Lowrance RIM 300 - Manual
Lowrance RIM 300 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – For free owner's manuals and the most current information on
- Page 3 – Warnings and Cautions
- Page 4 – RIM 300 Installation; tions and warnings for powering the display unit and a
- Page 5 – Tip; There is no ground wire, so the; be grounded to the same source as the
- Page 6 – Notes
- Page 8 – FCC Compliance; Reorient or relocate the receiving antenna.
- Page 10 – How to Obtain Service...; ...outside Canada and the USA:
- Page 11 – Shipping Information
RIM 300
Radar Interface Module
Installation Instructions
Pub. 988-0161-04
D
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
Copyright © 2008 Navico All rights reserved. No part of this manual may be copied, reproduced, republished, trans- mitted or distributed for any purpose, without prior written consent of Navico. Any unauthorized commercial distribution of this man- ual is strictly prohibited. Lowrance ® is a registe...
1 Warnings and Cautions Caution: Use the radar at your own risk. Your radar was designed for use as a navigation aid. It should not be used for purposes that re- quire precise measurements of direction, distance, topography or location. Always compare the navigation information received from your ra...
2 RIM 300 Installation The RIM 300 will replace the power cable that came with your display unit. Your RIM 300 has three cables branching out from the cable plug, which include: radar data cable, display unit power cable and NMEA 2000 power cable. NOTE: You will need to purchase a SIMRAD heading sen...
