- cally switch the unit to Disc source screen. Note: If a disc does not auto-load, DO NOT FORCE it into the slot, as you may already have a ...
Page 18 - MP3 Interface Screen:; Music Photos Video
18 MP3 Operation (Disc, USB and SD Card) (continued) MP3 Interface Screen: The MP3 media (CD, SD card or USB flash drive) contains folder(s) with files inside the folders. These files can include music tracks, photos and/ or videos (compatible MPEG1, MPEG2 and DivX files). Use the icons at the botto...
Page 20 - Movie Disc Operation; Moving Vehicle Warning:; Selecting the Disc Source:
20 Movie Disc Operation Moving Vehicle Warning: If the vehicle is moving, this screen will be displayed. The sound of the movie disc can be heard. Once the vehicle is stopped and the park- ing brake is engaged, the video will play on the screen. Menu Screen: 1. Touch the screen to reveal the disc co...
Page 21 - l button to select a next chapter.; Stopping a Movie Disc:
21 Selecting a Chapter: Touch the screen to activate the movie disc control button panel. Press the l �� button to select a previous chapter. Press the �� l button to select a next chapter. Stopping a Movie Disc: Touch the screen to activate the control button panel.Press the � button to stop play. ...
Page 23 - Direct Chapter Selection:; Screen Adjustment Controls:
23 Ejecting a Disc: Press the button to eject a disc. Movie Disc Operation (continued) NAV Slow Motion: Continue to press the l � button on the remote to play the movie is slow motion in the following order:SF 1/2, SF 1/3, SF 1/4, SF 1/5, SF 1/6, SF 1/7 To resume normal play, press the � ll button. ...
Page 24 - Movie Disc Setup Menu; Movie Disc Setup Menu:; ment controls in the movie playback disc
24 Movie Disc Setup Menu Note: To access the Movie Disc Setup Menu, a movie disc has to be inserted. Movie Disc Setup Menu: 1. Touch the screen during movie playback to reveal the disc controls. 2. Press the in lower right hand corner of the screen to reveal the secondary disc controls. 3. Press the...
Page 25 - Selecting the GPS Navigation System:; Press and release the button from any; Note: Pressing the button again will return; the unit to last non GPS screen.; • Enter an address with zip code. This way you do
25 GPS Navigation Operation (M4-LCD Only) Power On/Off: Press the power button ( ) to turn the unit on. Selecting the GPS Navigation System: Direct Selection: Press and release the button from any screens to enter the navigation screen. Note: Pressing the button again will return the unit to last no...
Page 27 - Touch the Screen to Reveal More Features
27 GPS Navigation Operation (M4-LCD Only) (continued) 1. Turn preview, that is the next route event. Press to open the Route Information screen. 2. Second upcoming route event. Press to open the trip itinerary. 3. Trip data. Press to open the Trip information screen.4. GPS position quality. Press to...
Page 28 - Selecting the Destination of a Route; Selecting the Cursor as the Destination:; Entering an Address or Part of an Address:
28 GPS Navigation Operation (M4-LCD Only) (continued) Selecting the Destination of a Route Selecting the Cursor as the Destination: 1. Locate your destination on the map. Move and scale the map as needed. 2. Touch the location on the map that you want to select as you destination. The cursor appears...
Page 29 - Entering a Zip Code:
29 GPS Navigation Operation (M4-LCD Only) (continued) Entering an Address or part of an Address (Continued): 4. By default, the navigation system automati- cally selects the country, state and city. If you need to change any of the previous selection touch the screen next to item you want to change....
Page 31 - Saved Search Criteria Detour:
31 GPS Navigation Operation (M4-LCD Only) (continued) Making a Detour: Avoid Parts of the Route Detour: 1. Touch the Second Upcoming Route Event area. 2. Use the and buttons at the bottom of the screen to find the part of the route to avoid. Touch and highlight part of the route to avoid. 3. Press t...
Page 32 - detour flag until a flashing cursor shows up on; Remove Via button and your detour will disappear.; Direct Selection Detour:; Zoom the map so the part of the route you want; Note: To delete this detour touch the Detour but-
32 GPS Navigation Operation (M4-LCD Only) (continued) Saved Search Criteria Detour (Continued): 3. Touch the Insert Via button and a yellow flag will appear on the map indicating the detour route has been calculated and you can start navigating. Note: To delete this detour touch the yellow detour fl...
Page 33 - Load Route: You can navigate a route your
33 GPS Navigation Operation (M4-LCD Only) (continued) NAV Route Menu: Touch the Route icon to save, load and edit your routes. 1 2 3 4 5 6 7 8 9 1. Route Information: Contains data (estimated arrival, route length, time left, distance left, method of travel and warning icons) and some of the functio...
Page 34 - Saved Routed: Renaming or deleting saved; Saved Search Criteria.
34 GPS Navigation Operation (M4-LCD Only) (continued) Manage Menu: Touch the Manage icon to manage the content that the navigation system stores. 1. Saved Routed: Renaming or deleting saved routes. 2. Track Logs: Recording, simulating, renaming or deleting track logs, assigning color to them to be s...
Page 35 - Bluetooth Operation; Selecting the Bluetooth Source:; Pairing Bluetooth Devices:; Note 1: If the mobile phone has been previously
35 Bluetooth Operation Selecting the Bluetooth Source: Touch the HOME button to activate the Homepage screen. Touch the BT button to enter the Bluetooth interface. NAV Pairing Bluetooth Devices: 1. Enter the Bluetooth interface on M4-LCD/M3-LCD.2. Open the mobile phone’s setup menu.3. Open the Bluet...
Page 36 - Number; Last Phone Number Redial:; Connecting an Already Used Phone:
NAV 36 Bluetooth Operation (continued) Ending a Call: Touch the red phone to end the call. Phone Log: 1. Make sure the mobile phone is connected to the unit. 2. Press the button to enter the Bluetooth phone log interface. 3. Select between: Calls Dialed, Calls Received or Calls Missed. 4. Press the ...
Page 37 - ll button to pause the track, press it
37 Bluetooth Operation (continued) Phone Book: 1. Make sure the mobile phone is connected to the unit. 2. Press the button to enter the Bluetooth phone book interface. 3. Press the button to download the phone numbers from your mobile phone. 4. Press the or button to scroll through the phone numbers...
Page 38 - Satellite Radio Setup; Touch the HOME button to activate the; Enter the number 000 then press the ENTER; appear next to the “SONG TITLE” header.
38 Note: The vehicle must be equipped with an optional satellite tuner (SXV100) in order to receive a satellite sig- nal. If the tuner is not activated, call 1-866-635-2349 to activate. The Tuner ID Number (SID) is required during the activation process. Follow the steps below to access the Tuner ID...
Page 39 - Satellite Radio Operation; Channels are selected by the following methods:; Information display during reception:; Enter the channel number then press the
39 NAV Satellite Radio Operation Please note that satellite radio signal may be blocked by trees, buildings or other obstacles. Channel Selection Modes: Channels are selected by the following methods: • Manual Tuning: Use the Manual Tuning method to scan thru the channels. • Direct Tuning: Use the D...
Page 40 - Category
40 Satellite Radio Operation (Continued) Category Tuning: 1. Press the CATEGORY button. 2. Use the � or � buttons to select the Category. The Category can also be selected by touching the desired category on the screen. To select the Channel, use the � or � but- tons. The channel can also be selecte...
Page 41 - Recalling Preset Channel:; Programming Preset Satellite Channel:; Sirius Band; Preset Number
41 4. Additional channels can also be programmed in the different preset bands (SIR1, SIR2 and SIR 3). Press the SIR BAND button to access the different preset bands. Press to return to the main satellite radio screen. Note: Each band can program 6 channels, so 18 satellite channels can be programme...
Page 42 - Select the channel to be skipped by high-
42 Satellite Radio Operation (Option) (Continued) Skipping a Channel: 1. Press the MENU button. 2. Press the SKIP CH button. 3. Select the channel to be skipped by high- lighting the channel. Recalling Preset Channel (continued): 2. To recall a preset channel, press and release the preset number dis...
Page 43 - Press the button and will appear next; Reinstating a Skipped a Channel:
43 NAV Satellite Radio Operation (Option) (Continued) Skipping a Channel (continued): 4. Press the button and will appear next to the channel indicating that the channel is skipped. Reinstating a Skipped a Channel: Select the channel to be reinstated by highlight-ing the channel. Press the button an...
Page 44 - Selecting the IPOD Source:; IPOD Operation
44 General Operations: 1. Press the power button ( ) to turn the unit on.2. Connect an IPOD to the cable attached to the M4-LCD/M3-LCD. 3. The unit will automatically switch to the IPOD source screen and start playing. Note: The controls on the IPOD will become inop- erable and the unit will now con...
Page 45 - Navigation Controls
45 NAV Navigation Controls Navigation Controls: Touch the screen to activate the track controls. Press the in lower right hand corner to acti- vate the navigation controls. Navigation: Press the button to scroll up through the menu item. Same operation as the IPOD’s Click Wheel. Press the button to ...
Page 46 - Browse for a Song; or; Press the OK button and the song will start
46 IPOD Operation (Option) (Continued) Browse for a Song (continued) : 3. Press the OK button. 4. Press the or button to scroll through the songs. 5. Press the OK button and the song will start playing. NAV NAV NAV
Page 47 - Camera Operation; Manually Selecting the Camera View:; Camera button to select the camera source; Automatic Camera Selection:; Note: Side view cameras do not have audio.
47 Camera Operation Manually Selecting the Camera View: 1. Touch the HOME button to activate the Homepage screen. Press the in the lower right hand corner of the screen to reveal the second Homepage screen. Then press the Camera button to select the camera source screen. 2. Select a camera view (Fro...
Page 48 - Auxiliary Audio Video Inputs Operation; Selecting the Auxiliary Audio/Video Source:; AV-IN2 button to select the Auxiliary Audio/Video
48 Auxiliary Audio Video Inputs Operation Selecting the Auxiliary Audio/Video Source: Touch the HOME button to activate the Homepage screen. Press the in the lower right hand corner of the screen to reveal the second Homepage screen. Then press the AV-IN1 or AV-IN2 button to select the Auxiliary Aud...
Page 49 - Installation; dashboard to accommodate the mounting sleeve.
49 Installation Step 1 : The radio chassis is designed to be “Sleeve Mounted” through an opening in the dashboard panel. The required opening size is 182mm (7-3/16”) x 84mm (3-5/16”). Cut or engage an opening in the dashboard to accommodate the mounting sleeve. Step 2 : Insert the mounting sleeve in...
Page 50 - Speaker Connections; White Wire
50 Speaker Connections White/Black Wire Left Front Speaker White Wire Gray/Black Wire Gray Wire Right Front Speaker Center Channel Speaker Brown/Black Wire Brown Wire Right Rear Speaker Violet/Black Wire Violet Wire Green/Black Wire Green Wire Left Rear Speaker Subwoofer (Optional)
Page 51 - Input and Output Connections; Infrared Remote Sensor; A Fuse
51 Input and Output Connections 1 Red Wire: (+) to 12 Volt Ignition Yellow Wire: (+) to 12 Volt Constant Black Wire: Ground Orange Wire: Parking Brake Switch (-) Blue/Black Wire: Dimmer Control (+) Infrared Remote Sensor (Optional) IPOD (Optional) IPOD Cable RV5-HAR6 (Optional) This unit for use onl...
Page 53 - Note: Audio Output is not; controlled by the M4-LCD
53 Input and Output Connections (Continued) RGB Monitor (Optional) TV Monitor (Optional) Video Second Monitor (Optional) Video Output (Yellow) Video Output (Red) Video Output (Green) Video Output (Blue) Sync (Brown) Audio Output Left (White) Audio Output Right (Red) Video Output (Yellow) Note: Audio...
Page 54 - Camera Connections; Camera
54 Camera Connections White Wire: Left Trigger (+12V) Gray Wire: Right Trigger (+12V) Green Wire: Rear Trigger (+12V) C125: (Front) C125: (Rearview) C-SDR: (Right Side) C-SDL: (Left Side) CAM1: (White Connector) CAM2: (Gray Connector) CAM3: (Green Connector) 13-Pin Camera Harness
Page 55 - Replaceable Fuse; Rear SD Card Holder; SD Card
55 The LCD display may fail to function normally due to the vehicle’s battery condition, and could require restarting the radio’s microprocessor if: • The vehicle has been “jump started” from a dead battery condition. • The vehicle battery becomes very low and is quick-charged. • The vehicle battery...
Page 56 - Warranty
© Copyright 2011 Magnadyne Corporation M3/4-LCD-UM Rev. A 6-20-11 Warranty ONE (1) YEAR LIMITED WARRANTY Magnadyne Corporation or its authorized agents will within one year from the date of sale to you, repair, replace or refund the retail sales price of said product or any part thereof, at the opti...
