Linksys HPN200 - Manual

Windows 98 & ME Installation and Setup Overview After physically installing the HomeLink ® card in your notebook computer, follow these instructions to install the device driver. The installation procedurefor the device driver will vary slightly depending on which version of Windows98 or ME you ...

6. A window will open saying that Windows is now ready to install the Linksys Phoneline 10M Network Card driver. Click the Next button. 7. Windows will begin copying the HomeLink ® card’s driver f iles to your PC. Refer to the chart below to help guide you through the process. Phoneline 10M Network ...

Windows NT 4.0Installation and Setup Overview After installing the HomeLink ® hardware in your computer, follow these instructions for installing the network driver in Windows NT 4.0. The installa-tion procedure for the network driver may vary slightly depending on the ver-sion of Windows NT you are...

15. NT will ask you to enter a Workgroup or Domain name. If you are unsure as to what your Workgroup or Domain name should be, consult your net-work administrator or your Windows NT documentation. Enter the correctinformation and click the Next button. 16. Click the Finish button, and when you are a...

Windows 2000 Installation and Setup Overview After physically installing the Phoneline 10MNetwork Card in your computer, follow theseinstructions to install the network driver. Theinstallation procedure for the network driver willvary slightly depending on which version ofWindows 2000 you are using,...

5. The Driver File Search Results dialog box will appear. Click the Nextbutton. 6. The Completing the Found New Hardware Wizard dialog box will appear. Click the Finish button. 7. Remove the CD from the CD-ROM drive. NOTE: Windows 2000 will not ask you to restart your computer but it is recommended ...

10M Phoneline Network Card 27 26 4. In Network Neighborhood I can only see myself and no other computers on the network. • Make sure that the cables are connected correctly. Make sure you are get- ting Link or Activity lights on both the HomeLink ® Card. Try changing to a new cable that you know is ...

29 28 Appendix There may be times when you might need to manually install missing Windowsnetworking components. 1. Click on the Start button, select Settings, Control Panel, and then double- click on the Network icon. 2. Click on the Configuration tab. Make sure that the following network com- ponen...

31 30 After following the preparation instructions, double-click on your MyComputer icon. A window of available disk drives will appear. Using yourright mouse button, click once on the drive or folder that you want to makeavailable to other users. Click on Sharing, followed by the Sharing tab. Click...

33 After following the steps on the previous pages, double-click on your MyComputer icon. Click on the previous pages, a window of available printerswill appear. Using your right mouse button, click once on the printer that you want to sharewith other users. Click on Sharing, followed by the Sharing...

34 Glossary Daisy Chain - Connected in series, one after the other. Transmitted signals goto the f irst device, then to the second and so on. DHCP (Dynamic Host Conf iguration Protocol) - A protocol that lets networkadministrators manage centrally and automate the assignment of InternetProtocol (IP)...

Dimensions: 4.75” x 2.56” x 0.5”(120mm x 65mm x 13mm) Unit Weight: 3 oz. (85.05 g) Power: 2W Maximum Certifications: FCC Class B, CE Mark Commercial Operating Temperature: 0°C - 50°C (32°F - 122°F) Storage Temperature: -20°C - 70°C (-4°F - 158°F) Operating Humidity: 10% - 85% Non-Condensing Storage ...