Linksys SPA922 - Manual

2 Chapter 1: IntroductionIP Telephony System Overview SPA IP Phone IP Telephony System Overview While your phone has traditional features, it uses the Voice over Internet Protocol (VoIP) for communications with other phones. Your phone is based upon industry standard VoIP and will work with Session ...

3 2: InstallingAssembling the Phone and Connecting to the Network SPA IP Phone Chapter 2: Installing NOTE: Before you can install the phone, your system administrator must prepare the network. If a technician is not installing your phone, verify with your System Administrator that the network is rea...

4 2: InstallingAttaching the Desk Stand SPA IP Phone Attaching the Desk Stand 1 Complete the assembly instructions (page 2). 2 Line up the tabs on the desk stand with the slots on the back of the phone. 3 Slide the bottom tabs into the slots 4 Lightly press down on the top of the desk stand. It shou...

5 2: InstallingTurning on the Phone SPA IP Phone IP Phone SPA942 Turning on the Phone This section assumes that the correct connections have been made. Plug in the AC power adapter to an electrical outlet. Use only the adapter that came with the phone. • The phone will execute a boot-up sequence whe...

6 Chapter 3: Using Your PhoneUsing the Handset, Speakerphone or Headset SPA IP Phone Chapter 3: Using Your Phone The phone can be used as soon as it is operational (see Chapter 2, Installing). To customize the phone options, see Setup later in this chapter. Using the Handset, Speakerphone or Headset...

7 Chapter 3: Using Your PhoneLinksys SPA921, SPA922, SPA941 and SPA942 Basic buttons SPA IP Phone Linksys SPA921, SPA922, SPA941 and SPA942 Basic buttons Table 1: Basic Feature Buttons Feature Description Navigation button Allows you to navigate (left, right, up, down) through the soft button featur...

8 Chapter 3: Using Your PhoneBasic Soft button features SPA IP Phone Basic Soft button features The soft buttons below the LCD screen allow you to easily select phone functions. For basic soft button feature definitions, see the table below. Other buttons are explained in the Setup section of this c...

9 Chapter 3: Using Your PhoneMaking Telephone Calls SPA IP Phone Making Telephone Calls NOTE: You may need to dial an access code to reach an outside line. Talk to your Phone Administrator about your company’s specific dialing rules/plan. Using a Telephone Number You can place a call by: • Lifting t...

11 Chapter 3: Using Your PhoneThree Way Conference Calls SPA IP Phone Resume the 1 st call by pressing the line button associated with the 1 st call. If the 2 nd call is still in progress it will automatically go into a “hold” state when the 1 st call goes active. Three Way Conference Calls To initi...

12 Chapter 3: Using Your PhoneEnding a Call SPA IP Phone You will be disconnected from the call. If you hang up before the second call is ringing, the blind transfer will fail and the first person will be disconnected. NOTE: For SPA941 and SPA942, if you misdial when calling the second number, press...

13 Chapter 3: Using Your PhoneSetup SPA IP Phone Setup Customize the phone ysing the Setup options, at any time. Access this menu by pressing the Setup button on the phone. The table below describes all of the possible soft button features. Not all choices are available for every setup option. Table...

25 Appendix B: Contact Information SPA IP Phone Appendix B: Contact Information Need to contact Linksys?Visit us online for information on the latest products and updates to your existing products at: http://www.linksys.com or ftp.linksys.com Can't find information about a product you want to buyon ...