LOREX QLR-0440 Series - Manual

- 7 - SECTION 2 - INSTALLATION INSTRUCTIONS Hardware Installation Before installing the VISTAPRO software, you must first connect the 4 Port PCI card and optional Alarm I/O Board (ACC-ALM) into your PC. The 4 Port PCI card has 4 Video inputs, allowing you to connect up to 4 cameras to your system. T...

- 13 - Driver Installation * The screenshots shown below are taken from Windows 2000 and may vary slightly depending the Operating System 1. When you boot your computer after you have inserted the DVR cards to the PCI slot, Windows will automatically detect the existing card and the following messag...

- 17 - SECTION 3: USING THE SERVER APPLICATION 1. Main Application Window When entering the Server Program, the main interface screen will open as shown below. There are several view modes for efficient monitoring such as single screen, division screen, and auto switching modes. Pan/Tilt/Zoom Contro...

- 18 - 2. Overview of Window Components System Status The following information is provided in this window: • Current Date and Time • The percentage of Hard Drive used. The icon indicates that Hard Drive overwrite is enabled. • The client connection status. Double clicking here allows you to view th...

- 20 - SECTION 4: SYSTEM SETUP This section will illustrate the configuration options offered by the VISTAPRO Server ’ s Setup dialog. These options include changing passwords, scheduling recordings, programming motion detection, and much more. 1. Entering the Setup Mode: Click the Setup button ( ) ...

- 25 - 4. Schedule Recording Options Camera select : Select a camera to setup a Recording Schedule. If you click ‘All Camera’, the Recording Schedule is applied to all cameras. Record mode : Appoint the time by dragging on the timetable and click a record mode. Then, the selected record mode is assi...

- 26 - 5. Motion Detect Setup Camera select: Select a camera to setup. For each camera: Region Viewer : On this viewer, you can set the region and test. The active region is shown with a red grid. Sensitivity : Setup the sensitivity of brightness in the motion-detection region. Min. detect area : Se...

- 28 - 7. Speaker and Relay Setup Speaker out: Speaker out Enable : If checked, the speaker output is enabled. Wave file : Setup the wave file for speaker output. (Use ‘Play’ to hear the file in advance.) Working time : Schedule the time frame during which the speaker will be able to activate. Alarm...

- 32 - SECTION 5: SEARCHING FOR VIDEO The Search Mode is divided into two modes - Local Search and Remote Search. The Local Search mode retrieves video stored locally on the machine running the Server program. The Remote Search mode enables searching of the recorded data on the DVR Server system via...

- 37 - SECTION 6: REMOTE CLIENT SOFTWARE The Client software allows for remote surveillance of the DVR via LAN, Internet, or Dial-up. 1. Introduction to the Client Window Open the DVR Client program by double-clicking the DVR Client icon ( ) on the desktop The functions/controls within this window a...

- 39 - 2. Connecting to the DVR Server Clicking the ‘Connect’ button ( ) on the main screen of the Client application opens the ‘Remote connection’ window below. Server Information: Select the server to connect to. This shows the servers registered in Local setup User Information: Enter the User ID ...

- 46 - 4. Remote Search Mode * During a Remote Search session, the Setup ( ), Bookmark ( ), Panorama ( ), and Store to AVI ( ) buttons are disabled, while the Local Search & Download buttons are enabled . (1) Network Setup for remote searching Click the ‘Setup’ button ( ), to open the Setup Dial...

- 51 - APPENDIX B: External Sensor and Relay Installation (1) Selection of sensor type Choose Anode type (When it works, 0 ohm is remained) as a sensor and NO type (Normal Open type. When it works, 0 ohm is remained) as a Relay. (2) Required Specification of Sensor connecting wire Connection wire th...

It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades Lorex Technology I nc. VISIT www . lorexcctv.com www.lorexcctv.com