LOREX L20WD800 Series - Manual

5 General Precautions FCC CLASS B NOTICE Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation....

6 LCD/DVR COMBO FEATURES LCD/DVR COMBO FEATURES Monitor • 20.1” Wide screen LCD with user selectable aspect ratio (Wide 16:9, Standard 4:3) • Professional Grade High Resolution (1680x1050) Glossy LCD panel • VGA Input - use your LCD Display as a PC monitor • USB picture frame feature - display digit...

7 Table of Contents Table of Contents Getting Started .......................................................................................... 9Tips & Tricks - Useful System Information .............................................. 10 System Loading Sequence .....................................

8 Table of Contents Table of Contents MODE 2: VGA Mode VGA Mode (Mode 2) ...................................................................... 61VGA Mode - Remote Control Usage ............................................. 62 MODE 3: Component Mode Component Mode (Mode 3) .............................

9 Getting Started Getting Started The system comes with the following components: * HARD DRIVE SIZE AND CAMERAS VARY BY SPECIFIC MODEL. PLEASE REFER TO YOUR PACKAGE FOR CONTENT DETAILS. CHECK YOUR PACKAGE TO CONFIRM THAT YOU HAVE RECEIVED THE COMPLETE SYSTEM, INCLUDING ALL COMPONENTS SHOWN ABOVE. RE...

10 Tips & Tricks - Useful System Information Tips & Tricks - Useful System Information The following Tips & Tricks contain useful information about your System: • Your default System Password is 1234 . This password may be required when entering menus, reviewing Recorded Data, Archiving,...

11 Tips & Tricks - Useful System Information Basic System Setup The following connections are recommended prior to loading the System for the first time.

12 Tips & Tricks - Useful System Information System Startup / Shutdown System Loading Sequence • Press the POWER button located on the front panel of the System to start the unit, or press the Power Button on the Remote Control. • The System will perform a Hard Drive check The unit will initiall...

13 Front Panel Front Panel 1. SYSTEM POWER BUTTON - Press the System Power button to turn the Monitor display ON/ OFF. Press and hold the button to turn the DVR ON/OFF. 2. MULTI-FUNCTION MENU MODES - Press the Multi-Function Menu button to switch between monitor modes: • DVR Mode - Displays the DVR ...

15 Rear Panel Rear Panel 1. 6 PIN DIN VIDEO INPUTS - Channel 1-4 Camera inputs (for cameras with 6 Pin DIN connections). Cameras with 6 Pin DIN connections draw power from the System - additional power adapters are not needed. 2. BNC VIDEO INPUTS - Channel 1-8 camera inputs (used to connect Cameras ...

16 Rear Panel Rear Panel 10. SPOT OUT - Video Output port to connect the unit to a Monitor or TV. This feature is used for situations in which you want to have the system in a back room while still displaying images to the public eye, for theft deterrence or advertising purposes. 11. AUDIO OUT - Aud...

17 Camera Installation Camera Installation Before you install the camera, carefully plan where and how you will position the camera, and where you will route the cable that connects the camera to the System. Installation Warnings: • Select a location for the camera that provides a clear view of the ...

18 Camera Installation Connecting DIN Cameras 1. Connect the female end of the supplied DIN extension cable to the camera. NOTE: Confirm that the arrows on the DIN Camera Cable and the DIN Extension cable are pointed together when connecting the cable. If the pins in the DIN Cable are bent, the Came...

19 Camera Installation Connecting BNC Cameras 1. Connect the Extension cable to the Camera and System: A. Connect the Barrel Power connector to a power adaptor. B. Connect the BNC connector to an available BNC Port of the System. C. Connect the Male Power connector to the Camera. D. Connect the BNC ...

20 Multi-Function Display - Monitor Modes Multi-Function Display - Monitor Modes This system contains a multi-function display, which allows the system to function in several modes: • Mode 1: DVR Mode - Displays the DVR with live camera view. • Mode 2: VGA Mode - Displays the device connected to the...

22 DVR Mode - Remote Control Usage DVR Mode - Remote Control Usage 1 2 11 12 13 1. Mode 3. DVR Mode 2. Power 12. Remote Control ID 13. Picture Frame Mode 14. Component Mode 3 4 5 6 7 10 14 16 17 18 19 20 21 22 8 9 15 4.VGA Mode 6. Navigation Controls 5. Return Button 15. Enter Button 16. Display Mod...

23 Front Panel Navigation Controls Front Panel Navigation Controls This System has been designed to use the Mouse or Remote Control as the primary modes of navigation and configuration for the system. The Front Panel buttons can also be used to access the menus and configure the system. • Navigation...

24 On-Screen Display Menu On-Screen Display Menu The On-Screen Display Menu is accessed by either: • Pressing the Up or Down Arrows on the Front Panel • Right Clicking the Mouse The Menu options include: 1. CHANNELS: Select a Channel Number (1~8) to display a camera in Full Screen Mode. 2. SETUP : D...

25 System Display System Display Network Connectivity Indicators The Network Indicators appear when a remote connection is made to the unit via the Remote Agent software, or through the Internet Explorer Web Client: • Green: Indicates that the network connection is stable. • Blue: Indicates that the...

26 System Display Camera Display Modes A Display Selection window will appear onscreen. Select from the available display types: Zoom Mode • Displays the Camera in ZOOM Mode. • Use the Arrow keys to adjust the Zoom location. • Press the Return key to exit ZOOM Mode. Single Channel Quad (4) Channel 6...

27 System Display PIP Mode (Reverse PIP) When using the PIP function when viewing in DVR MODE, it is referred to as ‘Reverse PIP’ (as normal PIP means displaying the DVR Screen as a PIP on any other mode). Select the PIP Button to display the VGA or Component mode in a PIP window. This function coul...

28 Menu Navigation Controls & Tips Menu Navigation Controls & Tips YOUR SYSTEM PASSWORD IS: 1234 Virtual Keyboard Control The Virtual Keyboard control becomes available when keyboard input is needed for entering information such as Names, Network Information, etc. • Includes a~z, A~Z, 0~9 an...

29 System Setup Controls System Setup Controls • Enter the MENU screen by pressing the SETUP button on the Remote Control, by pressing the SYSTEM MENU button on the Front Panel or by selecting SETUP from the Mouse Menu. Enter the password (if required). The default password is 1234 • Select the SYST...

30 Display Menu OSD (Onscreen Display) • Status Bar - Turns the status bar ON/ OFF. The status bar displays: z Recording State (Recording: Red, Pre-recording: Green) z Network Indicators z Time and Date z % HDD Free z Refer to Recording Settings on page 50). • Camera Title - Turns the display of the...

31 Display Menu SEQUENCE Sets the Sequence Mode for the display of available channels. The Sequence Settings for camera views can only be changed using the Mouse or Remote Control. • Activation - Turns the Sequence ON/ OFF. NOTE : Up to 16 different Sequence Mode settings can be configured, however ...

32 Display Menu Once the New Sequence has been created, the Sequence Setup Mode screens appear. These screens will set the sequence patterns (see the following for details). Modifying a Sequence • An existing Sequence can be Modified by selecting it from the list, and pressing ENTER. Once changes ha...

33 Display Menu 6. Press the SEQUENCE button on the Remote or Mouse Menu to switch to Sequence display. 5. Press the RETURN button when complete. and select SAVE & EXIT. 1. Double Left Click on the Green Highlighted box. The Highlight will change to YELLOW - Setup Mode is now active. SEQUENCE SE...

34 Display Menu • Check or Uncheck the selected Cameras to have the video sent to a Secondary Monitor in Sequence. NOTE : Any cameras NOT selected will not be sent as video to the Spot Out Monitor. SCREENSAVER • Auto Brightness - Sets the length of time before the Screen brightness is turned down (1...

35 Camera Menu CAMERA TITLE • Covert - Turns the onscreen display of the Camera ON/OFF. Covert Cameras continue to record, however the camera is not displayed onscreen. This feature is commonly used in situations where the Monitor is located in a public area, and a camera should not be displayed (i....

36 Camera Menu PTZ SETUP PTZ Setup is for PTZ Type Cameras ONLY, which are not included with this system. For more information on PTZ Cameras, visit us on the web at http://www.lorexcctv.com. • Address - Select the physical address setting of the PTZ Camera DIP Switches (From 0~255, refer to the Cam...

37 Camera Menu MOTION SENSOR • Sensitivity - Controls the Motion Sensitivity for the individual camera between 1 (low) ~ 10 (high). • Area Setup - Opens the Area Setup for the camera: PTZ PROPERTIES • Channel No. - Camera Number. • PTZ Driver - The compatible driver selected for the PTZ Camera. • Au...

38 Sound Menu Sound Menu The System Sound settings: AUDIO - Settings for the system Audio for Live and Remote monitoring. BUZZER - Settings for System Buzzer (audible alerts). SOUND The Sound Menu controls the Live Audio and Network Audio transfer. SOUND • Live Audio - Turns Live System Audio (from ...

39 System Menu DATE/TIME • Date/Time - Sets the current system Date and Time.* • Date Format - Sets the Date Display format (MM-DD-YYYY, YYYY-MM-DD, etc.). • Time Format - Sets the Time Display format to either 12 or 24 hour display. • Network Time Server Setup - Synchronizes the system to the speci...

40 System Menu NETWORK • DHCP (Dynamic Host Configuration Protocol) - Allows the System to receive Network Information from the DHCP Server (i.e. The local Router). z If DHCP is set to ON, the IP Address, Gateway and Subnet Mask will be assigned by the DHCP Server (i.e. The local area network Router...

42 System Menu System Information Screen • IP Address - Displays the IP address assigned to the System. • MAC Address - Displays the unique MAC address assigned to the unit. This address is hard coded to the unit and cannot be changed. • Disk Capacity - Displays the Total Hard Drive space, and the a...

44 System Menu z If the device is not detected, a message will indicate that No storage device was found. • Insert the Memory stick into the System and select the Load option to restore settings. This is recommended after initial setup and installation is complete. CONTROL DEVICE Used with an extern...

47 Disk Management EMAIL NOTIFICATION Sends an email to the specified users when the following events occur: • Notification - Sets the E-Mail notification ON/OFF. • HDD Event - A notification is sent if a Hard Drive event is detected (set to ON/OFF). • Notifications can be enabled for each channel f...

48 Disk Management • Format - Erases all Hard Drive data: z Press start button. A warning message will be displayed with the prompt ‘All Recorded Data will be erased.’ z Select OK to erase the data, or CANCEL to return without erasing the Hard Drive. • Once OK is selected, the user will be prompted ...

49 Recording Menu Controls Recording Menu Controls • Enter the RECORDING MENU screen by: z Pressing the SETUP button on the Remote Control z Pressing the SETUP button on the front panel, or z Selecting the SETUP option from the On-Screen Menu. Enter the password if required using the Virtual Keyboar...

50 Simple Recording Mode Once the settings have been changed, a status window will appear indicating that the changes have been saved. Choose the OK button to close the status window and return to the Main Menu. To return to the Record Menu, select the Record Menu button from the Main Menu selection...

51 Simple Recording Mode Simple Recording Mode Select a single or multiple time blocks: • Mouse Control : Click a single block to open the Recording Type Menu. Click and Drag a block of times to configure multiple channels and times at once. • Remote Control & Front Panel : Navigate to the Chann...

52 Advanced Recording Advanced Recording Continuous / Motion Setup The Continuous/Motion Setup section controls the Recording settings for each camera individually (quality, resolution, frame rate and audio). Both Continuous (constant recording) and Motion (recording when motion has been detected by...

53 Advanced Recording Continuous / Motion Schedule Sets the Time or Motion recording for each channel (by hour). Select single or multiple time blocks: • Mouse Control : Click a single block to open the Recording Type Menu. Click and Drag a block of times to configure multiple channels and times at ...

54 Advanced Recording Advanced Recording Alarm Setup Mode The Alarm Setup section controls the Recording settings for each camera individually (quality, resolution, frame rate and audio). Recording Settings for external alarm detection are set in this menu. • PARAMETER MODE - Contains the general re...

55 Advanced Recording Alarm Schedule Sets the Alarm Recording for each channel (by hour). Select single or multiple time blocks: • Mouse Control : Click a single block to open the Recording Type Menu. Click and Drag a block of times to turn Alarm Recording ON or OFF. • Remote Control & Front Pan...

56 Archiving Archiving The Archive feature copies data from the Hard Drive to a USB backup media (such as a Memory Stick or USB Hard Drive), optical drive (CD-RW / DVD-RW) or FTP.‘ NOTE : Make sure that you have removed all data from the USB device prior to backup. • Enter the ARCHIVING screen by pr...

57 Archiving Archiving Options Once the Start Time, End Time and Channel Selections have been completed, select the START Button A Drive Usage report will be displayed including Amount of space (in MB) needed, Start and End Times for Each Channel, with size of recordings (in MB) and Size of the Log ...

58 Archiving Archive Backup to FTP A schedule for data backup to a local or remote FTP can be configured on the System. 1. Choose FTP from the ‘Select Device’ dropdown menu. 2. Press the FTP Button to access the FTP Settings: • User ID: Enter the User ID used to log into the FTP site. • Password: En...

59 Search Search Search mode allows you to locate previously recorded video by Date and Time, or by Event Type. • Press the Search Button on the Remote Control or Mouse Menu. • Enter the User Name and Password (if required). • Use the Left / Right arrows on the Remote Control, or click with the mous...

60 Search Search By Event Searches the system based on Event Type (Alarm, Motion, Continuous or System). • Press the right arrow button on the front panel or remote control to access the Search By Event screen. • Select From and To dates, Events (Alarm, Continuous, Motion and Other) and Cameras • Na...

61 VGA Mode (Mode 2) VGA Mode (Mode 2) VGA Mode is used to display a device (i.e. a Computer) connected to the VGA Port on the monitor. To view a Computer using the Monitor: 1. Connect the PC to the Monitor using a VGA Cable. NOTE: VGA Cable is not included with the system. 2. Switch the Monitor to ...

62 VGA Mode - Remote Control Usage VGA Mode - Remote Control Usage Listed below is a quick reference for the Remote Control usage in VGA Mode. 1 2 8 9 1. Mode 3. DVR Mode 2. Power 9. Picture Frame Mode 10. Component Mode 3 4 5 7 10 12 11 4.VGA Mode 6. Navigation Controls 5. Return Button 11. Enter B...

63 Component Mode (Mode 3) Component Mode (Mode 3) Component Mode is used to display a device connected to the Component green, blue, and red inputs (Y/Pb/Pr) in high resolution (i.e. DVD Player, Set Top Box or Satellite Receiver). The Audio from the Component Device is connected to the Red and Whit...

64 Component Mode - Remote Control Usage Component Mode - Remote Control Usage Listed below is a quick reference for the Remote Control usage in Component Mode. 1 2 8 9 1. Mode 3. DVR Mode 2. Power 9. Picture Frame Mode 10. Component Mode 3 4 5 7 10 12 11 4.VGA Mode 6. Navigation Controls 5. Return ...

65 Picture Frame Mode (Mode 4) Picture Frame Mode (Mode 4) Picture Frame Mode is used to display JPG images located on a USB Thumbstick (connected to a USB Port on the side of the monitor). To view a JPG Images using Picture Frame Mode: 1. Connect a USB Thumbstick containing JPG images to the Monito...

66 Picture Frame Mode - Remote Control Usage Picture Frame Mode - Remote Control Usage Listed below is a quick reference for the Remote Control usage in Picture Frame Mode. 1 2 7 8 1. Mode 3. DVR Mode 2. Power 8. Picture Frame Mode 9. Component Mode 3 4 5 9 11 10 4.VGA Mode 6. Navigation Controls 5....

67 Picture Frame - Menu NOTE : To display the Picture Frame menu, press the MENU Button on the front panel of the System or on the Remote Control. Picture Frame Settings Menu • Device : Displays information about the currently connected Image Device (USB Thumbstick). • Dwell Time : Set the time for ...

68 Picture Frame - Menu Picture Resizing Application An application has been included on the Software CD to resize your JPG images to 1600x1200 (highest recommended size), and save them directly to the USB Thumbstick. 1. Launch the application from the Software CD. The Picture Resize window will be ...

70 Installation Guide Mode - Remote Control Usage Installation Guide Mode - Remote Control Usage Listed below is a quick reference for the Remote Control usage in Installation Guide Mode. 1 2 6 1. Mode 3. DVR Mode 2. Power 6. Picture Frame Mode 7. Component Mode 3 4 5 7 4.VGA Mode 5. Volume +/- 1. M...

71 Monitor - Menu Settings Color Submenu • Auto Color : Select Auto Color to allow the system to set the color of the monitor. Select YES to allow the system to set the color, or NO to exit. • Color Temperature : Set the Red, Green and Blue Values using the arrow keys. • sRGB : Set the sRGB to ON or...

72 Monitor - Menu Settings Display Settings Use the Arrow keys on the Front Panel or Re-mote Control to select from Auto Configura-tion, Phase, Clock or Highlight Window. Use the enter key to access the Display Control or Scheme submenus. Change the values us-ing the arrow keys and enter. • Auto Con...

73 Monitor - Menu Settings PIP Settings Use the Arrow keys on the Front Panel or Re-mote Control to select from PIP, PIP Input Select, PIP Size and Blend. Use the enter key to access the PIP Position or Pip Color Control submenus. Change the values using the arrow keys and enter. • PIP : Turns the d...

74 Monitor - Menu Settings Misc. Settings Use the Arrow keys on the Front Panel or Re-mote Control to access the OSD Configura-tion or VGA Factory Reset submenus. Change the values using the arrow keys and enter. PIP Position Submenu Use the Up, Down, Left and Right arrows to adjust the settings. Pr...

75 System Specifications - Appendix #1 System Specifications - Appendix #1 Monitor Specifications • 20.1” Wide screen LCD with user selectable aspect ratio (Wide 16:9, Standard 4:3) • Professional Grade High Resolution (1680x1050) LCD panel • VGA Input - use your LCD Display as a PC monitor • USB pi...

78 Setting up Remote Viewing - Appendix #3 Setting up Remote Viewing - Appendix #3 Setting up the Remote Viewing Feature requires several steps. Networking skills are required to correctly configure the remote viewing functions. What do you need? • The LCD/DVR System. • A PC with the installed with ...

79 Setting up Remote Viewing - Appendix #3 Network Checklist The following checklist is provided to assist you in confirming that all steps have been successfully performed during Network Setup. Use this checklist in conjunction with the steps outlined on the following pages. 1. I have the following...

82 Setting up Remote Viewing - Appendix #3 Network - Router Port Forwarding You will need to enable port forwarding on your Router to allow for external communications with your System for ports: • TCP/IP PORT 6100• WEB PORT 80 Computers, Systems, and other devices inside your network can only commu...

83 Setting up Remote Viewing - Appendix #3 Network - Setting Up Your DDNS Account Lorex offers a free DDNS service for use with your System. A DDNS account allows you to set up a web site address that points back to your Local Network. The following outlines how to set up your free DNS account. 1. N...

84 Setting up Remote Viewing - Appendix #3 NOTE : Make sure to write down your information BEFORE clicking on the Create New Account link. This information is important for your System Setup. 5. Click the Create New Account link at the bottom of the form to submit your request. 6. Your Account infor...

86 Setting up Remote Viewing - Appendix #3 2. Log into the Lorex DDNS Website at http://www.lorexddns.net and enter your Username and Password. Click the ACTION button located on the console to display a copy of the Configuration email:

88 Setting up Remote Viewing - Appendix #3 Lorex Client 4.0 Software - Connection Manager The Connection Manager contains the setup information to allow the user to remotely connect to the System. Adding a Group Group - Right click on ‘Site’ to add a New Group. A group can represent one or more Syst...

90 Setting up Remote Viewing - Appendix #3 Lorex Client 4.0 Software - Remote Connection Once the site setup profile has been created, a connection can then be made to the System: 1. Select the Site profile from the Dropdown List. 2. Press the CONNECT button. The Connection Status window displays th...

91 Using the Auto Email Feature - Appendix #4 Using the Auto Email Feature - Appendix #4 Setting up Email This System has the ability to automatically send email when an event is detected. To configure the automatic sending of Emails, the following Menu option setup is required: • System Menu - Mail...

92 Using the Auto Email Feature - Appendix #4 This is an example of the same type of required settings (formatted for Microsoft Outlook). NOTE : This example is not required for the System to function correctly. This is used to illustrate the required settings (using another program). Testing the Ma...

93 Using the Auto Email Feature - Appendix #4 System Menu - Mail Navigate to the System Menu, and select the Mail Option. New users can be added to the System through the User Management screen, and existing users can be edited. The important features in the User Setup are the E-Mail address and E-M...

94 Using the Auto Email Feature - Appendix #4 Event / Sensor - E-Mail Notification Navigate to the System Menu, and select the Mail Option. • NOTIFICATION - Notification must be turned on for Automatic E-mail alerts to be sent. • HDD EVENT - Emails a notification to all active accounts when problems...

95 Recommended Tips for System Setup - Appendix #5 Recommended Tips for System Setup - Appendix #5 There are several tips outlined below that will assist you in setting up your system: Connecting and Mounting Cameras: 1. Connect the DIN Extension Cable to an open channel port on the back of the Syst...

96 Recommended Tips for System Setup - Appendix #5 Navigating within the System Menu (cont.) Menu Navigation Controls This System has been designed to use the Mouse or Remote Control as the primary modes of navigation and configuration for the system. The Front Panel buttons can also be used to acce...

97 Recommended Tips for System Setup - Appendix #5 Changing the Date and Time Setting the correct date and time for your system is important. Once the date and time have been set correctly, it is highly recommended that you format your Hard Drive. 1. Enter MENU mode by pressing the MENU button on th...

98 Recommended Tips for System Setup - Appendix #5 Formatting the Hard Drive Formatting the hard drive after changing the date, and before beginning the recording of YOUR data is recommended, as the system is set to Automatically start recording when powered on (continuous recording setting). NOTE: ...

99 Recommended Tips for System Setup - Appendix #5 Camera Setup Each camera should be assigned a name that corresponds to its use (i.e. Dock1, BackDoor, Cash3, etc.). This name is displayed onscreen, and helps to identify the camera location easily. 1. Enter MENU mode by pressing the MENU button on ...

100 Recommended Tips for System Setup - Appendix #5 Screen Saver Settings The screen saver will black the screen during a defined interval. 1. Enter MENU mode by pressing the MENU button on the front panel of the system, Remote Control or Mouse Menu. Select the SYSTEM SETUP Option. 2. Select the DIS...

101 Recommended Tips for System Setup - Appendix #5 Backing up your System Configurations it is recommended to back up your system configurations to a Memory Stick. Configuring your system to meet your specific needs can be time consuming - having a backup of your settings will allow you to reset yo...

102 Listen-in Audio - Appendix #6 Listen-in Audio - Appendix #6 There are 4 available DIN camera ports, 8 available BNC camera ports and 4 BNC Audio ports on the system - how many can be used for Listen-In audio, and how many can be used to record sound? How do I enable Listen-In Audio, and how do I...

103 Playback Previously Recorded Data? - Appendix #7 Playback Previously Recorded Data? - Appendix #7 The Date and Time will be displayed at the bottom of the screen. A playback icon will appear indicating that the unit is in Playback mode. Any days highlighted with GREEN indicate that there is reco...

105 Setting Auto-Recording to OFF - Appendix #8 Setting Auto-Recording to OFF - Appendix #8 The system is set to automatically start recording when powered on. You may wish to change these settings to better suit your security needs. These settings can be changed for an individual camera on one time...

106 Setting Auto-Recording to OFF - Appendix #8 Setting Multiple Time Blocks 1. Enter MENU mode by pressing the MENU button on the front panel of the system, remote control or mouse menu. Select the RECORD MENU Option. 2. Select the SIMPLE RECORDING MODE menu. Navigate using the up and down arrows o...

107 Setting up Motion Recording - Appendix #9 Setting up Motion Recording - Appendix #9 The system is set to automatically start recording when powered on in Continuous Mode. You may wish to change these settings to better suit your security needs by having the cameras start recording when MOTION is...

108 Setting up Motion Recording - Appendix #9 7. The Schedule Window will be displayed, with the Motion Time blocks displayed as highlighted boxes. 8. Press the Return Button several times to exit the Recording Menus. Remember to SAVE YOUR CHANGES ! To check if the unit is recording in Motion, all c...

109 Setting up Motion Recording - Appendix #9 Motion Area Setup Use the System menu to configure the Motion Detection areas. Setting the motion detection areas are useful to mask in specific areas (i.e. Doors or Windows), so when movement is detected in these areas the System Recording will begin. T...

110 Using the Storage Calculator - Appendix #10 Using the Storage Calculator - Appendix #10 The Storage Calculator application is used to calculate the amount of recording time available on your Hard Drive, based on the System Recording Settings. This application is located on the Software Installat...

111 Hard Drive Replacement - Appendix #11 Hard Drive Replacement - Appendix #11 The System comes with a pre-installed Hard Drive, however the unit will work with a replacement single Hard Drive (up to 750GB). NOTE: Make sure that the System is OFF and the power cable has been disconnected before cha...

112 Hard Drive Replacement - Appendix #11 New Hard Drive Format The New Hard Drive MUST be formatted. If a new HARD DRIVE is detected, the system will prompt you to FORMAT the drive. If you do not choose to format the HARD DRIVE, the drive will not be detected by the system. If you choose to FORMAT ...

114 Connecting Motion / Alarm Device - Appendix #13 Connecting Motion / Alarm Device - Appendix #13 Motion detection and Alarm controls are enabled through the Menu system on the System. Additional motion sensor devices can be connected to the system (Motion Sensors, Door/Window Sensors). A motion d...

117 Optional Accessories Optional Accessories The following accessories are available to add to your existing system: TO ORDER THESE ITEMS, AND FOR A COMPLETE LISTING OF AVAILABLE PRODUCTS, PLEASE VISIT US ON THE WEB AT HTTP://WWW.LOREXCCTV.COM

It’s all on the web Product Information User Manuals Quick Start Guides Specification Sheets Software Upgrades Firmware Upgrades Lorex Technology Inc. VISIT www.lorexcctv.com www.lorexcctv.com