Page 3 - Introduction; The Linksys Phoneline 10M Integrated PC Card; Table of Contents
Linksys HomeLink Series Phoneline 10M Integrated PC Card Introduction The Linksys Phoneline 10M Integrated PC Card Congratulations on your purchase of the Linksys HomeLink Phoneline 10MIntegrated PC Card. The Linksys HomeLink Phoneline 10M Integrated PCCard now offers instant connectivity to multipl...
Page 4 - LEDs
Phoneline 10M Integrated PC Card Getting to Know the Phoneline 10MIntegrated PC Card LEDs Link The green LED will remain lit when the Phoneline 10MIntegrated PC Card is connected. Rx The Receive LED will blink green when data is beingreceived across the the phone cable. Tx The Transfer LED will blin...
Page 5 - Connecting to a Phoneline Network; Connect one end of your telephone cabling to your Phoneline 10M; Your computer is now connected to your Phoneline network.; • If your computer runs Windows 98 or ME, go to page 6 now for instruc-; na
Connecting to a Phoneline Network Computers on a HomeLink network can be connected in one of two ways.They can be daisy chained through their HomeLink port to anotherHomeLink PC in a string, or they can be connected directly to a phone jack.The diagram below shows a HomeLink phoneline network that u...
Page 6 - Overview; When the Add New Hardware Wizard window appears, insert the
Phoneline 10M Integrated PC Card 4. Select Search for the best driver for your device (Recommended). Click Next. 5. Select "CD-ROM drive". Click Next to continue. 6. A window will open saying that Windows is now ready to install the Linksys Phoneline 10M Integrated PC Card driver (seen on th...
Page 7 - Under no circumstance are you to click; Cancel; or
Phoneline 10M Integrated PC Card 9 Linksys HomeLink Series 8 8. Windows will f inish installing the software onto your PC. Click Finish. 9. When asked if you want to restart your PC, remove the Driver CD and click Yes. 10. If Windows does not ask you to restart your PC, click the Start button, choos...
Page 8 - want to be able to allow others to print to my printer.
Linksys HomeLink Series 4. If you'd like others to be able to access the f iles on your PC's hard drive, select I want to be able to give others access to my files. 5. If you'd like to share your printer with other users on the network, select I want to be able to allow others to print to my printer...
Page 9 - Click the OK button. Your system may or may not ask you for your
11. Optional: Choose the Access Control tab. Ensure that Shared-level access control is selected. If the setting is on User-Level access controland you can’t change it, skip to problem 6 in the Troubleshooting section. 12. Click the OK button. Your system may or may not ask you for your Windows CD-R...
Page 10 - Once you are at the Windows desktop, double-click on the Network
15 Windows 2000 Installation &Setup Overview After physically installing the Phoneline 10MIntegrated PC Card in your computer, followthese instructions to install the network driver.The installation procedure for the network driverwill vary slightly depending on which version ofWindows 2000 you ...
Page 11 - The Driver File Search Results dialog box will appear. Click Next.; with your system administrator.
17 Linksys HomeLink Series 16 5. The Driver File Search Results dialog box will appear. Click Next. 6. The Completing the Found New Hardware Wizard dialog box willappear. Click Finish. 7. Remove the CD from the CD-ROM drive. NOTE: Windows 2000 will not ask require you to restart your computer. The W...
Page 12 - Troubleshooting
19 Linksys HomeLink Series 18 6. On the Access Control Tab, User Level Access is selected, but Shared Level Access is grayed out and not accessible. • You previously had your primary network logon set to Client for NetWare Networks. On the Configuration tab of the Network Properties window,ensure th...
Page 13 - Appendix; Sharing Your Files and Printers
21 Appendix Sharing Your Files and Printers Overview By sharing your f iles and printers, other PCs on your network will be able toaccess the resources on your PC. Before sharing your f iles and printers, you should prepare your computer tobe used with any f ile servers that may be on the network. I...
Page 16 - ble-click the System icon.The System Properties window will open.
27 Linksys HomeLink Series 26 Starting Over in Windows 2000 1. Click the Start button, choose Settings, choose Control Panel, then dou- ble-click the System icon.The System Properties window will open. 2. Choose the Hardware tab. 3. Click the Device Manager button. The Device Manager window will ope...
Page 17 - Manually Installing the Network Components in Windows
29 Linksys HomeLink Series 5. Right-click on HomeLink Phoneline 10M Integrated Adapter. A pop-up menu should open (below). 6. First, choose Disable. 7. When asked if you want to Disable the device, click Yes. 8. Right-click on the HomeLink Phoneline 10M Integrated Adapter again. This time, select Un...
Page 19 - Contact Information; Warranty Information
Contact Information For help with the installation or operation of this product, contact LinksysCustomer Support at one of the phone numbers or Internet addresses below. Sales Information 800-546-5797 (LINKSYS) Tech Support 800-326-7114 RMA Issues 949-261-1288 Fax 949-261-8868 Email support@linksys....