Page 10 - Preface; Document Audience
ix Linksys IP Phone Administrator Guide Firmware Version 5.1 Preface Document Audience Preface This guide describes administration and use of the Linksys Voice System (LVS) IP phones. This preface describes: • Document Audience, page ix • How This Document is Organized, page x • Related Documentatio...
Page 11 - How This Document is Organized; Technical Support
x Linksys IP Phone Administrator Guide Firmware Version 5.1 Preface How This Document is Organized How This Document is Organized Related Documentation The following documentation provides additional information about Linksys IP phones: • SPA IP Phone User Guide • SPA IP Phone Quick Reference Guide ...
Page 12 - Introducing Linksys IP Phones; Overview
1-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Overview 1 Introducing Linksys IP Phones This chapter introduces the functionality of the Linksys 900 Series IP phones and includes the following: • Overview, page 1-1 • Linksys IP Phone Features, p...
Page 13 - Linksys IP Phone Features
1-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Linksys IP Phone Features Figure 1-1 Linksys IP Phones in a VoIP Network Linksys IP Phone Features The following telephony features are provided by the different models of Linksys IP phones. An aste...
Page 15 - Ensuring Voice Quality
1-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Linksys IP Phone Features SPA92x, SPA94x, SPA962 The SPA921, SPA922, SPA941, SPA942, and SPA962 provide an LCD display and additional features that are not provided with the SPA901, including the fo...
Page 16 - Feature Descriptions; SIP Proxy Redundancy; Supported Codecs
1-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Feature Descriptions Feature Descriptions Linksys IP phones are full featured, fully programmable IP phones that can be custom provisioned within a wide range of configuration parameters. This chapt...
Page 18 - Other Features
1-7 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Feature Descriptions Other Features Table 1-4 summarizes the features provided by Linksys IP Phones. Table 1-4 Linksys Phone Features Feature Description Music On Hold On a connected call, Linksys I...
Page 19 - Technology Background
1-8 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Technology Background Technology Background This section provides background information about the technology and protocols used by the phone: • Session Initiation Protocol, page 1-9 Voice Activity ...
Page 20 - Session Initiation Protocol; Using Linksys IP Phones with a Firewall or Router
1-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Technology Background • Using Linksys IP Phones with a Firewall or Router, page 1-9 • Using Linksys IP Phones with a Firewall or Router, page 1-9 Session Initiation Protocol Linksys 900 Series IP ph...
Page 21 - Network Address Translation; NAT Overview
1-10 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Technology Background Network Address Translation This section describes issues that arise when using the LVS system on a network behind a network address translation (NAT) device. It includes the ...
Page 22 - NAT Types
1-11 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Technology Background NAT Types The ways that NAT is implemented can be divided into the following categories: • Full cone NAT—Also known as one-to-one NAT. All requests from the same internal IP a...
Page 23 - SIP-NAT Interoperation
1-12 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 1 Introducing Linksys IP Phones Technology Background SIP-NAT Interoperation In the case of SIP, the addresses where messages/data should be sent to a Linksys IP phone system are embedded in the SIP messages sent by the device. I...
Page 24 - Getting Started; Linksys 900 Series IP Phones
2-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones 2 Getting Started This chapter describes the tools and utilities available for administering Linksys phones. It includes the following sections: • Linksys 900 Series IP Phones, page 2...
Page 25 - Caring for Your Hardware
2-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones Caring for Your Hardware The Linksys 900 Series IP phones are electronic devices that should not be exposed to excessive heat, sun, cold or water. To clean the equipment, use a slight...
Page 26 - Front Panel and Side of Phone
2-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones Front Panel and Side of Phone Back Panel SPA92x, SPA94x, and SPA962 Hardware Features The SPA941, SPA942, and SPA962 provide LCD displays and other additional hardware features, inclu...
Page 27 - Front Panel
2-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones • Built-In High Quality Microphone and Speaker • Headset Jack – 2.5 millimeter • Two Ethernet LAN ports (100BaseT RJ-45) • 802.3af Compliant Power over Ethernet (PoE) (not available o...
Page 28 - Back Panel
2-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Linksys 900 Series IP Phones Back Panel SPA922 The SPA922 is similar to the SPA921, but provides Power over Ethernet (PoE) and an extra Ethernet port for connecting another device to the LAN (see Figure 2-3 ). Th...
Page 32 - Establishing Connectivity
2-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started SPA9000 IP PBX System Front Panel Back Panel SPA9000 IP PBX System The SPA9000 IP PBX System (VoIP side), along with the SPA400, which is Internet Telephony Gateway, provides for an analog line and voicemail. The...
Page 33 - Bandwidth Requirements1; Installing the SPA900 Series IP Phone
2-10 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Establishing Connectivity • Installing the SPA900 Series IP Phone, page 2-10 Bandwidth Requirements1 Depending on how you have your IP phones configured, each call requires 55 to 110 kbps in each direction. Ther...
Page 34 - Assembling the Phone and Connecting to the Network; Attaching the Desk Stand; Mounting the Phone to the Wall
2-11 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Establishing Connectivity Assembling the Phone and Connecting to the Network Perform the following steps to connect Linksys IP phone. Step 1 Find the end of the coiled phone cord that has the longer straightened...
Page 35 - Turning on the Phone; Using the Administration Web Server; Connecting to the Administration Web Server
2-12 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Administration Web Server Turning on the Phone If you are using an external power source, instead of Power over Ethernet (PoE), plug the adapter to an electrical outlet. Use only the adapter supplied f...
Page 36 - Administrator Account Privileges
2-13 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Administration Web Server Changing between the tabs on the Voice page does not discard the unsubmitted changes. You can wait until completing all your changes on the Voice pages before submitting them....
Page 37 - Web Interface URLs; Upgrade URL; Resync URL
2-14 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Web Interface URLs Web Interface URLs The Linksys IP phone web interface supports several functions through special URLs: • Upgrade • Reboot • Resync Administrator account privilege is needed for these functions...
Page 38 - Reboot URL; Provisioning; Provisioning Capabilities; Configuration Profile
2-15 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Provisioning Reboot URL The Reboot URL lets you reboot the Linksys IP phone. Note The Linksys IP phone reboots only when it is idle. /admin/reboot">The Reboot URL is http://spa-ip-addr/admin/reboot. Provisioning...
Page 39 - Using the Interactive Voice Response Interface; Using the IVR Menu on a Linksys SPA901 Phone
2-16 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Interactive Voice Response Interface </flat-profile> Binary format profiles contain Linksys IP phone parameter values and user access permissions for the parameters. By convention, the profile us...
Page 42 - Entering a Password through the IVR
2-19 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 2 Getting Started Using the Interactive Voice Response Interface Note The items marked with “Requires Password” require a password only if the Administrator password is set. Entering a Password through the IVR To input the passwo...
Page 44 - Managing Linksys IP Phones; Using the 900 Series LCD Display; SPA900 Series LCD Display Controls
3-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the 900 Series LCD Display 3 Managing Linksys IP Phones This chapter describes how to configure Linksys IP phones and includes the following sections: • Using the 900 Series LCD Display, page 3-1...
Page 46 - Using Soft Keys
3-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the 900 Series LCD Display Using Soft Keys The LCD can display up to four options at one time. You can scroll through a longer list of options by pressing the Navigation button up or down. Pressi...
Page 47 - Entering and Saving Settings
3-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the 900 Series LCD Display Entering and Saving Settings The SPA900 Series phone GUI lets you enter alphanumeric and numeric inputs. You can enter the following data types into the phone: • Numeri...
Page 48 - Localization
3-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Localization When entering digits in numeric mode, enter the corresponding digits from the numeric key pad. When entering letters or symbols during alphanumeric mode, the phone shows a template of two ...
Page 51 - Using the SPA932 (Sidecar) with the SPA962
3-8 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the SPA932 (Sidecar) with the SPA962 Figure 3-4 Background Picture Parameters Step 4 Choose one of the following options from the Select Logo pull-down selection list to control what displays whe...
Page 52 - Configuring the Broadsoft Server for the SPA932
3-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the SPA932 (Sidecar) with the SPA962 Step 2 Configure the SIP proxy server: Step 3 Configure the SPA932 using the administration web server connected to the SPA962 to which the SPA932 is physical...
Page 53 - Configuring the Asterisk Server for the SPA932
3-10 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the SPA932 (Sidecar) with the SPA962 Step 1 On the Broadsoft server, in the user profile used by the SPA962 to register with the Broadsoft server, select Assign Services . Step 2 On the Assign S...
Page 54 - Configuring the SPA932
3-11 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using the SPA932 (Sidecar) with the SPA962 Example 3-2 Asterisk Subscribecontext for SPA932 [3500] type=friend secret=3500 callerid="spa3500"<3500> nat=no context=home mailbox=3500 Subsc...
Page 57 - Monitoring the SPA932; Configuring the Web Service; Web Interface Basic and Advanced Views; Configuration Parameters
3-14 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring the Web Service For instructions about how to configure phone extensions using the SPA Installation Wizard or the administration web server, refer to the SPA9000 Administration Guide . Ste...
Page 58 - Notes
3-15 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring the Web Service • phone configuration web page • remote provisioning In addition, a small subset of "user options" can be set via the phone’s GUI under various setup menus. On the ...
Page 59 - Data Types
3-16 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring the Web Service • Templates are compared in the order given. The first, not the closest , match is selected. The parameter name must match exactly. • If more than one definition for a para...
Page 64 - Call Appearances and Extensions
3-21 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Call Appearances and Extensions Call Appearances and Extensions A client station is a Linksys IP phone with one or more extensions and call appearances provisioned An extension in the Linksys IP phone...
Page 65 - Line Key LEDs; LED Script
3-22 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Line Key LEDs Line Key LEDs This section summarizes the behavior of the line key LEDS on Linksys IP phones with multiple line key status indicators. For more information, see “Line Key LED Pattern” se...
Page 66 - LED Script Examples; LED Pattern
3-23 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Line Key LEDs LED Script Examples LED Pattern The administrator can also specify a different color and pattern for each of the following states of the call appearance. • Idle: This call appearance is ...
Page 67 - Using Call Features; Selecting the Audio I/O Device and Line
3-24 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Using Call Features This section describes how the main call features are used or configured. It includes the following topics: • Selecting the Audio I/O Device and Line, page 3-24...
Page 68 - Making Calls
3-25 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features A line is selected by pressing the corresponding line key. To make or receive calls, you must select a call appearance (line key) or an audio device. If you select a call appearanc...
Page 69 - Hold and Resume
3-26 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Hold and Resume An active call can be placed on hold by explicitly pressing the Hold key, or by pressing another line key (to answer an incoming all, resume a held call, or start a...
Page 70 - Attended Call Transfer
3-27 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Once the conference starts, the 900 Series phone plays a special brief tone to all three parties to indicate that a conference call is in progress. The initiator of the conference ...
Page 71 - Call Back; Accessing Voicemail
3-28 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Call Back This service mimics the call back service offered by the PSTN. You can activate this service on a busy number so that you are called back as soon as the busy number becom...
Page 72 - Shared Call Appearances
3-29 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Shared Call Appearances The 900 Series phone supports shared call appearances in association with a Broadsoft application server. An extension can be shared by two or more stations...
Page 73 - Dialing Assistance
3-30 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Dialing Assistance Dialing assistance is an option you can enable or disable under the Preferences menu. If the option is enabled, the phone shows up to ten potential matches from ...
Page 74 - Audio Volume Adjustment
3-31 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features Each log is shown on the web page with the following syntax: name,ext-id,date-time stamp Where: • ext-id is the extension or phone number of the call peer. • name is the call peer ...
Page 75 - Managing Ring Tones
3-32 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Using Call Features UP/DOWN key press plays a short burst of the current ring tone. If one of the audio devices is selected, the volume adjustment applies to that device. The screen shows a pictorial ...
Page 76 - Configuring a Dial Plan; Dial Plan Digit Sequences
3-33 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring a Dial Plan Figure 3-8 Upload Ringtone Utility For input, you can use any .wav file less than eight seconds. Configuring a Dial Plan The Linksys IP phone allows each line to be configured ...
Page 77 - Dial Plan Rules; Digit Sequence Syntax
3-34 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring a Dial Plan The time-out duration depends on the matching state. If no candidate sequences are as yet complete (as dialed), the Interdigit_Long_Timeout applies. If a candidate sequence is ...
Page 78 - Intersequence Tones; Dial Plan Examples
3-35 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring a Dial Plan Intersequence Tones An “outside line” dial tone can be generated within a sequence by appending a comma (,) between digits. Thus, the sequence “9, 1xxxxxxxxxx” sounds an “outsi...
Page 79 - Dial Plan Timers; Interdigit Long Timer
3-36 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Configuring a Dial Plan The following also allows 7-digit US-style dialing, and automatically inserts a 1 + 212 (local area code) in the transmitted number. ( 1 xxx xxxxxxx | <:1212> xxxxxxx ) F...
Page 80 - Interdigit Short Timer; System Administration; Reboot and Restart
3-37 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones System Administration Interdigit Short Timer The <Interdigit_Short_Timer> specifies the default maximum time (in seconds) allowed between dialed digits, when at least one candidate digit sequenc...
Page 81 - Factory Reset
3-38 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones System Administration Factory Reset Factory reset resets all parameters to default value. The personal directory and call logs are also cleared. You must confirm this option before continuing. Passwor...
Page 82 - Using Star Codes to Activate/Deactivate Services
3-39 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones System Administration • <weekday> = 1, 2, 3,..., 7 (for Mon, Tue, ..., Sun), or 0. If <weekday> is 0, it means the date to start or end daylight saving is at exactly the given date. In tha...
Page 84 - Disabling Services
3-41 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones System Administration • Force G.726r24 (*0272624—Forces G.726r24 for next outbound call. • Force G.726r32 (*0272632)—Forces G.726r32 for next outbound call. • Force G.726r40 (*0272640)—Forces G.726r40...
Page 85 - Error and Log Reporting; Troubleshooting FAQ
3-42 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 3 Managing Linksys IP Phones Troubleshooting FAQ Error and Log Reporting The SPA Error Status Code (ESC) is used to indicate the current operation status of the SPA unit. An error state can be a relatively long transient state or...
Page 88 - SPA900 Series LCD Command Reference
4-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 4 SPA900 Series LCD Command Reference This chapter provides a systematic reference for the configuration and monitoring options available from the LCD display on SPA900 Series IP phones. All m...
Page 89 - Directory; Entering Names and Numbers into the Directory; Entering Directory Names, Numbers and Ring Default
4-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 1 Directory 1 Directory The directory stores the list of the phone numbers and names. This section describes how to enter and save phone numbers and names into the directory. It includes the f...
Page 90 - Speed Dial; Call History
4-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 2 Speed Dial Note Be sure to press the save button after entering information. Otherwise, the information is not saved and will not appear in the directory. 2 Speed Dial The Speed Dial option ...
Page 91 - Redial List; Ring Tone
4-4 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 4 Ring Tone Redial List Shortcut:: Setup, 3, 1 After selecting this option, the phone displays the call entries in the Redial List. The details of the call are displayed including the name if ...
Page 92 - Block Anonymous Call
4-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 5 Preferences • 5.1 Block Caller ID • 5.2 Block Anonymous callers • 5.3 Do Not Disturb • 5.4 Secure Call • 5.5 Dial Assistance • 5.6 Preferred Audio Device • 7 Auto Answer Page • 8 Send Audio ...
Page 93 - Preferred Audio Device
4-6 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 5 Preferences From the Preferences menu, press 3 or scroll down until the selection is highlighted and then press the edit soft key. This option is on the second preferences screen so scroll p...
Page 94 - Miss Call Shortcut; Call Forward
4-7 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 6 Call Forward Use the option soft key to toggle between the two options, Speaker or Handset. With the desired selection displayed, press ok . The display returns to the Preferences menu. 5.9 ...
Page 95 - CFWD No Ans Number
4-8 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 7 Time/Date 6.1 CFWD All Number Shortcut: Setup, 6, edit, phone_number , Ok This option forwards all calls to the specified number. Enter the phone number for calls to be forwarded using the s...
Page 96 - Voice Mail
4-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 8 Voice Mail • Offset— +/-H:m:s To enter a / or : use the * (star) key. For offset value, use the * (star) key for + and the # (pound) key for - . After entering the required values, press the...
Page 97 - Current IP Address
4-10 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 9 Network 9.1 DCHP Shortcut: Setup, 9, edit, y/n, ok When DHCP is enabled, the phone obtains its IP address from a DHCP server. To view DHCP status, press the Setupbutton and press 9, or scro...
Page 98 - Enable Web Server
4-11 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 9 Network • Receive the address from a DHCP server (you cannot edit it) • Manually set the address using the Non DHCP Default Route option (Option 9.10) 9.7 Enable Web Server Shortcut: Setup,...
Page 99 - Multicast Address
4-12 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 9 Network 9.13 Non DHCP NTP Server 1 Shortcut: Setup, 9, 13, ip_address , ok The Network Time Protocol (NTP) server sets the time used by the IP phone. To edit the primary NTP server used by ...
Page 100 - 0 Product Info; Software Version
4-13 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 10 Product Info 9.18 CDP Shortcut: Setup, 9, 18, y/n, ok To enable Cisco Discovery Protocol (CDP), which allows Cisco devices to discover one another automatically, press 18 from the Network ...
Page 101 - Hardware Version
4-14 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 11 Status 10.4 Hardware Version Shortcut: Setup, 10, 4, select To view the hardware version, press 4 from the Product Info menu or scroll down to highlight Hardware Version and press the sele...
Page 102 - Phone
4-15 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 11 Status Phone Shortcut: Setup, 11, select To view the phone status, press the Setup button and then 11 or scroll down to Status and press the select soft key. The display provides the date ...
Page 103 - 4 Factory Reset
4-16 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 12 Reboot 12 Reboot Shortcut: Setup, 12, ok This option lets you reboot the phone. To select Reboot, press the Setup button and press 12 , or scroll down until the selection is highlighted an...
Page 104 - 6 Set Password; 7 Set LCD Contrast
4-17 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 4 SPA900 Series LCD Command Reference 16 Set Password 16 Set Password Shortcut:: Setup, 16, password , ok This option lets you set a password to protect the phone from unauthorized use. To select this option, press the Setup butt...
Page 106 - Linksys IP Phone Field Reference
5-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference 5 Linksys IP Phone Field Reference This chapter describes the fields within each section of the following administration web server pages: • Info Tab, page 5-2 • System Tab, page 5-6 • SIP Tab, p...
Page 107 - Info Tab; System Information
5-2 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Info Tab Info Tab This section describes the fields for the following headings on the Info tab: • System Information, page 5-2 • Product Information, page 5-2 • Phone Status, page 5-3 Note The fi...
Page 108 - Phone Status
5-3 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Info Tab Phone Status Ext 1/2/3/4/5/6 Status ) Field Description Current Time Current date and time of the system; for example, 10/3/2003 16:43:00. Elapsed Time Total time elapsed since the last ...
Page 110 - Downloaded Ring Tone
5-5 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Info Tab Downloaded Ring Tone Round Trip Delay Number of milliseconds for delay. Packets Lost Number of packets lost. Packet Error Number of invalid packets received. Mapped RTP Port The port map...
Page 111 - System Tab; System Configuration
5-6 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference System Tab System Tab This section describes the fields for the following headings on the System tab: • System Configuration, page 5-6 • Internet Connection Type, page 5-6 • Optional Network Conf...
Page 112 - Static IP Settings; PPPoE Settings; Optional Network Configuration
5-7 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference System Tab Static IP Settings Note None of the following parameters apply to the SPA901. PPPoE Settings Note None of the following parameters apply to the SPA901. Optional Network Configuration G...
Page 113 - VLAN Settings
5-8 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference System Tab VLAN Settings Note None of the following parameters apply to the SPA901. Secondary DNS DNS server used by Linksys IP phone in addition to DHCP supplied DNS servers if DHCP is enabled; ...
Page 114 - SIP Tab; SIP Parameters
5-9 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab SIP Tab This section describes the fields for the following headings on the SIP tab: • SIP Parameters, page 5-9 • SIP Timer Values (sec), page 5-11 • Response Status Code Handling, page 5...
Page 118 - Response Status Code Handling
5-13 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab Response Status Code Handling RTP Parameters Field Description SIT1 RSC SIP response status code for the appropriate Special Information Tone (SIT). For example, if you set the SIT1 RSC ...
Page 119 - SDP Payload Types
5-14 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab SDP Payload Types The configured dynamic payloads are used for outbound calls only where the Linksys IP phone presents the SDP offer. For inbound calls with a SDP offer, the Linksys IP p...
Page 121 - NAT Support Parameters
5-16 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab NAT Support Parameters Note None of the following parameters apply to the SPA901. G729a Codec Name (not applicable to SPA901) G.729a codec name used in SDP. Defaults to G729a. G729b Code...
Page 122 - Linksys Key System Parameters
5-17 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference SIP Tab Linksys Key System Parameters STUN Enable Enables the use of STUN to discover NAT mapping. Select yes or no from the drop-down menu. Defaults to no. STUN Test Enable If the STUN Enable f...
Page 123 - Provisioning Tab
5-18 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Provisioning Tab Provisioning Tab For information about the Provisioning page, see the Linksys SPA Provisioning Guide .
Page 124 - Regional Tab; Call Progress Tones
5-19 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Regional Tab This section describes the fields for the following headings on the Regional tab: • Call Progress Tones, page 5-19 • Distinctive Ring Patterns, page 5-20 • Control Time...
Page 125 - Distinctive Ring Patterns
5-20 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Distinctive Ring Patterns Note None of the following parameters apply to the SPA901. Confirm Tone Brief tone to notify the user that the last input value has been accepted. Defaults...
Page 127 - Vertical Service Activation Codes
5-22 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Vertical Service Activation Codes The following Vertical Service Activation Codes are automatically appended to the dial-plan. Note Some of the following parameters do not apply to ...
Page 130 - Vertical Service Announcement Codes; Outbound Call Codec Selection Codes
5-25 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Vertical Service Announcement Codes Note None of the following parameters apply to the SPA901. • Service Annc (Annoucement) Base Number: Defaults to blank. • Service Annc (Announcem...
Page 132 - Miscellaneous
5-27 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Regional Tab Miscellaneous Note Only the first four parameters apply to the SPA901: • Set Local Date • Set Local Time • Time Zone • Time Offset Force G729a Code Makes this codec the only codec t...
Page 136 - Miscellaneous Line Key Settings
5-31 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Phone Tab Miscellaneous Line Key Settings This section does not apply to the WIP310 wireless phone. Line Key LED Pattern Line key LED colors are described in “Line Key LEDs” section on page 3-22...
Page 138 - Supplementary Services
5-33 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Phone Tab Supplementary Services Enable or disable the corresponding supplementary services on the phone. A value of “yes” indicates enabled; “no” indicates disabled. Note Some of the parameters...
Page 139 - Ring Tone
5-34 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Phone Tab Ring Tone Each entry defines a ring tone to be used on the phone, with an ID between 1 and 10. The ID can be used in a DirEntry to indicate which ring tone to use when the correspondin...
Page 140 - Extension Mobility
5-35 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Phone Tab Auto Input Gain (dB) This section does not apply to the WIP310 wireless phone. Extension Mobility Note Some of the parameters in this section do not apply to the WIP310 wireless phone....
Page 141 - Ext Tab
5-36 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Ext Tab The Ext tabs vary by phone: • SPA901: Ext 1 tab • SPA942: Ext 1, 2, 3,and 4 tabs • SPA962: Ext 1, 2, 3, 4, 5, and 6 tabs This section describes the fields for the following Ext t...
Page 142 - Share Line Appearance
5-37 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Share Line Appearance NAT Settings Network Settings Note Some of the parameters in this section do not apply to the WIP310 wireless phone. None of the following parameters apply to the S...
Page 143 - SIP Settings
5-38 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab SIP Settings Note Some of the parameters in this section do not apply to the WIP310 wireless phone. Only the SIP Port and SIP Debug Option parameters apply to the SPA901. Field Descripti...
Page 145 - Call Feature Settings
5-40 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Call Feature Settings Note Many of the following parameters do not apply to the SPA901. SIP Debug Option SIP messages are received at or sent from the proxy listen port. This feature con...
Page 146 - Proxy and Registration
5-41 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Proxy and Registration Note Many of the following parameters do not apply to the SPA901. MOH Server User ID or URL of the auto-answering streaming audio server. When only a user ID is sp...
Page 148 - Subscriber Information; Audio Configuration
5-43 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Subscriber Information Note Many of the following parameters do not apply to the SPA901. Audio Configuration A codec resource is considered as allocated if it has been included in the SD...
Page 151 - Dial Plan
5-46 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference Ext Tab Dial Plan Note The following parameters do not apply to the SPA901. The default dial plan script for each line is as follows: (*xx|[3469]11|0|00|[2-9]xxxxxx|1xxx[2-9]xxxxxx|xxxxxxxxxxxx....
Page 153 - User; Call Forward; Speed Dial
5-48 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference User User This section describes the fields for the following headings on the User tab: • Call Forward, page 5-48 • Speed Dial, page 5-48 • Supplementary Services, page 5-48 • Web Information Se...
Page 154 - Web Information Service Settings (SPA962); Traffic Service Information Settings (SPA962)
5-49 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference User Web Information Service Settings (SPA962) Note The following parameters apply only to the SPA962. . Traffic Service Information Settings (SPA962) Note The following parameters apply only to...
Page 155 - Audio Volume; Phone GUI Menu Color Settings (SPA962 only)
5-50 Linksys IP Phone Administrator Guide Firmware Version 5.1 Chapter 5 Linksys IP Phone Field Reference User Audio Volume Note Many of the following parameters do not apply to the SPA901. Phone GUI Menu Color Settings (SPA962 only) Note The following parameters apply only to the SPA962. Chose from...
Page 160 - Acronyms
A-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 Appendix A Acronyms A Acronyms A/D Analog To Digital Converter ANC Anonymous Call B2BUA Back to Back User Agent BLF Busy Lamp Field Bool Boolean Values. Specified as “yes” and “no”, or “1” and “0” in the profile CA Certificate Authority C...
Page 164 - Glossary
B-1 Linksys IP Phone Administrator Guide Firmware Version 5.1 Appendix B Glossary B Glossary ACD (Automatic Call Distribution)—A switching system designed to allocate incoming calls to certain positions or agents in the order received and to hold calls not ready to be handled (often with a recorded ...