Lowrance 3600C - Manual

1 Section 1: Read Me First! How this manual can get you out on the road, fast! Welcome to the exciting world of digital GPS! We know you're anxiousto begin navigating, but we have a favor to ask. Before you grab theGlobalMap  3600C iGPS and begin installing it, please give us a mo- ment or two to e...

2 After you've learned the basics (or if you already have some GPS expe-rience), you may want to try out some of the GlobalMap 3600C's manyadvanced navigation features. That brings us to Section 4, Advanced GPS Operations . This section contains the rest of the unit's GPS com- mand functions, organi...

3 Case size: ......................... 5.4" H x 6.9" W x 3.4" D (13.8 x 17.6 x 8.6 cm); sealed and waterproof; suitable forsaltwater use. MMC slots: ...................... One with waterproof door (SD card compati- ble). Recording: ........................ MMC & SD memory cards for r...

4 Zoom range: .................... 39 ranges; 0.02 to 4,000 miles. NOTE: The above memory capacities refer only to the GlobalMap 3600C'son-board memory. The amount of GPS data you can record and savefor recall later is limited only by the number of MMC cards you have. NOTICE! The storage temperature...

6 Introduction to GPS and WAAS Well, now you know the basics of how the unit does its work. You mightbe ready to jump ahead to Section 2, Installation & Accessories, on page 11, so you can mount your GlobalMap 3600C and plug in the power. Oryou might want to see how our text formatting makes the...

8 receiver is only a tool. Always have another method of navigation avail-able, such as a map or chart and a compass. Also remember that this unit will always show navigation informationin the shortest line from your present position to a waypoint, regardlessof terrain! It only calculates position, ...

9 Arrow Keys The arrow keys control the movement of dotted cross-hair lines on yourmapping screen called the cursor. The arrow keys help you movearound the menus so you can execute different commands. They arerepresented by symbols like these, which denote the down arrow key,the up arrow, the left a...

11 Section 2: Installation & Accessories Preparations You can install the GPS system in some other order if you prefer, butwe recommend this installation sequence: Caution: You should read over this entire installation section before drill-ing any holes in your vehicle or vessel! 1. Determine th...

13 connected to a power supply, electrolysis can occur in the power ca-ble plug. This may result in corrosion of the plug body along withthe electrical contacts in the cable and the unit's power socket. In saltwater environments we recommend you connect the unitpower cable to the auxiliary power swi...

14 WARNING: This product must be independently fused with the en- closed 3-amp fuse (or equivalent), even if you connect toa fused accessory or power buss. If a malfunction happens inside the unit, extensive dam-age can occur if the enclosed fuse is not used. As with allelectrical devices, this unit...

15 shared information. Please note the buss must be powered to operate. (See instructions in this section on powering a NMEA 2000 buss.) IMPORTANT NOTE: The data from your internal GPS receiver will not be trans-mitted across the LowranceNET NMEA 2000 network. Youmust have an LGC-2000 GPS antenna mo...

16 Com-1 wiring to transmit NMEA position information to another NMEA-compatible device. GlobalMap 3600 iGPS Cable Connections. Mounting the Unit: Bracket or Portable You can install the GlobalMap 3600C on the top of a dash with the sup-plied gimbal bracket. It can also be mounted on a portable powe...

18 Install the gimbal bracket. Orient the bracket so the arms slope toward the front of your unit. Drill a 1-inch (25.4 mm) hole in the dash for the power cable. The bestlocation for this hole is immediately under the gimbal bracket location.This way, the bracket can be installed so that it covers t...

19 to leave enough slack in the cables to allow tilting or swiveling theGlobalMap 3600C. If you choose to fill in the hole, be sure to position thecables against the rear edge of the hole as you apply the fill material. Before positioning the bracket, be sure to hold the cables against therear edge ...

20 NOTE: Throughout this manual, we will use the term MMC, but just re-member that your unit can use an MMC or SD card to store data. Both of these solid-state flash memory devices are about the size of apostage stamp. An SD card is slightly thicker than an MMC. As thismanual went to press, MMCs and...

21 Other Accessories Other accessories include MMC cards, MMC card readers and MapCre-ate™ 6 custom mapping software for your computer. LEI offers severalspecialty plug-&-play map cards, including lake contour maps and ma-rine coastal charts. A variety of LowranceNET NMEA 2000 electronicprobe se...

23 Section 3: Basic GPS Operations This section addresses the unit's most basic GPS operations. The tuto- rials presented in Sec. 3 follow a chronological order. Sec. 4, Advanced GPS Operations , will discuss other more advanced functions and utili- ties. Material in Sec. 4 is arranged in alphabetic...

24 1. PWR/LIGHT (Power & Light) – The PWR key turns the unit on and off and activates the backlight. 2. PAGES – Pressing this and the ← → arrow keys (4) switches the unit between the three different page screens. (Satellite Status Page,Navigation Page and Map Page.) Each page represents one of t...

26 Timers command: controls the up timer, down timer and alarm clock settings. Browse MMC Files command: this allows you to view the installed MMC card and the files it contains. Pages The unit has three Pages that represent the three major operating modes.They are the Satellite Status Page, the Nav...

28 Navigation Page This screen has a compass rose that not only shows your direction oftravel, but also the direction to a recalled waypoint. To get to the Navi-gation Page: Press PAGES | → or ← to N AVIGATION | EXIT . The navigation screen looks like the one below when you're not navi- gating to a ...

29 Track is the heading, or the current direction you are actually travel-ing. Bearing is the direction of a line-of-sight from your present positionto the destination. No matter what direction you are steering, theBearing data box shows the compass direction straight to the destina-tion from your l...

32 The medium-detail U.S. maps contain: all incorporated cities; shaded met-ropolitan areas; county boundaries; shaded public lands (such as nationalforests and parks); some major city streets; Interstate, U.S. and state high-ways; Interstate highway exits and exit services information; large- and m...

33 Tip: In some urban areas, businesses are so close to one another thattheir POI icons crowd each other on the screen. You can reducescreen clutter and make streets and other map features easier tosee by simply turning off the display of POIs you're not watching for. (To see how, check the text on ...

34 Pages Menu with Two Map option selected, left. Map Page with two map windows, at right. The left map is active. Resize Window is another extremely handy feature for pages that havetwo major windows. You can change the relative size of the windows, aswell as horizontal or vertical layout, to suit ...

36 Basic GPS Quick Reference Start outdoors, with a clear view of the open sky. As you practice, trynavigating to a location at least a few blocks away. While you're learning,navigation in too small an area will constantly trigger arrival alarms. 1. Connect the unit to electric power. Make sure the ...

37 Find Your Current Position Finding your current position is as simple as turning the unit on. Un-der clear sky conditions, the unit automatically searches for satellitesand calculates its position in approximately one minute or less. NOTE: "Clear sky" means open sky, unobstructed by terra...

38 The selected airport to the northwest is 4.2 miles away. Selecting Any Map Item With the Cursor 1. Use the zoom keys and the arrow keys to move around the map andfind the item you wish to select. 2. Use the arrow keys and center the cursor cross-hair on the desired ob-ject. On most items, a pop-u...

39 After the unit has acquired a position: 1. Press WPT | ↓ to POI-R ESTAURANTS . 2. You could search the entire restaurant category, but in this examplewe will narrow our search. Press → to S UBCATEGORY column| ↓ to F AST F OOD C HAINS | ENT | ↓ to N EAREST | ENT . 3. The unit says it is calculatin...

40 POI information screen on fast food restaurant nearest this position. Screen shows name, street address, phone number, latitude/longitude, distance to restaurant and its compass bearing. Figure at left shows Go To Waypoint command; right figure shows Find On Map command. Map screen showing Findin...

41 To create and save a Waypoint: These first two techniques use the Quick Save method, the fastest andeasiest way to create a waypoint. Create Waypoint at Current Position While you are traveling, press WPT | WPT . The waypoint is saved and automatically given a name with a sequential number, such ...

42 Symbol is described in Sec. 4.) After you have changed a waypointsymbol, the unit will remember the one you chose and use it the next time you "quick save" a waypoint. To revert back to the default symbol, edit a waypoint and choose the original symbol, or use theReset Options command (de...

43 3. If the list is short, you can jump directly to the F IND I N L IST box by pressing ENT . Use ↑ or ↓ to select the waypoint name, press ENT and the waypoint information screen appears with the G O T O command selected. 4. To begin navigating to the waypoint, press ENT . Navigation Page, navigat...

44 Navigating to Man Overboard: Man Overboard Activated message, left, Navigation Page, center, Map Page, right. The victim is to the starboard of the vessel; the GPS shows which direction to steer to for the rescue. The man overboard position is also stored in the waypoint list for futurereference....

45 Navigate to cursor. In this example, the cursor has selected the town of Oologah, Oklahoma. 3. Press MENU | ENT and the unit will begin navigating to the cursor location. The Map Page will display a dotted line from your current position to thecursor position. The Navigation Page displays a compa...

46 The other method involves searching for POIs with the Find Waypointcommand, launched with the WPT key. (See the searching example ear- lier in this section, or turn to Sec. 6, Searching , for detailed instructions on POI searches.) After you have looked up an item with the Find Waypoint command,u...

47 To Save a Trail 1. Press MENU | MENU | ↓ to M Y T RAILS | ENT . Sequence for saving a trail and beginning a new one. My Trails com- mand (left). The Trails Menu (center). The arrow to the right of Trail 1 indicates the trail is active, and the check to the left indicates the trail is visible on t...

48 You can save and recall up to 10 different plot trails, which can also becopied to your MMC for archiving or for transfer to your MapCreatesoftware. Tip: Another quick way to stop recording one trail and begin a new oneis to use the New Trail command: Press MENU | MENU | ↓ to M Y T RAILS | ENT | ...

50 Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2, Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with Navigate command highlighted for Trail 6. A trail is always converted to a route when you navigate the trail. On the Map Page, the trail you are navigating is repr...

51 Navigate trail, map views: at left driver is northbound heading straight toward trail point 6. At right, northbound driver has reached point 6 and has turned west to follow trail. Navigate trail, navigation page (compass rose) views: at left, driver is northbound heading straight toward trail poi...

52 NOTE: If you are already located at or near the end of your trail, the arri-val alarm will go off as soon as you hit ENTER . Just press EXIT to clear the alarm and proceed. Transfer Custom Maps and GPS Data Files Custom Maps: Custom maps work only from the MMC card or SD card. When a cardcontaini...

53 2. The Transfer My Data menu includes a message which tells you if anMMC is present or not. If no MMC is present, you must first insert acard into the unit in order to activate the Load or Save commands. To transfer data from the unit to the MMC : press ENT (for S AVE .) To transfer data from the...

54 These figures show the menu sequence for loading a GPS Data File from an MMC into the unit's memory. Cancel Navigation You can turn off any of the navigation commands after you reach yourdestination or at any other time by using the Cancel Navigation com-mand. Press MENU | MENU | ↓ to C ANCEL N A...

55 Section 4: Advanced GPS Operations Find Distance From CurrentPosition to Another Location 1. While on the Map Page press: MENU | ↓ to F IND D ISTANCE | ENT . 2. Center your cursor over the position you want to find the distance to.A rubber band line appears, connecting your current position to th...

56 Icons Icons are graphic symbols used to mark some location, personal point ofinterest or event. They can be placed on the map screen, saved and re-called later for navigation purposes. These are sometimes referred to asevent marker icons. This unit has 42 different symbols you can pickfrom when c...

57 1. Press MENU | ↓ to D ELETE M Y I CONS | ENT . 2. Press ↓ to D ELETE A LL I CONS , D ELETE B Y S YMBOL , or D ELETE F ROM M AP and press ENT . Delete icons menu. The Delete All Icons command will ask if you are sure. Press ← to Y ES | ENT . All icons will be deleted from the map. The Delete by S...

58 The course from one waypoint to the next is a leg; routes are composedof one or more legs. The legs of all GPS routes are based on straightlines between waypoints. A route provides the automatic capability to navigate through severalwaypoints without having to reprogram the unit after arriving at...

60 Route creation sequence, continued: Fig. 4. Point (3) set at on-ramp turn. Fig. 5. Waypoint (4) set at highway exit to frontage road leading to river. Waypoint (5) ends the route at a tree stand in the hunting area. Fig. 6. Press EXIT to save the route and you return to this screen. 5. Move the c...

61 3. Press ↑ or ↓ to change the first character, then press → to move the cursor to the next character and repeat until the name is correct, thenpress ENT . Return to the previous page by pressing EXIT | EXIT | EXIT | EXIT . Edit Route Waypoints You can edit the route by adding and removing waypoin...

62 Selecting the Route Planning command on Main Menu brings up the Routes menu, left. Edit Route menu, right. Navigate command is se- lected in the Action box. 2. Press ↓ to select route name | ENT | ↓ to N AVIGATE | ENT . 3. Upon arrival at your destination, cancel navigation:press MENU | MENU | ↓ ...

63 Navigating along a route: Fig. 1 shows the Navigation Page at the startof a route, heading straight for the first waypoint (Wpt 1). In Fig. 2, thetraveler has arrived at Wpt 1; the arrival alarm has been triggered and the bearing arrow on the compass rose has turned to point toward Wpt 2, off to ...

64 Edit a Trail Name To edit a trail name: press MENU | MENU | ↓ to M Y T RAILS | ENT | ↓ to trail name | ENT | ENT . Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the name is correct. Press ENT then EXIT | EXIT | EXIT | EXIT to return to the previou...

65 At left, Edit Trail Menu with Pattern option selected. At right, edited trail with dotted line pattern. Utilities Utilities are useful tools for traveling or for outdoor activities. Alarm Clock To get to the alarm clock menu: press MENU | MENU | ↓ to T IMERS | ENT | ↓ to A LARM C LOCK | ENT . Sun...

69 Section 5: System & GPS Setup Options Alarms This unit has several GPS alarms. The factory default setting has all ofthese but the anchor alarm turned on. You can turn the alarms off andon and change their distance settings. You can set an arrival alarm to flash a warning message and sound at...

70 Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the name is correct. 4. When your adjustments are finished, return to the last page dis-played by repeatedly pressing EXIT . IMPORTANT ALARM NOTES: Anchor Alarm - The anchor alarm may be triggered even...

71 press ENT . Use the ↑ ↓ keys to select the first number, then press → to move to the next number. When the desired percentage has been en-tered, press ENT . 3. To enable the Empty Alarm, highlight the E MPTY A LARM Enabled box and press ENT to turn on (check) the alarm. Press → to the Percent box...

72 Main Menu, left, MMC File Browser, right. Communications Port Configuration The unit has one NMEA 0183 version 2.0 compatible communicationport, or com port for short. The Com Port Menu, which is accessed fromthe System Setup Menu, allows you to configure the communicationsport to send or receive...

73 Configure NMEA You can configure the unit to use specific NMEA sentences. 1. Press MENU | MENU | ↓ to S YSTEM S ETUP | ENT . 2. Press ↓ to C OMMUNICATIONS P ORT | ENT | ↓ to C ONFIGURE NMEA | ENT . 3. A menu appears showing the prefixes of the available NMEA sen-tences. A check mark next to a pre...

74 UTM's are marked on USGS topographic charts. This system dividesthe Earth into 60 zones, each 6 degrees wide in longitude. British, Irish, Finnish, German, New Zealand, Swedish, Swiss, Taiwan,and Greek grid systems are the national coordinate system used only intheir respective countries. In orde...

75 Map Fix Map Fix is used with charts or maps. This system asks for a referenceposition in latitude/longitude, which you take from a marked locationon the map. It then shows the present position as distance on the mapfrom that reference point. For example, if it shows a distance of UP 4.00" and...

76 Configure a map fix so the unit can find your position on a printed chart or topographical map. Press → to S ELECT O RIGIN | ENT | ENT | ENT to bring up the waypoint list. Select the waypoint that you saved the reference point under and press ENT . The unit displays a waypoint information screen ...

77 Customize Menu, with "GPS Data" and "Navigation" categories expanded. Selecting the category name and pressing ENT will show the category's contents, so you can choose items within it. An expanded category (onewith a "–" next to its name) can be collapsed to hide its conte...

78 GPS Simulator menu. Make the desired settings, then turn the simulator on by highlightingthe GPS S IMULATOR O N box and pressing ENT key. Press EXIT | EXIT | EXIT to erase this menu. A message and tone appear periodically, warningyou that the simulator is on. To turn the simulator off, repeat the...

79 Tip: You can pick any spot on the map to begin your simulation sessionby using the Initialize GPS command. This makes your unit thinkit's located at the position you select. See its entry following the en-try for Hide GPS Features . Initialize GPS This command is handy when you are practicing in ...

81 Map Overlays (Range Rings; Lat/Long Grid) The map screen can be customized with four range rings and/or gridsthat divide the plotter into equal segments of latitude and longitude. Range rings are handy for visually estimating distances on the map. Thering diameters are based on the current zoom r...

82 Map Datum Menu. Map Detail Category Selection This menu determines which of the mapping features are shown on thescreen. This includes, waypoints, trails, icons, cities, highways, etc. Youcan selectively turn on or off any of these items, customizing the map toyour needs. To get to Map Categories...

83 Map orientation at left is shown in north up and at right, track up. This is fine if you're always traveling due north. What you see to yourleft corresponds to the left side of the map, to your right is shown onthe right side of the map, and so on. However, if you travel any otherdirection, the m...

84 Map Menu, left; Map Orientation menu with the North Up map orientation option selected, right. NOTE: In North Up and Course Up, the present position arrow appears inthe center of the map page. In Track Up, the position arrow appearscentered in the lower third of the page. NauticPath  USA Marine ...

86 NauticPath chart showing Port Services icon selected by cursor. When first highlighted, the Pop-Up name box appears. The Port Services information screen for a NauticPath chart containsall the service information in one window. 3. To scroll through the service information window, use ↑ ↓ to see t...

87 animated arrow with a pop-up name box (the name box disappears af-ter a few seconds). Examples are displayed in the following figures. To view Tidal Current information: 1. Use the arrow keys to move the cursor over a Tidal Current Stationicon. When it is selected, a pop-up name box appears. 2. P...

88 Slack water, the period of little or no current, is represented by theSlack Water Line (SWL). The flood appears above the SWL and the ebbappears below the SWL. You can look up tidal current data for otherdates by changing the month, day and year selection boxes. To select another date: 1. Use ← →...

89 Tide Information screen. The Tide Information screen displays daily tidal data for this station onthis date at the present time. The graph at the top of the screen is anapproximate view of the tidal range pattern for the day, from midnight(MN) to noon (NN) to midnight (MN). The dotted line across...

90 To display a Navionics chart: 1. Install the Navionics MMC in the memory card compartment andturn on the unit. (For full card install instructions, see Sec. 2.) 2. From the Map Page, press MENU | ↓ to M AP D ATA | ENT | ↓ to M AP C HOICE | ENT . Select the Map Name , then press ENT | EXIT | EXIT ...

92 From Overlay Data Shown (left) press ENT to see Data Viewer (center). Select a category and press ENT ; then select information to float on screen and press ENT (right). To Remove overlaid data: 1. While on the Page that shows the item or items you want to remove,press MENU | ↓ to O VERLAY D ATA ...

94 System Setup menu, left, with Pop-up Help command highlighted. At right, this example shows the Pop-up Help message for the Go To Cursor command, located on the Map Menu. Reset Options To reset all features to their factory defaults: 1. Press MENU | MENU | ↓ to S YSTEM S ETUP | ENT | ↓ to R ESET ...

95 To adjust the display's contrast: The C ONTRAST slider bar is already selected. Press → or ← to move the bar. The left end of the scale is minimum contrast; the right end ismaximum contrast. Screen Command, left, and Screen Menu with Contrast bar selected, right. To adjust the display's brightnes...

96 1. Press MENU | MENU | ↓ to S YSTEM S ETUP | ENT . 2. Press ↓ to S ET L ANGUAGE … | ENT . 3. Use ↓ or ↑ to select a different language and press ENT . All menus now appear in the language you selected. Set Local Time Using the correct local time setting is handy when estimating local ar-rival tim...

97 you have the option of turning off the WAAS Acquired/Lost alarm with-out affecting how the unit uses WAAS. Here's how: 1. Press MENU | MENU | ↓ to GPS S ETUP | ENT | ↓ to S HOW WAAS A LARM . 2. With the option highlighted, press ENT to uncheck it (turn off) and check it (turn on.) After the optio...

98 Sounds command, left. At right, the Sounds menu. Once in the Sounds menu: To set Key Press Sounds: With the option highlighted, press ENT to check it (turn on) and uncheck it (turn off.) After the option is set, press EXIT | EXIT to return to the page display. To set Alarm Sounds: Press ↓ to A LA...

99 Track Smoothing option, turned on. Trail Options There are several options you can use with trails. Some affect all trails,other options can be applied to a particular trail. You can change theway trails are updated, display or hide trails, create a new trail, deletea trail, etc. General Trail Op...

101 Specific Trail Options Delete Trail To delete a specific trail: From the Trails Menu, press ↓ to Trail Name | ENT . The Edit Trail menu appears as seen in the following fig- ure. Press → to D ELETE T RAIL | ENT | ← to Y ES | ENT . Edit Trail menu. New Trail To manually start a new trail, in the ...

102 Main Menu with Transparency command selected To adjust Menu Transparency level: Press MENU | MENU | to T RANSPARENCY | ENT . The T RANSPARENCY slider bar appears. Press or to move the bar. The lower end of the scalemakes the menus opaque; the upper end is maximum transparency. Units of Measure T...

103 Sec. 6: Searching NOTE: The background map loaded in your unit lets you to search for U.S.Interstate Highway exits and exit services, as well as some landfeatures, including cities and lakes. For a full set of searchable landfeatures, including landmarks, streets, addresses and Points of In-tere...

104 3. To enter an address number , press ↑ or ↓ to change the first number, then press → to move the cursor to the next number and re- peat until the number is correct, then press ENT . Find Address Menu. 4. To enter a street name , press ↓ to S TREET | ENT . There are two op- tions: A. You can spe...

105 press → to move the cursor to the next letter and repeat until the name is correct, then press ENT | ENT . B. Jump down to the lower selection list by pressing ENT , then press ↓ or ↑ to select a city name from the list, then press ENT . The city name you selected is now in the city field. NOTE:...

106 8. To navigate to the address, press MENU | ENT | EXIT and the unit will begin showing navigation information to the address pointed out by thecursor. If you are only looking up an address (not navigating), justpress EXIT to return to the previous page. Tip: If the address also happens to be an ...

107 NOTE: Since the Go Waypoint command is highlighted, you can navigateto the selected POI by pressing ENT | EXIT while in the POI Way- point Information screen. Find Interstate Highway Exits 1. From the Map Page, press MENU | ↓ to H IGHWAY E XITS | ENT , which calls up the Find Exit menu. Find Hig...

108 3. Once you have selected a highway name you can then select an exit.Press ↓ to switch to the Exit List, then press ↓ or ↑ until you highlight the exit, then press ENT. Find Exit menu, with an exit selected in the Exit List. 4. In the Exit Information screen you have two choices. A. Press ENT to...

109 Exit Information screen, left; general location and amenities information, at right. Find Map Places or Points of Interest (POI) 1. Press WPT , press ↓ or ↑ to select a map place or POI category, then press ENT . (narrow your search, press → then press ↓ or ↑ to select a subcategory before press...

111 "Go To" POI option, left, "Find on Map" POI option, right. Find Streets or Intersections Find a Street 1. From the Map Page, press MENU | ↓ to F IND S TREETS | ENT and the Find Streets Menu appears. Find Streets command, left, Find Streets menu, right. 2. You must first fill in a...

112 Find Street By Name menu. Spell out name in the top box, or select from the list in the lower box. 3. The Find Streets menu reappears with the street you're searching forin the First Street box. (In this example, it's 80th Street.) To search forthat street, press ↓ to F IND F IRST S TREET | ENT ...

113 Map Page showing results of a street search. The cursor points to the located street. If you want to navigate to the found street at the cursor location, justpress MENU | ENT | EXIT . Find an Intersection You must enter one street in the First Street dialog box and enter thenext street in the Se...

114 second street. You could now use similar techniques to select a city orZip code, but your search will probably be faster if you leave thoseboxes blank. (You can specify a city and/or Zip code later on to narrowthe search, if the resulting list is too long.) Find Intersection command highlighted,...

115 Find Waypoints 1. Press WPT | ENT . 2. If searching for the waypoint By Name , press ENT . If searching for the Nearest waypoint, press ↓ to N EAREST |ENT . (To search by name, jump to step 5.) Find Waypoint menu, left; Find By Nearest command, center, Find by Name command, right. 3. If you're l...

116 B. To find the waypoint, press ↓ to F IND O N M AP | ENT . The Map Page appears with the cursor highlighting the found waypoint. Waypoint Information screens with the Go Waypoint command se- lected, left, and the Find on Map command selected, right. To clear these menus and return to the previou...

117 Sec. 7: Supplemental Material Datums Used by This Unit WGS 1984Default AdindanMean for Ethiopia,Sudan AdindanBurkina Faso AdindanCameroon AdindanEthiopia AdindanMali AdindanSenegal AdindanSudan AfgooyeSomalia Ain el Abd 1970Bahrain Ain el Abd 1970Saudi Arabia Anna 1 Astro 1965Cocos Islands Antig...

124 FCC Compliance This device complies with Part 15 of the U.S. Federal Communi-cations Commission (FCC) Rules. Operation is subject to the fol-lowing two conditions: (1) this device may not cause harmful in-terference, and (2) this device must accept any interference re-ceived, including interfere...

126 DATABASES LIMITED WARRANTY "We", "our", or "us" refers to Lowrance Electronics, Inc., the manufacturer ofthis product. "You" or "your" refers to the first person who purchases the prod-uct as a consumer item for personal, family, or household use. The Data...

127 LOWRANCE ELECTRONICS FULL ONE-YEAR WARRANTY "We," "our," or "us" refers to LOWRANCE ELECTRONICS, INC., the manufacturer ofthis product. "You" or "your" refers to the first person who purchases this product as aconsumer item for personal, family or househol...

128 How to Obtain Service… …in the USA: We back your investment in quality products with quick, expert serviceand genuine Lowrance parts. If you're in the United States and youhave technical, return or repair questions, please contact the FactoryCustomer Service Department. Before any product can be...

Accessory Ordering Informationfor all countries To order Lowrance GPS accessories, please contact: 1) Your local marine dealer or consumer electronics store. Most quality dealers that handle marine electronic equipment or other consumerelectronics should be able to assist you with these items. To lo...